AppNeta M35 User manual

AppNeta Customers Quick Reference Guide
Copyright Fuze, 2018
AppNeta Devices
Powering on M35
Powering on M50
All devices provided are Bootstrapped, which
means they are automatically connected to a
dedicated Fuze instance on the AppNeta cloud
or portal. You only need to connect the power
and network to the device and confirm from
the LED that the device is online and ready.
Note: You should then contact your Fuze
Network Consultant to activate the device,
which will assign the device into an
organization dedicated to you.
To start your M35 device:
1. Power on. Appliance is fully booted
when the status LED turns to one of
three ready states
2. Connect to network. Cable the appliance
according to the instructions in the next
section. Status LED turns to green
heartbeat when connected
To start your M50 device:
1. Power on. Appliance is fully booted
when the status LED turns to one of
three ready states
2. Connect to network. Cable the appliance
according to the instructions in the next
section. Status LED turns to green
heartbeat when connected

AppNeta Customers Quick Reference Guide
Copyright Fuze, 2018
Cabling
Cabling - Out of Band
Logging into AppNeta Performance Manager
Network connection ports on monitoring
points are used for connectivity to APM and
for delivery monitoring.
This diagram shows the network connection
port on the monitoring point connected to a
switch on your network like other LAN clients.
The network must provide connectivity to
APM.
Out-of-band Usage monitoring requires that
your switch is capable of port mirroring and
that a mirror source and a mirror destination,
also known as Switched Port Analyzer (SPAN)
ports, have been configured. The switch’s
mirror source port is the one being monitored,
typically the aggregation point.
This diagram shows how to cable a Usage
monitoring port for out-of-band Usage
monitoring.
To access the Fuze RTNM Portal you can visit
fuze.pm.appneta.com and login with the
account details you have been provided.
If you haven’t received your account details by
way of a welcome email from AppNeta, please
contact your Fuze Network Consultant.
1. Visit: fuze.pm.appneta.com
2. Enter User ID
3. Enter Password
4. Click Log in
Note: If password has been forgotten, use the
provided link