AOVX AX300 User manual

www.aovx.com
1
AOVX AX300 Quick Start
V2.1
Assets Tracker

www.aovx.com
2
Contents
Contents......................................................................................................... 2
1 Introduction............................................................................................... 3
1.1 Device overview............................................................................... 3
2 Set up your device....................................................................................4
2.1 How to insert SIM card....................................................................4
2.2 How to connect to computer.........................................................5
2.3 How to install USB driver................................................................ 5
2.4 Local configuration.......................................................................... 6
3 LED light indications................................................................................ 8
Safety Information...................................................................................... 9
History
Revision
Date
Author
Description
V1.0
2021/11/119
YUKI
Initial
V1.1
2022/01/10
YUKI
Upgrade Platform
V1.2
2022/01/25
YUKI
Upgrade LED indications
V2.0
2022/04/01
YUKI
Upgrade Layout
V2.1
2022/04/06
YUKI
Upgrade config tool

www.aovx.com
3
1 Introduction
1.1 Device overview
NOTE: Please use the USB cable provided by AOVX.
Support AM300, AL300 and AG300 series.
Figure_1 Overview of AX300

www.aovx.com
4
2 Set up your device
2.1 How to insert SIM card
1 Unscrew the screws and remove the cover;
2 Then insert the Nano SIM card;
3 Turn the internal switch to ON. Wait 2 minutes then check the LED
lights are in normal state.See LED indicators.
Figure_2 Remove the cover and insert SIM card
Figure_3 Turn the switch and check the LED indicators

www.aovx.com
5
2.2 How to connect to computer
1 Make sure the device is powered on and check the LED lights are in
normal state.See LED indicators.
2 Then connect the device to computer via USB data to serial port
cable.
2.3 How to install USB driver
1 Please download the USB-to-Serial cable driver here.
2 Install the driver according to the prompt on the screen.
3 After installation,go to Device Manager and check for the “Prolific
USB-to-Serial Com Port” device and the COM port number assigned
by Windows.
4 You are now ready to use the device on your computer.
Figure_4 Connect device via cable
Figure_5 Check COM port
AX300
COM1

www.aovx.com
6
2.4 Local configuration
All devices will have default factory settings. These settings should be
changed according to the user's needs.If you need to change the
parameters, please configure them through the latest configuration
tool.
1 Configuration process begins by connected device to computer via
cable.
Open the configuration tool;Select the corresponding COM port;
DeviceInfo is in the lower left corner of the tool, it shows the Type,
IMEI,ICCID and Version of the device.Main buttons offer following
functionality:
①Option- Language- Languages supported by the tool.
-View- Check log or tool log.
-Property- Settings of the tool.
②Tool- Protocol Analyze- Analyze JT/T808 protocol.
-Download- Loads upgrade package from file.
③About- Version-The version of the tool.
-Help- If you need more information contact us here.
④Refresh-Refresh the COM port and device information.
⑤Connect- Connect the COM port.
⑥Query- Query the device information.
⑦Set- Save configuration to device.
⑧Reset- Restart the device.
⑨Quick start- Configure Network and Report interval.
⑩Device config-configure the device information.
⑪Network config-configure band and LTE.
2 Make sure you click set after every configuration.Most important
configurator section is Quick Start – where all your server and network
can be configured.More details about A series configuration can be
found in AX300 User Manual.
Figure_6 Config tool window

www.aovx.com
7
2.5 SMS configuration
Quickly set up your device by sending SMS commands to it:
Table 1 SMS commands
commands
Examples
IP=<index>,<ip>,<port>
configure IP
APN=<apn>,<name>,<password>
configure APN
TIMEZONE=<zone>
configure timezone
TIMEGAP=<index>+<time>
configure report interval
More details about the commands in the list can be find in AOVX AT
commands.
Default configuration settings
Report Interval
Report:Report every 3600s by default.
Sample:Sampling every 3600s by default.
Device configuration
Work mode:Optional
G sensor:Range:±4G;Threshold:100; Time:3; Interval time:10 by
default.
Light:Threshold:500; Interval:10s by default.
Timezone:UTC+8 by default.
GNSS Galaxy: GPS+BD by default.
Protocol
Protocol:Type:JT808 by default; Ver:2013; Encry:NULL; Link:TCP
by default. Reportmask, Bule toothmask and sensormask are optional.

www.aovx.com
8
3 LED light indications
The three indicators are always on under the normal working state of
the device, and all three indicators are off under the sleep state.
System LED indication
Table 2 System LED
COLOR
STATE
MEANING
Red
Flash slowly
The device works normally
Flash quickly
The device works abnormally.
Off
No power or in sleep mode
Network LED indication
Table 3 Network LED
COLOR
STATE
MEANING
Green
On
Linking server succeeded
Flash
Searching for network or
linking server
Off
No power or in sleep mode
GNSS LED indication
Table 4 GNSS LED
COLOR
STATE
MEANING
Blue
On
Fix normally
Flash
Searching GNSS
Off
No power or in sleep mode

www.aovx.com
9
Safety Information
This message contains information on how to operate AX300 safely. By
following these requirements and recommendations, you will avoid
dangerous situations. You must read these instructions carefully and
follow them strictly before operating the device!
To avoid mechanical damage, it is advised to transport the device in
an impact-proof package. Before usage, the device should be placed
so that its LED indicators are visible. They show the status of device
Do not disassemble the device. If the device is damaged,
the power supply cables are not isolated or the isolation
is damaged, DO NOT touch the device before unplugging
the power supply.
All wireless data transferring devices produce interference
that may affect other devices which are placed nearby.
The programming must be performed using a PC with
autonomic power supply.
Installation and/or handling during a lightning storm is
prohibited.
The device is susceptible to water and humidity.
AOVX is not responsible for any harm caused by wrong
cables used for connection between PC and AX300
WARNING! Do not use AX300 device if it distracts driver
or causes inconvenience due to AX300 placement. Device
must not interfere with driver.
Battery should not be disposed of with general household
waste. Bring damaged or worn-out batteries to your local
recycling center or dispose them to battery recycle bin
found in stores.