AOK AOK-75WiP User manual

The Garden / Street Light Installation Instruction
1.The crane used to install the courtyard lamp must come with lifting platform, warning signs and flash lamp etc.
2.Electric power must be cut off before installation or maintanence of Parking Lot Light.
3.Maintenance must be performed by professional staff.
Statement
1.Electrician must have related certificates , knowledge and working experience. The work must be assigned to each
electrician based on their position and responsibility.
2.The lens of the lamp is PC + glass, which must be handled carefully during installation, otherwise will be easily
scratched and damaged. When the face of the lamp is putting on the ground, it must be protected with soft cloth or other
protective materials.
3.Installation must be proceeded when the electricity is shut off , no action taken if electricity connected.
4.Construction must be proceeded according to related regulations , including the tools and equipments used.
For example: working voltage range , Warning sign , flashing lamp , helmet , and working clothes etc.
5.Make sure the weather is suitable for high power electricity work when proceed construction.
Warning
Please read the installation manual carefully before installation and keep the manual for future use.

Step 1:
Preparation for installation of the Garden / Street Light
Product parts include introduction
1
The Courtyard Lamp
Set screws(2*M8X15)
Install the lifting bracket and fix the screw.
Elastic gasket(2)
This one rotates
2
steel wire rope
steel wire rope
Step 2:The lifting bracket is fixed on the lamp body and then hung on the wire rope.
Flat gasket(2)
The lamp body
weight:8.5kg(max)
hexagon socket head
cap screw(6*M5X15)
Set screws(2)
Elastic gasket(2)
Flat gasket(2)
hexagon socket head
cap screw(6)
The Courtyard Lamp
This one rotates
Lifting scaffold
Lifting scaffold Set screws(2)
Lifting scaffold
Set screws(2)
Lifting scaffold
fixed block(2)
This one rotates
fixed block(2)
This one rotates
fixed block(2)
The lamp body
weight:8.5kg(max)
Set screws(2)
Lifting scaffold
The lamp body
weight:8.5kg(max)
internal hexagonal wrench
The torsion: 13-17 N.m (6mm Allen wrench) internal hexagonal wrench
The torsion: 13-17 N.m (6mm Allen wrench)

3
Step 4: Wiring, connect the L,N,GND wires on the lamp to the corresponding L,N,GND cables on the conduit.
4N
L
GND
N
L
GND
Connect the wires
*AC L(Brown or Black )
*AC N(Blue or White )
*AC (Green/Yellow or G reen )
Step 3: pass the wire rope through the lifting bracket, adjust the position of the fixing block, and tighten the screws with the
hex wrench to fix the position
Set screws(2)
Lifting scaffold
steel wire rope
steel wire rope
This one rotates
fixed block(2)
The lamp body
weight:8.5kg(max)
Set screws(2)
Lifting scaffold
fixed block(2)
Position the retaining block
The lamp body
weight:8.5kg(max)
4mm Allen wrench
Set screws(2)
Lifting scaffold
steel wire rope
fixed block(2)
The lamp body
weight:8.5kg(max)
hexagon socket head
cap screw(6)