Anzzi CHAND 1344311 User manual

110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)
SOAKING FREESTANDING BATHTUB
INSTALL & OPERATION MANUAL
V2.2
CHAND
DON’T WAIT!
REGISTER NOW!
Register your product within 30 days to ensure your bathtub is
recognized as an ofcial purchase and is eligible for warranty
coverage.
Mail in the completed registry card (Pg. 2) or register online
at www.ANZZI.com/register.
Item: 1344311 / 2344311

2Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
PRODUCT REGISTRATION*
IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS
FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED.
To ensure that your warranty is registered and conrmed please do one of the following:
1. Register online at www.ANZZI.com/register. You will be asked to fill out the same
information you would in the registration card. Registering online is fast, secure and
ensures we receive your information.
2. Complete,cut-outandmailtheregistrationcardbelow.Byreturningthisregistration
card we confirm the date of purchase for your new product. This confirmation will allow
us to process any warranty claims.
Mail the card to: 5701 NW 35 Avenue, Miami, FL 33142
Product Registration Card
Name ..................................................................................... Address ...........................................................................................................................
City ............................................... State ........................... Zip ..............................
Phone ........................................... Email....................................................................
Date of Purchase...........................
Installer’s Name ..................................................................... Phone ................................................................................
I have read the Owner’s Manual carefully and understand and agree that any installation, operation or maintenance of the walk-in bathtub must be
done strictly in accordance with instructions and guidelines contained in the owner’s manual and installation guide.
Signature____________________________________________________________Date______________________________________________
CUT ALONG
DOTTED LINE.

3
Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
FREESTANDING BATHTUB
CHAND
ANZZITM 2019. ALL RIGHTS RESERVED.
67.7”
32.3”
18.9”
43.3”
R1.77”
DRAIN
OUTER LENGTH
OUTER
WIDTH
23.6”
OUTER
HEIGHT
BASIN
WIDTH
BASIN LENGTH
1.1”
DECK/LIP
THICKNESS

4Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
SAVE THIS MANUAL!
READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCTS. FAILURE TO DO SO
COULD RESULT IN AN IMPROPER INSTALLATION AND COULD VOID THE WARRANTY.
RESPONSIBILITY OF THE INSTALLER!
THE INSTALLER MUST INSPECT AND WATER TEST THE PRODUCT PRIOR TO INSTALLATION TO ENSURE THE UNIT IS FREE OF
DEFECT OR DAMAGE. IN THE EVENT OF A PROBLEM, THE UNIT MUST NOT BE INSTALLED. IF THE CRATE OR THE PRODUCT
HAS BEEN DAMAGED DURING SHIPPING, PLEASE CALL US IMMEDIATELY.
THIS PRODUCT MUST BE INSTALLED BY A LICENSED/CERTIFIED CONTRACTOR!
LICENSED PLUMBERS AND ELECTRICIANS SHOULD BE EMPLOYED TO INSURE PROPER INSTALLATION. INSTALLERS
ASSUME ALL LIABILITY FOR THE CORRECT INSTALLATION PROCEDURES. ONLY ACCESSORIES AUTHORIZED BY THE
MANUFACTURER SHOULD BE USED WITH THIS PRODUCT.
REPORT DAMAGES RIGHT AWAY! REPORT ANY DAMAGES TO THE BATHTUB WITHIN 5 BUSINESS DAYS. ANY DAMAGES
DONE BEYOND THAT WILL BE ASSUMED TO HAVE HAPPENED DURING AND AFTER THE INSTALLATION.
TEST THE TUB BEFORE INSTALLATION! BEFORE PERMANENTLY INSTALLING THE BATHTUB, YOUR INSTALLER MUST TEST
THE BATH. USE THE PROVIDED FLEX DRAIN, PLUG IN THE TUB AND POWER IT ON. FILL TUB AND INSPECT FOR ANY LEAKING.
ONLY IF THERE ARE NO SIGNS OF MALFUNCTION OR LEAKAGE SHOULD YOU PROCEED TO PERMANENTLY INSTALL THE
UNIT.
LEVEL THE TUB AND AVOID LEAKAGE! CHECK THE AREA PRIOR TO INSTALLATION. USE THE CHAND’S ADJUSTABLE FEET TO
ENSURE THE BATHTUB IS PERFECTLY LEVEL. IT IS ESSENTIAL THAT ALL THE FEET ARE TOUCHING THE FLOOR/SURFACE. AN
UNLEVELED TUB WILL RESULT IN LEAKAGE.

5
Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
SAFETY INSTRUCTIONS
READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCTS. FAILURE TO DO SO
COULD RESULT IN AN IMPROPER INSTALLATION AND COULD VOID THE WARRANTY.
IMPORTANT SAFETY INSTRUCTIONS. INSTRUCTIONS IMPORTANTES RELATIVES A LA SECURITE.
READ AND FOLLOW ALL INSTRUCTIONS. LIRE ET SUIVRE TOUTES LES INSTRUCTIONS.
SAVE THESE INSTRUCTIONS. CONSERVER CES INSTRUCTIONS.

6Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
UNPACK THE BATHTUB
REMOVE THE BATHTUB FROM THE BOX AND PREPARE THE FOLLOWING TOOLS.
110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)
110-240V
LEVELER
RULER
ADJUSTABLE
WRENCH
TEFLON
TAPE
FLEXIBLE
DRAIN
included
(AC110-240V/300W-400W)
NOTE: THE INCLUDED FLEXIBLE DRAIN IS TO BE USED ONLY TO TEST THE BATHTUB BEFORE
PERMANENT INSTALLATION. IT IS THE RESPONSIBILITY OF THE INSTALLER TO PROVIDE THE
PERMANENT DRAIN ASSEMBLY.

7
Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
* All CHAND bathtubs are 100% water tested at the factory and certified to be free
of leaks.Transportation and mishandling may cause leaks. It is necessary to test the
bathtub while there is access to all sides of the bathtub.
TEST THE BATHTUB WHILE YOU HAVE ACCESS TO THE
BOTTOM AND BEFORE PERMANENTLY INSTALLED.
READ AND FOLLOW ALL INSTRUCTIONS
• Place the tub on a completely flat surface in an area where it may be drained after testing.
• Close the drain and fill the tub about half way.
• Allow the water to stand in tub for 30 minutes and then inspect all plumbing and seals for leaks.

8Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
INSTALLING THE BATHTUB
MOVE THE BATHTUB TO THE SELECTED INSTALLATION POSITION, (MAKE SURE THAT THE FLOOR
SURFACE CAN SUPPORT THE LOAD CAPACITY), AND PLACE IT IN THE PROPER (OR DESIRED)
ORIENTATION. THEN USE A LEVEL TO ENSURE THE TUB SURFACE IS LEVEL. IF NOT, LIFT ONE END
OF THE BATHTUB, AND LOOSEN THE ADJUSTING NUT ON THE TUB FOOT AS SHOWN IN THE FIGURE.
AFTER ADJUSTING THE LEVELING FOOT TO A SUITABLE POSITION, THEN TIGHTEN SECURING NUT.
WARNING: MAKE SURE THE TUB IS PERFECTLY LEVEL TO PREVENT LEAKAGE. USE THE ADJUSTABLE
LEVELING FEET TO ENSURE A LEVEL TUB. ALL LEVELING FEET MUST MAKE CONTACT WITH THE
FLOOR / SURFACE.

9
Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com
SEAL TUB
ADD A BEAD OF SILICONE AROUND THE BASE OF THE BATHTUB AND ALLOW 24 HOURS TO PASS
BEFORE USE TO ENSURE THE SILICONE HAS SET.
FILL THE BATHTUB
FINALLY FILL THE BATHTUB WITH WATER.

10 Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com