AOR SR2000 User manual

2

3

4

5

6
©

7

8
1x SR2000 main unit
1x BNC coaxial cable
1x DB9 D-type serial cable
1x DC cable
1x This handboo
1x AC power supply

9

10

11
PIN NUMBER CONNECTION
1 5V DC@30mA MAX
2 Discriminator o t, 500mVp-p
3 No connection
4 No connection
5 No connection
6 AF o t (H),120mV@600 Ohm
7 AF o t (L), 60mV@600 Ohm
8 Gro nd

12
RFU SOCKETS LOWER PANEL SOCKETS CONNECTION CABLE
IF OUT IF IN BNC coaxial cable
REMOTE RX CTR DB9 D-t pe serial cable
DC OUT DC 12V DC cable

13

14

15

16
KEYS FUNCTIONS
1～9, 0, .(period) As entered
FUNC + 1 FFT] FTT search
FUNC + 2 SRCH] search mode
FUNC + 2 press SRCH] search bank input, settings
FUNC + 3 SCAN] memory channel mode, memory scan
FUNC + 3 press SCAN] memory channel input, settings
FUNC + 4 VFO] VFO mode, VFO switch
FUNC + 5 S SCAN] select scan
FUNC + 6 S SET] select memory set
FUNC + 7 PRIO] monitoring priorities
FUNC + 7 press PRIO] monitoring priorities settings
FUNC + 8 DEL] deletion of memory channels and search banks
FUNC + 9 CONFIG] SR2000's overall configuration
FUNC + . OFFSET] monitoring offset settings
FUNC + . Press OFFSET] offset frequency settings
FUNC + 0 OBS] operation mode selection
MODE MODE] receiving mode selection
FUNC + MODE PASS] pass frequency settings
FUNC + MODE press PASS] pass frequency browser
STEP STEP] step frequency settings
FUNC + STEP SPN/STP] frequency span, frequency step settings
ATT ATT] attenuator settings
FUNC + ATT WATER] waterfall display
RBW RBS] resolution bandwidth input
FUNC + RBW OPE] calculation facility
CLR CLR] clear, back space key
FUNC + CLR A.CLR] all clear, erase a sequence
MK.F MK.F] marker selection, CF settings
FUNC + MK.F MKR] marker mode selection
kHz kHz] to validate in kHz
FUNC + kHz AMP] input sensitivity (amplitude) settings
MHz MHz] to validate in MHz, "enter" key
MHz press Input in memory channel
VOL/MUTE Select the dial as a volume knob
VOL/MUTE press Mute the sound (AF level)
FUNC + VOL/MUTE Mute the sound (AF level)
SQUELCH/MONI Select the dial as a squelch knob
SQUELCH/MONI press Open the squelch
FUNC + SQUELCH/MONI Open the squelch
FREQ./MKR Select the dial as a frequency tuning knob
FREQ./MKR press Select the dial as a marker tuning knob
FUNC + FREQ./MKR Select the dial as a marker tuning knob

17

18

19
RECEIVE MODE IF FILTER
WFM 300 KHz
NFM 15 KHz
SFM 6 KHz
AM 6 KHz

20

21