Huawei SmartAX MT880a User manual

1
SmartAX MT880a
ADSL CPE Quick Start
1 Connecting the Cables
POWER
LAN
RESET
####
#### ####
1
2
3
4
ADSL
5
1 Telephone jack on the wall 2 Splitter 3 Telephone 4 Computer 5 Power adapter

2
To connect the cables, do as follows:
Step 1 Connect the telephone jack on the wall to the LINE interface on the splitter
with a telephone line. Connect the telephone to the PHONE interface on the
splitter with a telephone line.
####
#### ####
LINE PHONE
Step 2 Connect the ADSL interface on the MT880a to the Modem interface on the
splitter with a telephone line.
####
#### ####
POWER
LAN
RESET
Modem
ADSL

3
Step 3 Connect the LAN interface on the MT880a to the Ethernet interface on the
computer with a network cable.
POWER
LAN
RESET
ADSL
Step 4 Connect the POWER interface on the MT880a to the power socket with the
power adapter.
POWER
LAN
RESET
ADSL

4
2 Getting Started
Press the power button on the top of the MT880a to power on the MT880a.
After you power on the MT880a, the ADSL indicator blinks (for less than three minutes),
which indicates that the MT880a is being activated. After the ADSL indicator stops
blinking, the POWER and ADSL indicators turn on, which indicates that the MT880a is
working properly.

5
3 Configuring the MT880a
After you enable the embedded dial-up function of the MT880a, when
the MT880a is not used for the network access, power off the MT880a.
Otherwise, even if you have shut down your computer, the network
operator may still charge you for the network access.
Step 1 Log in to the Web configuration page.
1. Launch the Internet Explorer on the computer. Enter http://192.168.1.1 in
the address bar and press Enter.
2. In the displayed dialog box, enter the user name and the password, and then
click OK.
By default, both the user name and the password are admin. After the password is
verified, you can access the Web configuration page.
Step 2 Enable the embedded dial-up function.
1. In the navigation tree on the left of the Web Configurator, choose Basic >
WAN Setting.
2. Select a PVC number, such as 1, from the PVC drop-down combo box.
3. Enter the VPI and VCI parameters that are provided by the network operator
in the VPI and VCI text boxes.
4. Select Yes from the Active drop-down combo box and select Routing from
the Mode drop-down combo box.
5. Enter the user name and password that are provided by the network
operator in the Username and Password text boxes , keep the default settings
of other parameters.
6. Click Submit to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer only once. The next time
when you power on the computer, you can surf the Internet without performing any
configuration.
4 Indicators
Indicator Status Description
On The MT880a is powered on.POWER
Off The MT880a is powered off.

6
Indicator Status Description
Blinking The MT880a is being activated.
On The MT880a is activated.
ADSL
Off The MT880a is powered off.
Blinking Data is being transmitted through the Ethernet
interface.
On The Ethernet connection is established.
LAN
Off The Ethernet connection is not established.
Copyright © Huawei Technologies Co., Ltd. 2009. All
rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co.,
Ltd.
All other trademarks and trade names mentioned in this document are the property of
their respective holders.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.
Issue: 02 (2009-01-04)
Part Number: 102090