AOC AGON PORSCHE DESIGN PD27S User manual

1
简易说明书
PD32M
USER MANUAL
PD27S
User Manual
www.aoc.com
©2022 AOC. All rights reserved

i
Safety ................................................................................................................................................................................... 1
National Conventions ................................................................................................................................................ 1
Power ........................................................................................................................................................................ 2
Installation ................................................................................................................................................................. 3
Cleaning .................................................................................................................................................................... 4
Other ......................................................................................................................................................................... 5
Setup .................................................................................................................................................................................... 6
Contents in Box......................................................................................................................................................... 6
Setup Stand & Base.................................................................................................................................................. 7
Adjusting the monitor ................................................................................................................................................ 8
Connecting the Monitor ............................................................................................................................................. 9
Adaptive-Sync function .......................................................................................................................................... 10
HDR .........................................................................................................................................................................11
Adjusting............................................................................................................................................................................. 12
Hotkeys ................................................................................................................................................................... 12
OSD Setting ............................................................................................................................................................ 13
Game Setting............................................................................................................................................... 14
Luminance ................................................................................................................................................... 15
Image Setup ............................................................................................................................................... 16
Color Setup.................................................................................................................................................. 17
Audio............................................................................................................................................................ 18
Light FX ....................................................................................................................................................... 19
Extra ............................................................................................................................................................ 20
OSD Setup................................................................................................................................................... 21
LED Indicator .......................................................................................................................................................... 22
Troubleshoot....................................................................................................................................................................... 23
Specication ....................................................................................................................................................................... 24
General Specication .............................................................................................................................................. 24
Preset Display Modes ............................................................................................................................................. 25
Pin Assignments...................................................................................................................................................... 26
Plug and Play .......................................................................................................................................................... 27

1
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes,
cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear
in alternate formats and may be unaccompanied by an icon. In such cases, the specic presentation of the warning is mandated by
regulatory authority.

2
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power
supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will t only into a
grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the
correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from
damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate congured receptacles
marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.

3
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause
serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this
product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the
manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts, causing a re or electric shock. Never
spill liquids on the monitor.
Do not place the front of the product on the oor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
WARNING: SUPPLY LINES! DANGER TO LIFE BY ELECTRIC SHOCK!
Take appropriate measures to avoid damaging supply lines (electric, gas, water) during wall mounting.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate, hence overheating may
cause a re or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:
Installed with stand
Installed with stand
12 inches
30cm
4 inches
10cm
4 inches
10cm
4 inches
10cm
Leave at lease this
space around the set

4
Cleaning
Clean the cabinet regularly with a water-dampened, so cloth.
When cleaning use a so cotton or microber cloth. The cloth should be damp and almost dry, do not allow liquid into the case.
Please disconnect the power cord before cleaning the product.

5
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the packaging material. The packaging material poses a suocation hazard. Children frequently
underestimate dangers.
Always keep children away from the product.
Keep all documents for future use. When passing this product on to third parties, please include the installation instructions and
safety notes.
Do not place the device near a heat source and protect it from direct sunlight.
Never expose the device to humidity, condensation or moisture.

6
Setup
Contents in Box
*
*
*
*
*
Monitor
Power Cable
Warranty Card
USB CableDP Cable HDMI Cable Micphone Cable
Adapter
Stand/BasePorsche Design USB Stick
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch oce for
conrmation.
For use only with the attached power adapter
Manufacturers: TPV ELECTRONICS (FUJIAN) CO.,LTD.
Model:ADPC20120 (output: 20Vdc,6.0A)

7
Setup Stand & Base
Please setup or remove the base following the steps as below.
Setup:
2
Remove:
3
2

8
Adjusting the monitor
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:
-5
°
21
°
150
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

9
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
3 5
24
1 8 10
7911
6
1. DC IN
2. USB UP
3. USB+fast charging
4. USB 3.2 Gen1
5. Microphone in
6. Earphone (Combined with Microphone)
7. HDMI1
8. HDMI2
9. DP IN1
10. DP IN2
11. Microphone out (Connect to PC)
Connect to PC
1. Connect the power cord to the back of the display rmly.
2. Turn o your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
To protect equipment, always turn o the PC and LCD monitor before connecting.

10
Adaptive-Sync function
1. Adaptive-Sync function is working with DP/HDMI
2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
• Radeon™ RX Vega series
• Radeon™ RX 500 series
• Radeon™ RX 400 series
• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
• Radeon™ Pro Duo (2016)
• Radeon™ R9 Nano series
• Radeon™ R9 Fury series
• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

11
HDR
It is compatible with input signals in HDR10 format.
The display may automatically activate the HDR function if the player and content are compatible. Please contact the device
manufacturer and the content provider for information on the compatibility of your device and content. Please select “OFF” for the HDR
function when you have no need for automatical activation function.
Note:
1. No special setting is needed for the DisplayPort/HDMI interface in WIN10 versions lower (older) than V1703.
2. Only the HDMI interface is available and the DisplayPort interface cannot function in WIN10 version V1703.
a. The display resolution is set to 2560*1440, and HDR is preset to ON. Under these conditions, the screen may slightly dim, indicating
HDR has been activated.
b. Aer entering an application, the best HDR eect can be achieved when the resolution is changed to 2560*1440 (if available).
3
1
4
2
2560 x 1440
2560 x 1440
Use HDR
On
HDR: ON

12
Adjusting
Hotkeys
4
1
3
5
2
1 Source / Up
2 Dial Point / Down
3 Game Mode / Le
4 Light FX / Right
5Power / Menu / Enter
Power/Menu/Enter
Press the Power button to turn on the monitor.
When there is no OSD, Press to display the OSD or conrm the selection. Press about 2 seconds to turn o the monitor.
Dial Point/Down
When there is no OSD, press Dial Point button to show / hide Dial Point.
Game Mode/Le
When there is no OSD, press ”Le” key to open game mode function, then press ”Le” or “Right” key to select game mode (FPS, RTS,
Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the dierent game types.
Light FX/Right
When there is no OSD, press “Right” key to active Light FX function.
Source/Up
When the OSD is closed, press Source/Up button will be Source hot key function.

13
OSD Setting
Basic and simple instruction on the control keys.
1). Press the MENU-button to activate the OSD window.
2). OSD Lock/Unlock Function: To lock or unlock the OSD, press and hold the Down–button for 10s while OSD function is not active.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). ECO modes (except Standard mode), DCR and DCB mode , for these three states that only one state can exist.

14
Game Setting
Game Setting
Game Mode O
Shadow Control 50
Game Color 10
MBR 0
Adaptive-Sync On
Overdrive O
Low Input lag
On
Frame Counter O
Game Mode
FPS For playing FPS (rst Person Shooters) games. Improves dark theme black
level details.
RTS For playing RTS (Real Time Strategy). Improves the image quality.
Racing For playing Racing games. Provides fastest response time and high color
saturation.
Gamer 1 User’s preference settings saved as Gamer 1.
Gamer 2 User’s preference settings saved as Gamer 2.
Gamer 3 User’s preference settings saved as Gamer 3.
O No optimization by Smart image game
Shadow Control 0-100
Shadow Control Default is 50, then end-user can adjust from 50 to 100 or
0 to increase contrast for clear picture.
1. If picture is too dark to be saw the detail clearly, adjusting from 50 to
100 for clear picture.
2. If picture is too white to be saw the detail clearly, adjusting from 50 to
0 for clear picture
Game Color 0-20 Game Color will provide 0-20 level for adjusting saturation to get better
picture.
MBR 0-20 Adjust the Motion Blur Reduction.
Adaptive-Sync On / O Enable or Disable Adaptive-Sync.
Overdrive Weak / Medium / Strong /
Boost / O Adjust the response time.
Low Input lag On / O Turn o frame buer to decrease input lag
Frame Counter O / Right-Up / Right-Down
/ Le-Down / Le-Up
Display V frequency on the corner selected
(Frame counter feature only works with AMD graphic card.)
Note:
1) The function MBR and Overdrive Boost are avdilable only when Adaptive-Sync is o and the vertical frequency is up to
75Hz.
2) The screen brightness will be reduced when adjusting MBR or Overdrive setting to Boost.
3) When HDR is set to “non-o” under “Image Setup” and the input source has HDR content, “Game Mode”, “Shadow Control”, “Game
Color”, “MBR” items cannot be adjusted under “Game Setting”. “Boost” under “Overdrive” is not available.

15
Luminance
Luminance
Contrast 50
Brightness 70
Eco Mode Standard
Gamma Gamma1
DCR O
Contrast 0-100 Contrast from Digital-register.
Brightness 0-100 Backlight Adjustment
Eco Mode
Standard Standard Mode
Text Text Mode
Internet Internet Mode
Game Game Mode
Movie Movie Mode
Sports Sports Mode
Reading Reading Mode
Gamma
Gamma1 Adjust to Gamma 1
Gamma2 Adjust to Gamma 2
Gamma3 Adjust to Gamma 3
DCR O / On Disable or Enable dynamic contrast ratio
Note:
When the HDR setting under “Image Setup” is set to “non-o” and the input source has HDR content, “Luminance ”is not adjustable.

16
Image Setup
Image Setup
HDR Mode O
HDR
O / DisplayHDR / HDR
Picture / HDR Movie / HDR
Game
Disable or Enable HDR
HDR Mode O / HDR Picture / HDR
Movie / HDR Game Disable or Enable HDR Mode
Note:
When HDR is detected, the HDR option is displayed for adjustment; when HDR is not detected, the HDR Mode option is displayed for
adjustment.

17
Color Setup
Color Setup
LowBlue Mode O
Color Temp. Warm
DCB Mode O
DCB Demo O
Red 50
Green 50
Blue 50
LowBlue Mode
O / Multimedia /
Internet / Oce /
Reading
Decrease blue light wave by controlling color temperature.
Color Temp.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
sRGB Recall SRGB Color Temperature from EEPROM.
User
Red Red Gain from Digital-register
Green Green Gain Digital-register.
Blue Blue Gain from Digital-register
DCB Mode
O
Full Enhance On / O Disable or Enable Full Enhance Mode
Nature Skin On / O Disable or Enable Nature Skin Mode
Green Field On / O Disable or Enable Green Field Mode
Sky-blue On / O Disable or Enable Sky-blue Mode
Auto Detect On / O Disable or Enable AutoDetect Mode
DCB Demo On / O Disable or Enable Demo
Note:
When the HDR setting under “Image Setup” is set to “non-o” and the input source has HDR content, “Color Setup” is not adjustable.

18
Audio
Audio
Volume 50
DTS Sound Game
TruVolume HD O
200Hz 50
500Hz 50
2.5KHz 50
7KHz 50
10KHz 50
Volume 0-100 Adjust volume setting
DTS Sound Game / Rock / Classical /
Live / Theater / O
Select DTS Sound mode.
Note: It may take up to 2 seconds to switch modes.
TruVolume HD On / O Disable or Enable TruVolume HD.
200Hz 0-100 Low frequency base audio, also the root audio frequency of the chord in the tone.
500Hz 0-100 Mainly used to express vocals (eg. singing, reading), Strengthen the thickness
and strength of vocals.
2.5KHz 0-100 This frequency has a strong penetrating power and can be improved to improve
the brightness and clarity of the sound.
7KHz 0-100 Enhance the clarity of vocals.
10KHz 0-100 The high-pitched area of music is most sensitive to the high-frequency
performance of the sound.