Aplex ARCHMI-716(P) User manual

ARCHMI-7XX (SBC-7106A) User Manual
1
ARCHMI-7XX
(SBC-7106A)
User Manual
Release Date _ Revision
Dec. 2014 V1.1
® 2014 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: [phone] Fax: [phone] E-mail: [e-mail] URL: www.aplex.com.tw

ARCHMI-7XX (SBC-7106A) User Manual
2
Warning!_____________________________
Avertissement!________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in accordance
with local environmental regulations.
Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au rebut des piles
usagées doit resecter les réglementations locales en vigueur en matière de protection de
l'environnement.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex
Technology Inc. be liable for damages of any kind, whether incidental or consequential, arising
from either the use or misuse of information in this document or in any related materials.
Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot arrière enlevé. Des tensions
dangereuses sont élevées à l'intérieur.
Electric Shock Hazard –Do not operate the machine with its back cover removed. There are dangerous high
voltages inside.
Cet équipement génère, utilise et peut émettre une énergie de radiofréquence et s'il n'est pas installé et
utilisé conformément au manuel d'instructions, il peut provoquer des interférences dans les communications
radio. Il a été testé et approuvé conforme aux limites pour un dispositif de classe A et selon les règles de la
FCC, qui sont conçues pour fournir une protection raisonnable contre de telles interférences dans un
environnement commercial. Le fonctionnement de cet équipement dans une zone résidentielle est susceptible
de provoquer des interférences, dans ce cas l'utilisateur, à ses propres frais, devra faire le nécessaire pour
prendre toutes les mesures requises pour corriger le problème.
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions manual, it may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in which case the
user at his own expense will be required to take whatever measures may be required to correct the
interference.

ARCHMI-7XX (SBC-7106A) User Manual
3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when the card is
power-on. Always disconnect power when the system is not in use.
◆Disconnect power when you change any hardware devices. For instance, when you
connect a jumper or install any cards, a surge of power may damage the electronic
components or the whole system.
Consignes de sécurité
Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:
◆Éviter votre système contre l'électricité statique sur toutes les occasions.
◆Évitez les chocs électriques. Ne pas toucher les composants de cette carte lorsque la
carte est sous tension. Toujours débrancher lorsque le système n'est pas en cours
d'utilisation.
◆Couper l'alimentation électrique lorsque vous changez tous les périphériques matériels.
Par exemple, lorsque vous connectez un cavalier ou d'installer des cartes, une forte
augmentation de la puissance peut endommager les composants électroniques ou
l'ensemble du système.

ARCHMI-7XX (SBC-7106A) User Manual
4
Table of Contents______________________
Warning!/Avertissement!.......................................…………………………….……..….2
Caution/Precaution/Disclaimer……..……………………………………………………2
Packing List…………………………………….……………………………………………..3
Safety Precautions/Consignes de sécurité……………….……………………………..3
Chapter 1 Getting Started
1.1 Features………………………………………...…………………………..6
1.2 Specifications……………………………………………………………….6
1.3 Dimensions……………………………………………………………….…9
1.4 Brief Description of ARCHMI-7XX………………………………….…...13
1.5 Installation of HDD ………………………………...…………………..…17
Chapter 2 Hardware
2.1 Mainboard Introduction……………………...…………………………....19
2.2 Specifications………………………………………………………………19
2.3 Jumpers and Connectors Location……………………………………...22
2.4 Jumpers Setting and Connectors…………………………………..……23
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…………...…………………………52
3.2 BIOS Setup Utility………………………………………………………….52
3.3 Main Settings………………………………………………………………53
3.4 Advanced Settings………………………………………………………...54
3.5 Chipset Settings…………………………………………………………...61
3.6 Boot Settings……………………………………………………………....63
3.7 Security Settings…………………………………………………………..65
3.8 Save & Exit Settings……………………………………………………....66
Chapter 4 Installation of Drivers
4.1 Intel Chipset Driver……...………………………………………………...69
4.2 Intel Graphics Media Accelerator Driver……………………………......72
4.3 Intel (R) Network Adapter………………………………………………...75
4.4 Realtek ALC662 HD Audio Driver Installation………………………..…78

ARCHMI-7XX (SBC-7106A) User Manual
5
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/WIN7 Universal Driver Installation for
PenMount 6000 Series...……………………………………………………...80
5.1.1 Installing Software (Resistive Touch)……………………………….....80
5.1.2 Installing Software (Projected Capacitive)……………………………84
5.2 Software Functions………………………………………………………..90
5.2.1 Software Functions (Resistive Touch)…………………………………90
5.2.2 Software Functions (Projected Capacitive)…………………….…...100
Figures
Figure 1.1: Dimensions of ARCHMI-716……..…………………………........9
Figure 1.2: Dimensions of ARCHMI-717………………………………….....10
Figure 1.3: Dimensions of ARCHMI-718…………………………………….11
Figure 1.4: Dimensions of ARCHMI-721…………………………………….12
Figure 1.5: Front View of ARCHMI-716……………………………………...13
Figure 1.6: Rear View of ARCHMI-716………………………………………13
Figure 1.7: Front View of ARCHMI-717……………………………………...14
Figure 1.8: Rear View of ARCHMI-717………………………………………14
Figure 1.9: Front View of ARCHMI-718……………………………………...15
Figure 1.10: Rear View of ARCHMI-718………………………………….....15
Figure 1.11: Front View of ARCHMI-721…………………………………….16
Figure 1.12: Rear View of ARCHMI-721…………………………………….16
Figure 2.1: Mainboard Dimensions……………………………………….….21
Figure 2.2: Jumpers and Connectors Location-Board Top……………......22
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………....22

ARCHMI-7XX (SBC-7106A) User Manual
6
Chapter 1 Getting Started
1.1 Features
15.6”/17”/18.5”/21.5”Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel Atom D2550 1.86GHz CPU built-in
Onboard 4GB DDR III 800 MHz
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
ARCHMI-716(P)
ARCHMI-717(P)
ARCHMI-718(P)
ARCHMI-721(P)
System
CPU
Onboard Intel Atom Cedar View D2550 1.86GHz Dual Core Processors
Chipset
Intel NM10 Express Chipset
Memory
Onboard 4GB DDR III 800 MHz
IO Port
USB
2 x USB 2.0 type A
Serial/Parallel
1 x RS-232 DB-9
1 x DB-9 RS-232/422/485 (Default RS-232)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin power switch
Power LED Light
1 x Power LED light
Option
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via TB-528C1U2P1
2 x USB 2.0 type A + via TB-528U2
Storage Space
Storage
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
1 x SD card slot, up to 32GB
Display

ARCHMI-7XX (SBC-7106A) User Manual
7
Display Type
15.6”
17”
18.5”
21.5”
Max. Resolution
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.7M
16.7M
16.7M
16.7M
Luminance (cd/m²)
300
350
300
250
Contrast Ratio
500 : 1
1000 : 1
1000 : 1
3000 : 1
Viewing
angle(H°/V°)
160 (H) / 160 (V)
170 (H) / 160 (V)
170 (H) / 160 (V)
178 (H) / 178 (V)
Backlight
Lifetime(Hrs)
50,000 hrs
30,000 hrs
50,000 hrs
30,000 hrs
Touch Screen –Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
USB
Light
Transmission(%)
Over 80%
Touch Screen –Projected Capacitive Type
TS Control IC
Chip on tail
Interface
USB
Light
Transmission(%)
Over 90%
Power
Power Input
9~36V/DC
Mechanical
Construction
RAL 9007
IP Rating
IP65 compliant front panel
Mounting
Panel Mounting VESA 100 x 100 mm
Dimension (mm)
412 x 278 x 60.4
439 x 348 x 64.8
500 x 315 x 60
557 x 362 x 64.8
Environmental
Operating
temperature(°C)
0~50℃
Storage
temperature(°C)
-20~60℃
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
Operating System Support
OS Support
Windows 32-bit XP Pro, Windows 7 32-bit, Windows CE 6.0, Fedora 14
Note 1: ARCHMI series is covered by one or more of the following patents: US6, 570, 884,
US6,115,776, and US6,327,625.

ARCHMI-7XX (SBC-7106A) User Manual
8
** Please be notice.
Due to the limitation for Intel N2000/D2000 EMGD driver, therefore ARCHMI will have some limitation
under XP. 1. The Intel EMGD driver version is v1.15
2. It will have the unknown device under device management due to not support the
Intel HDA device (refer to the photo below)
3. It will need install the correct driver by LCD panel size/resolution, totally four
version : 800*480, 800*600, 1024*768(18bit), 1024*768(24bit)
4. The original driver not support VGA display will have to customize

ARCHMI-7XX (SBC-7106A) User Manual
9
1.3 Dimensions
Figure 1.1: Dimensions of ARCHMI-716

ARCHMI-7XX (SBC-7106A) User Manual
10
Figure 1.2: Dimensions of ARCHMI-717