APRIL X STONE AP301-PT10 User manual
3
PHONE TOASTER User Manual
2
Mobile Phone Wireless ChargingⅠSterilizer
Features
Mobile Phone Sterilization by UV-C LED6 UV-C LEDs are placed 360˚ to kill 99.9% of toxic bacteria from the mobile phone in
5 minutes. UV-C LED with strong sterilizing power destroys the DNA of bacteria and
viruses, and neutralizing them. PHONE TOASTER is designed in a closed structure
that blocks UV-C LED, it is safe because the LED will not operate if the phone slot is
not closed.
Mobile Phone Wired/Wireless Fast ChargingAt the same time as UV sterilization, the phone charges wirelessly at high speed.
Mobile phone sterilization and charging proceed at the same time, so it prevents
bacteria and saves time. Also, an USB charging terminal is mounted, it allows fast
charging of the mobile phone via wire. It allows charging multiple mobile phones
quickly at the same time with wired/wireless fast charging.
High Quality Bluetooth SpeakerEquipped with the latest version of Bluetooth 5.1 chipset, stable data transmission
with low power is possible with smart devices. With an output of 8W rated, various
contents are reproduced more realistically. Enjoy high quality audio by connecting
wirelessly to smart devices such as smartphones, tablets and laptops.
Analog Alarm ClockThe current time and alarm can be easily set using the dial, and the time can be
viewed even in dark places with the light switch.
Table of Contents
Precautions for Safety 4
Product Composition and Specifications 5
Product Composition -----------------------------------------------------------------5
Product Specifications----------------------------------------------------------------5
Part Names and Functions 6
Front Side---------------------------------------------------------------------------------6
Top/Left/Back Sides -------------------------------------------------------------------7
Sterilization/Wireless Charging 8
Checking the operation status -----------------------------------------------------9
Using the Bluetooth Speaker 10
Using the Alarm Clock 10
Setting the time/alarm ------------------------------------------------------------- 10
Turn on the clock light -------------------------------------------------------------- 10
Wired Charging of Mobile Phone 10
Troubleshooting 11
54
Mobile Phone Wireless ChargingⅠSterilizer PHONE TOASTER User Manual
Product Composition and Specifications
Please check the components and specifications before using the product, and use it correctly.
Product Composition
PHONE TOASTER Power Adapter User Manual
Product Specifications
Product Name PHONE TOASTER
Model Name AP301-PT10
Sterilization Method 6 UV-C LEDs (Max. 20,000 hours of use)
Input Power DC 12 V, 2 A (Max. 30 W)
Temperature
Operation -10 ℃~ 50 ℃Storage -40 ℃~ 85 ℃Size (WxHxD) 232 mm x 154 mm x 110 mm
Weight PHONE TOASTER : 1180 g ±20 g
Maximum Size of Mobile Phone 80.8 mm x 172.3 mm x 11.9 mm
Wireless Charging 9 V, 1.7 A, 15 W, Fast Charging
Frequency: 125 KHz
USB Charging USB-A Type, 9 V, 1.7 A, 18 W, Fast Charging
Bluetooth Speaker 8 W/4 Ω, 5.0VER BDR, EDR
Frequency: 2.4 GHz
Precautions for Safety
This is to keep the user safe and prevent pr operty damage. Please read carefully before using the
product and use it correctly.
Warning Failure to observe the warnings may result in death or serious injury.
Do not look directly at the UV-C LED or let UV rays hit your skin.
■Direct contact with the light from the UV-C LED may be harmful to the human body.
Do not touch the product or power adapter in operation with wet hands.
■Electric shock may result.
Do not allow electro-conductive materials (i.e. metal, liquid, etc.) to come into contact with the power
adapter or USB connection terminal.
■A fire may result from corrosion of the connection terminal or a temporary short circuit.
Do not place the product in a high temperature environment, or near heat sources, heating cookware,
or high pressure containers.
■It may cause heat or fire in the product.
Be careful not to let children or pets suck or bite the product.
■There is a risk of suffocation due to damage on the product or small parts.
Do not disassemble, repair, or modify at your discretion.
■There is a risk of product failure or electric shock.
Caution Failure to observe the precautions may result in personal injury or property damage.
Do not drop the product or give strong impact to it.
■The product may be damaged.
Do not apply excessive force to the sterilization/charging lever.
■The product may be damaged.
Do not force your phone into the slot.
■The product and mobile phone may be damaged.
Remove accessories such as thick cases and straps from the phone and insert it.
■The product may not operate normally.
Do not insert anything other than mobile phones into the product.
■The product may malfunction.
Do not use the product for any purpose other than its intended use.
■The product may malfunction.
Be careful when cleaning the product.
■Be sure to disconnect the power adapter before cleaning the product.
■Do not put the product into water.
■Do not use thinner, alcohol or cleaning spray.
■When cleaning the product’s connection terminal, wipe it with a cotton swab or soft cloth.
76
Mobile Phone Wireless ChargingⅠSterilizer PHONE TOASTER User Manual
Top/Left/Back Sides
1
2
3
45
6
Number Name Functions
1
Mobile Phone Slot Insert the phone for sterilization/wireless charging.
2
Alarm Stop Button Turn off the alarm sound.
3
Sterilization/Charging
Lever
Start or stop sterilization and wireless charging of the
phone.
4
Power Button Turn the product on or off.
5
USB Charging Terminal Connect the USB-A cable to charge the phone.
6
Power Adapter
Connection Terminal
Connect the power adapter to supply power to the
product.
Part Names and Functions
Front Side
1 2 3 4
5
7
6
8
Number Name Functions
1
Speaker Output the sound from a device connected via
Bluetooth.
2
Volume Control Bar Adjust the volume of the Bluetooth speaker.
3
Timer Setting Bar Set the sterilization/charging time.
4
Status Light
Indicate Bluetooth, sterilization and wireless charging
status.
■: Indicate Bluetooth pairing
■: Indicate Sterilization
■: Indicate Wireless charging
5
Clock Light Switch Turn the clock’s light on or off.
6
Bluetooth Connection
Switch Turn the Bluetooth connection on or off.
7
Alarm Setting Dial Set the alarm time.
8
Time Setting Dial Set the current time.
98
Mobile Phone Wireless ChargingⅠSterilizer PHONE TOASTER User Manual
3
Slowly lower the Sterilization/Charging Lever until a ‘click’sound is
heard to fix it.
■The mobile phone slot is closed, and then it starts to sterilize and charge wirelessly.
4
To stop during operation, press the Sterilization/Charging Lever
again until a ‘click’sound is heard.
■The Sterilization/Charging Lever is raised and the operation stops.
■When the Sterilization/Charging Lever is down, the time does not change even if the
Timer Setting Bar is adjusted.
■The product does not operate when the mobile phone slot is open, and it stops if the
mobile phone slot is opened during operation.
Checking the operation status
It is possible to check the operation status through the LED indicator on the front of the
product.
(Sterilization) LED (Wireless Charging) LED
■Standby for sterilization: LED off
■During sterilization: LED on (15 minutes)
■Sterilization completed: LED off
■Operation error: LED blinks (quickly)
■Standby for charging: LED off
■While charging: LED on
■Charging completed: LED on
■Operation error: LED blinks (quickly)
Sterilization/Wireless Charging
This product is a mobile phone sterilizer using UV-C LED. Not only sterilize the phone, but also
wirelessly charge it at the same time.
Check Before Use
■Make sure if the product is powered.
■Make sure if the Sterilization/Charging Lever is raised all the way.
■Make sure if the inside of the product is empty.
1
Place the mobile phone horizontally in the slot with its front facing
forward.
2
Use the Timer Setting Bar to set the sterilization/wireless charging
time.
■It is set to quick mode when the Timer Setting Bar is lowered to the bottom, and sterilization
proceeds for 5 minutes in quick mode.
■Sterilization proceeds for 15 minutes in normal mode.
■When the timer ends, the mobile phone comes up with the Sterilization/Charging Lever.
1110
Mobile Phone Wireless ChargingⅠSterilizer PHONE TOASTER User Manual
Troubleshooting
Problems Confirmation and Measures
It does not operate at all. Make sure if the power is properly connected.
The power is on, but the
sterilization indicator does not
light up.
Make sure if the mobile phone slot on the top of the
product is closed well.
The mobile phone does not
come out.
Remove the power and remove the mobile phone
manually with the slot opened.
The sterilization indicator is
turned off after 15 minutes.
This product is sterilized for up to 15 minutes. If further
sterilization is required, operate it again.
The charging indicator is off.
■For mobile phones with wireless charging function,
make sure if the phone is placed in the center of the
slot with the phone facing the front.
■Remove the mobile phone case and insert it into the
slot.
The foreign substance on
the mobile phone has not
disappeared.
This product operates only the sterilization function and
does not support the cleaning function.
Using the Bluetooth Speaker
1
Turn on the Bluetooth Connection Switch.
■In the pairing standby status, the (Bluetooth) LED blinks slowly.
2
Select ‘PHONE TOASTER’on the device to be connected.
■When pairing is complete, the (Bluetooth) LED on with a beep sound.
■After initial connection, turn on the Bluetooth Connection Switch to automatically
connect with the last paired device.
■It is possible to connect to other devices via Bluetooth only when there is no device
connected to the product or the Bluetooth connection is disconnected.
■When a Bluetooth device is already connected, pairing detection is not possible.
Using the Alarm Clock
Setting the time/alarm
Use the Time/Alarm Setting Dial to set the current time and alarm.
■When the power is cut off, the clock stops after running for a certain period of time, so you need to set
the time again.
■If an alarm is set, it is possible to turn it off by pressing the Stop Alarm button. (The alarm does not
sound when the button is being pressed.)
Turn on the clock light
If the surrounding is dark, it is possible to use the Clock Light Switch to turn on the clock.
Wired Charging of Mobile Phone
Check before use
Make sure if the product is powered.
Connect the mobile phone to the USB Charging Terminal on the back of the product using
a standard USB cable.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this
device that are not expressly approved by the manufacturer
may void the user's authority to operate the equipment.
FCC Part 15.105
Note : This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
Modifications not expressly approved by the manufacturer
could void your authority to operate the equipment under
FCC rules.
RF Radiation Exposure Statement :
This equipment complies with FCC RF Radiation exposure
limits set forth for an uncontrolled environment. This device
and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
■Name of Company : SK Networks Co., Ltd.
■Manufacturer / Country : Devatec Co., Ltd. / Korea
■Product Name : PHONE TOASTER
Table of contents
