APRILIA DORSODURO 1200 ABS - ATC Guide

SERVICE STATION MANUAL
897263
DORSODURO 1200 ABS - ATC
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

SERVICE STATION
MANUAL
DORSODURO 1200 ABS - ATC
THE VALUE OF SERVICE
Due to the continuous technical updates and specific mechanic training programs for Aprilia products,
only Aprilia Official Network mechanics know this vehicle fully and have the special tools necessary to
carry out maintenance and repair operations correctly.
The reliability of the vehicle also depends on its mechanical state. Checking the vehicle before riding, its
regular maintenance and using only Original Aprilia Spare Parts are essential!
For information about the nearest Official Dealer and/or Service Centre, consult the Yellow Pages or
search directly from the map on our Official Website:
www.aprilia.com
Only by requesting aprilia Original Spare Parts can you be sure of purchasing products that were
developed and tested together with the actual vehicle itself. All Aprilia Original Spare Parts undergo
quality control procedures to guarantee reliability and durability.
The descriptions and illustrations given in this publication are not binding; While the basic characteristics
as described and illustrated in this booklet remain unchanged, Aprilia reserves the right, at any time and
without being required to update this publication beforehand, to make any changes to components, parts
or accessories, which it considers necessary to improve the product or which are required for
manufacturing or construction reasons.
Not all versions/models shown in this publication are available in all Countries. The availability of
individual versions/models should be confirmed with the official Aprilia sales network.
© Copyright 2010 Aprilia. All rights reserved. Reproduction of this publication in whole or in part is
prohibited. Aprilia - After-sales service.
Aprilia trademark is property of Piaggio & C. S.p.A.
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

SERVICE STATION MANUAL
DORSODURO 1200 ABS - ATC
This manual provides the main information to carry out regular maintenance operations on your vehicle.
This manual is intended to Aprilia Dealers and their qualified mechanics; several concepts have been
deliberately omitted as they are considered unnecessary. As it is not possible to include complete
mechanical notions in this manual, users should have basic mechanical knowledge or minimum
knowledge about the procedures involved when repairing scooters. Without this knowledge, repairing or
checking the vehicle may be inefficient or even dangerous. As the vehicle repair and check procedures
are not described in detail, be extremely cautious so as not to damage components or injure individuals.
In order to optimise customer satisfaction when using our vehicles, aprilia s.p.a. commits itself to
continually improve its products and the relative documentation. The main technical modifications and
changes in repair procedures are communicated to all aprilia Sales Outlets and its International
Subsidiaries.Thesechangeswillbeintroducedinthesubsequenteditionsofthemanual.Incaseofneed
or further queries on repair and check procedures, consult aprilia CUSTOMER DEPARTMENT, which
will be prepared to provide any information on the subject and any further communications on updates
and technical changes related to the vehicle.
NOTE Provides key information to make the procedure easier to understand and carry out.
CAUTION Refers to specific procedures to carry out for preventing damages to the vehicle.
WARNING Refers to specific procedures to carry out to prevent injuries to the repairer.
Personal safety Failure to completely observe these instructions will result in serious risk of personal
injury.
Safeguarding the environment Sectionsmarked with this symbol indicate the correct use of thevehicle
to prevent damaging the environment.
Vehicle intactness The incomplete or non-observance of these regulations leads to the risk of serious
damage to the vehicle and sometimes even the invalidity of the guarantee.
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

INDEX OF TOPICS
CHARACTERISTICS CHAR
SPECIAL TOOLS S-TOOLS
MAINTENANCE MAIN
TROUBLESHOOTING TROUBL
ELECTRICAL SYSTEM ELE SYS
ENGINE FROM VEHICLE ENG VE
ENGINE ENG
POWER SUPPLY P SUPP
SUSPENSIONS SUSP
CHASSIS CHAS
BRAKING SYSTEM BRAK SYS
CLUTCH SYSTEM CLU SYS
COOLING SYSTEM COOL SYS
BODYWORK BODYW
PRE-DELIVERY PRE DE
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

INDEX OF TOPICS
CHARACTERISTICS CHAR
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Rules
Safety rules
Carbon monoxide
If you need to keep the engine running while working on the vehicle, please ensure that you do so in
an open or very well ventilated area. Never let the engine run in an enclosed area. If you do work in an
enclosed area, make sure to use a fume extraction system.
CAUTION
EXHAUSTEMISSIONSCONTAINCARBONMONOXIDE,APOISONOUSGASWHICHCANCAUSE
LOSS OF CONSCIOUSNESS AND EVEN DEATH.
Fuel
CAUTION
FUEL USED TO POWER INTERNAL COMBUSTION ENGINES IS HIGHLY FLAMMABLE AND CAN
BECOME EXPLOSIVE UNDER SPECIFIC CONDITIONS. IT IS THEREFORE RECOMMENDED TO
CARRY OUT REFUELLING AND MAINTENANCE PROCEDURES IN A VENTILATED AREA WITH
THE ENGINE SWITCHED OFF. DO NOT SMOKE DURING REFUELLING AND NEAR FUEL VA-
POURS, AVOID ANY CONTACT WITH NAKED FLAMES, SPARKS OR OTHER SOURCES WHICH
MAY CAUSE THEM TO IGNITE OR EXPLODE.
DO NOT DISPERSE FUEL IN THE ENVIRONMENT.
KEEP OUT OF THE REACH OF CHILDREN.
Hot components
The engine and the exhaust system components become very hot and remain hot for some time after
the engine has been switched off. Before handling these components, make sure that you are wearing
insulating gloves or wait until the engine and the exhaust system have cooled down.
Coolant
The coolant contains ethylene glycol which, under certain conditions, can become flammable.
When it burns, ethylene glycol produces an invisible flame which however can cause burns.
CAUTION
TAKE CARE NOT TO SPILL COOLANT ONTO HOT ENGINE OR EXHAUST SYSTEM COMPO-
NENTS; THE FLUID MAY IGNITE AND BURN WITH AN INVISIBLE FLAME. WHEN CARRYING
OUT MAINTENANCE, IT IS ADVISABLE TO WEAR LATEX GLOVES. EVEN THOUGH IT IS TOXIC,
COOLANT HAS A SWEET FLAVOUR WHICH MAKES IT VERY ATTRACTIVE TO ANIMALS. NEV-
ER LEAVE THE COOLANT IN OPEN CONTAINERS IN AREAS ACCESSIBLE TO ANIMALS AS
THEY MAY DRINK IT.
Characteristics DORSODURO 1200 ABS - ATC
CHAR - 8
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

KEEP OUT OF THE REACH OF CHILDREN.
DO NOT REMOVE THE RADIATOR CAP WHEN THE ENGINE IS STILL HOT. THE COOLANT IS
PRESSURISED AND MAY CAUSE SCALDING.
Used engine oil and transmission oil
CAUTION
IT IS ADVISABLE TO WEAR LATEX GLOVES WHEN SERVICING THE VEHICLE.
THE ENGINE OR GEARBOX OIL MAY CAUSE SERIOUS INJURIES TO THE SKIN IF HANDLED
FOR PROLONGED PERIODS OF TIME AND ON A REGULAR BASIS.
WASH YOUR HANDS CAREFULLY AFTER HANDLING OIL.
HAND THE OIL OVER TO OR HAVE IT COLLECTED BY THE NEAREST USED OIL RECYCLING
COMPANY OR THE SUPPLIER.
DO NOT DISPOSE OF OIL IN THE ENVIRONMENT
KEEP OUT OF THE REACH OF CHILDREN.
Brake and clutch fluid
BRAKE AND CLUTCH FLUIDS CAN DAMAGE THE PLASTIC OR RUBBER PAINTED SURFACES.
WHEN SERVICING THE BRAKING OR THE CLUTCH SYSTEM PROTECT THESE COMPONENTS
WITH A CLEAN CLOTH. ALWAYS WEAR PROTECTIVE GOGGLES WHEN SERVICING THESE
SYSTEMS. BRAKE AND CLUTCH FLUIDS ARE EXTREMELY HARMFUL FOR YOUR EYES. IN
THE EVENT OF ACCIDENTAL CONTACT WITH THE EYES, RINSE THEM IMMEDIATELY WITH
PLENTY OF COLD, CLEAN WATER AND SEEK MEDICAL ADVICE.
KEEP OUT OF THE REACH OF CHILDREN.
Battery electrolyte and hydrogen gas
CAUTION
THE BATTERY ELECTROLYTE IS TOXIC, CORROSIVE AND, AS IT CONTAINS SULPHURIC
ACID, MAY CAUSE BURNING IF IT COMES INTO CONTACT WITH THE SKIN. WHEN HANDLING
BATTERY ELECTROLYTE, WEAR TIGHT-FITTING GLOVES AND PROTECTIVE APPAREL. IN
THE EVENT OF SKIN CONTACT WITH THE ELECTROLYTIC FLUID, RINSE WELL WITH PLENTY
OF CLEAN WATER. IT IS PARTICULARLY IMPORTANT TO PROTECT YOUR EYES BECAUSE
EVEN TINY AMOUNTS OF BATTERY ACID MAY CAUSE BLINDNESS. IN THE EVENT OF CON-
TACT WITH THE EYES, RINSE WITH PLENTY OF WATER FOR FIFTEEN MINUTES AND CON-
SULT AN EYE SPECIALIST IMMEDIATELY. IF THE FLUID IS ACCIDENTALLY SWALLOWED,
DRINK LARGE QUANTITIES OF WATER OR MILK, FOLLOWED BY MILK OF MAGNESIA OR
VEGETABLE OIL AND SEEK MEDICAL ADVICE IMMEDIATELY. THE BATTERY RELEASES EX-
PLOSIVE GASES; KEEP IT AWAY FROM FLAMES, SPARKS, CIGARETTES OR ANY OTHER
HEAT SOURCES. ENSURE ADEQUATE VENTILATION WHEN SERVICING OR RECHARGING
THE BATTERY.
KEEP OUT OF THE REACH OF CHILDREN.
BATTERY LIQUID IS CORROSIVE. DO NOT POUR IT OR SPILL IT, PARTICULARLY ON PLASTIC
COMPONENTS. ENSURE THAT THE ELECTROLYTIC ACID IS COMPATIBLE WITH THE BAT-
TERY BEING ACTIVATED.
Maintenance rules
GENERAL PRECAUTIONS AND INFORMATION
DORSODURO 1200 ABS - ATC Characteristics
CHAR - 9
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

When repairing, disassembling and reassembling the vehicle, strictly follow the recommendations re-
ported below.
BEFORE DISASSEMBLING COMPONENTS
•Beforedismantling components, remove dirt, mud, dust and foreign bodies from the vehicle.
Use the special tools designed for this bike, as required.
COMPONENTS REMOVAL
•Donot loosen and/or tighten screws and nuts using pliers orany other tools than the specific
wrench.
•Mark the positions on all connection joints (pipes, cables, etc.) before separating them, and
identify them with different distinctive symbols.
•Each component needs to be clearly marked to enable identification during reassembly.
•Clean and wash the dismantled components carefully using a low-flammability detergent.
•Keep mated parts together since they have "adjusted" to each other due to normal wear.
•Some components must be used together or replaced altogether.
•Keep away from heat sources.
REASSEMBLING COMPONENTS
CAUTION
BEARINGS MUST ROTATE FREELY, WITHOUT JAMMING AND/OR NOISE, OTHERWISE, THEY
NEED TO BE REPLACED.
•Only use ORIGINAL Aprilia SPARE PARTS.
•Comply with lubricant and consumables use guidelines.
•Lubricate parts (whenever possible) before reassembling them.
•Whentightening nuts andscrews, start eitherfromthe components withthe largest diameter
or from the innermost components, proceeding diagonally. Tighten nuts and screws in suc-
cessive steps before applying the tightening torque.
•Always replace self-locking nuts, washers, sealing rings, circlips, O-rings (OR), cotter pins
and screws with new parts if the thread is damaged.
•When assembling the bearings, make sure to lubricate them well.
•Check that each component is assembled correctly.
•After a repair or routine maintenance, carry out pre-ride checks and test the vehicle on
private grounds or in an area with low traffic.
•Clean all mating surfaces, oil seal rims and gaskets before refitting. Smear a thin layer of
lithium-based grease on the oil seal rims. Reassemble oil seals and bearings with the brand
or batch number facing outward (visible side).
ELECTRIC CONNECTORS
Electric connectors must be disconnected as described below; failure to comply with this procedure
causes irreparable damage to both the connector and the wiring harness:
Press the relative safety clips, if applicable.
Characteristics DORSODURO 1200 ABS - ATC
CHAR - 10
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

•Grip the two connectors and disconnect them by pulling them in opposite directions.
•If any signs of dirt, rust, moisture, etc. are noted, clean the inside of the connector carefully
with a jet of compressed air.
•Ensure that the cables are correctly fastened to the internal connector terminals.
•Then connect the two connectors, ensuring that they couple correctly (if fitted with clips, you
will hear them "click" into place).
CAUTION
DO NOT DISCONNECT CONNECTORS BY PULLING THE CABLES.
NOTE
THE TWO CONNECTORS CAN ONLY BE CONNECTED IN ONE DIRECTION: CONNECT THEM
THE RIGHT WAY ROUND.
TIGHTENING TORQUES
CAUTION
REMEMBERTHATTHETIGHTENING TORQUES FORALLFASTENINGELEMENTS ON WHEELS,
BRAKES, WHEEL AXLES AND ANY OTHER SUSPENSION COMPONENTS PLAY A KEY ROLE
IN ENSURING VEHICLE SAFETY AND MUST COMPLY WITH SPECIFIED VALUES. CHECK THE
TIGHTENING TORQUES OF FASTENING ELEMENTS ON A REGULAR BASIS AND ALWAYS USE
A TORQUE WRENCH TO REASSEMBLE THESE COMPONENTS. FAILURE TO COMPLY WITH
THESE RECOMMENDATIONS MAY CAUSE ONE OF THESE COMPONENTS TO LOOSEN OR
EVEN DETACH, CAUSING A WHEEL TO LOCK OR COMPROMISING VEHICLE HANDLING. THIS
MAY LEAD TO FALLS, WITH THE RISK OF SERIOUS INJURY OR DEATH.
Running-in
Engine run-in is essential to ensure engine long life and correct operation. Twisty roads and gradients
areideal torun-in engine,brakes andsuspensionseffectively.Varyyour ridingspeed duringtherunning
in period. In this way, you allow for the work of components to be "loaded" and then "unloaded", thus
cooling engine parts.
CAUTION
ONLY AFTER THE SERVICE AT THE END OF THE RUN-IN PERIOD CAN THE BEST PERFORM-
ANCE OF YOUR VEHICLE BE OBTAINED.
Follow the guidelines detailed below:
•Do not fully open the throttle grip abruptly at low engine speeds, either during or after the
running in period.
•During the first 100 Km (62 miles) use the brakes gently, avoiding sudden or prolonged
braking. That is to permit the adequate adjustment of the pad friction material to the brake
discs.
AFTER THE SPECIFIED MILEAGE, TAKE YOUR VEHICLE TO AN Official aprilia Dealer FOR THE
CHECKS INDICATED IN THE "AFTER-RUN-IN" TABLE IN THE SCHEDULED MAINTENANCE
SECTION, TO AVOID INJURING YOURSELF, OTHERS AND/OR DAMAGING THE VEHICLE.
DORSODURO 1200 ABS - ATC Characteristics
CHAR - 11
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Vehicle identification
Write down the chassis and engine number in the specific space in this booklet. The chassis number
is handy when purchasing spare parts.
CAUTION
THE MODIFICATION OF THE IDENTIFICATION CODES IS A SERIOUS PUNISHABLE CRIME.
HOWEVER, THE LIMITED WARRANTY FOR NEW VEHICLES WILL BE VOID IF THE VEHICLE
IDENTIFICATION NUMBER (VIN) HAS BEEN MODIFIED OR NOT PROMPTLY DETERMINED.
This number consists of numbers and letters, as in the example shown below.
ZD4TVA000YSXXXXXX
KEY:
ZD4: WMI (World manufacturer identifier) code;
TV: model;
A00: version variation;
0: free digit
Y: year of manufacture
S: production plant (S= Scorzè);
XXXXXX: serial number (6 digits);
ENGINE NUMBER
The engine number is printed on the base of the
engine crankcase, left hand side.
Engine No. ....................
CHASSIS NUMBER
The chassis number is stamped on the right hand side of the headstock.
Chassis No. ....................
Dimensions and mass
DIMENSIONS
Specification Desc./Quantity
Max. length 2248 mm (88.19 in)
Max. width (at hand guards) 925 mm (36.42 in)
Max. height 1205 mm (47.44 in)
Saddle height 870 mm (34.25 in)
Wheelbase 1528 mm (60.16 in)
Kerb weight 223 kg (492 lb)
Dry weight (unfuelled) 212 kg (467 lb)
Characteristics DORSODURO 1200 ABS - ATC
CHAR - 12
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Engine
ENGINE
Specification Desc./Quantity
Model M555M
Type 90° longitudinal V-twin, 4-stroke, 4 valves per cylinder, 2 over-
head camshafts.
No. of cylinders 2
Total engine capacity 1197 cm³ (73.05 cu.in)
Bore / stroke 106 x 67.8 mm (4.17 x 2.67 in)
Valve clearance at intake 0.15 - 0.20 mm (0.0059 - 0.0079 in)
Outlet valve clearance 0.20 - 0.25 mm (0.0079 - 0.0098 in)
Compression ratio 12.0 : 1
Ignition starter
Engine idle speed 1400 ± 100 rpm
Clutch Multiple-disk, oil-bathed clutch with control on the left side of
the handlebar
Lubrication system Wet crankcase. Pressure system regulated by a trochoidal
pump with oil radiator.
Air filter Sponge.
Cooling Fluid
GEARBOX
Specification Desc./Quantity
Type Mechanical, 6 speeds with foot lever on the left hand side of
the engine
Transmission
GEAR RATIOS
Specification Desc./Quantity
Gear ratio Gear primary drive 40/69
1st gear ratio 14/36 (secondary)
2nd gear ratio 17/32 (secondary)
3rd gear ratio 20/30 (secondary)
4th gear ratio 22/28 (secondary)
5th gear ratio 23/26 (secondary)
6th gear ratio 24/25 (secondary)
Final drive gear ratio 16/40
Capacities
CAPACITY
Specification Desc./Quantity
Fuel tank (reserve included) 15 l (3.30 UK gal; 3.96 USgal)
Fuel reserve 2.5 l (0.55 UK gal; 0.66 US gal)
Engine oil 3.1 l (without oil filter change) (0.68 UK gal; 0.82 USgal)
3.35 l (with oil filter change) (0.74 UKgal; 0.88 USgal)
Coolant 2.5 l (0.55 UK gal; 0.66 USgal)
Seats 2
Maximum weight limit 416 kg (917 lb)
DORSODURO 1200 ABS - ATC Characteristics
CHAR - 13
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Drive chain
DRIVE CHAIN
Specification Desc./Quantity
Type Endless (without master link) and with sealed links. No. of links
108
Model 525 ZRPK
Electrical system
ELECTRICAL SYSTEM
Specification Desc./Quantity
Battery 12 V - 12 Ah YTX 14 - BS
Main fuses 30A
Auxiliary fuses 7.5 A; 10 A; 15 A
ABS - ATC fuses (if fitted) 20 A
Alternator (permanent magnet type) 13.5 V - 450 W at 6000 rpm
SPARK PLUGS
Specification Desc./Quantity
Standard spark plugs NGK CR8EKB
Alternative spark plugs, for sports use or for prolonged high
speed cruising fully loaded NGK CR9EKB
Spark plug electrode gap 0.6 - 0.7 mm (0.024 - 0.028 in)
Resistance 5 kOhm
WARNING LIGHTS
Specification Desc./Quantity
High beam light LED
Right turn indicator LED
Left turn indicator LED
General warning LED
Gear in neutral LED
Side stand down LED
Fuel reserve LED
ABS LED
BULBS
Specification Desc./Quantity
High beam light 12 V - 60 W H4
Low beam light 12 V - 50 W H4
Front daylight running light 12V - 6W H6
Turn indicator light 12V - 10W
Rear daylight running light / stop light LED
License plate light 12V - 5W
Rpm indicator lighting LED
Multifunction display lighting LED
Frame and suspensions
CHASSIS
Specification Desc./Quantity
Type Component chassis (bolted). Die-cast aluminium plates and
high-strength steel tubular chassis.
Steering inclination angle 27.3°
Trail 118 mm (4.65 in)
Characteristics DORSODURO 1200 ABS - ATC
CHAR - 14
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

SUSPENSION
Specification Desc./Quantity
Front Sachs upside-down stanchions with adjustable hydraulic
damping and 43mm (1.69 in) diameter stanchions
Travel 160 mm (6.3 in)
Rear Oscillating swingarm with Sachs piggy-back single shock ab-
sorber and adjustable spring preloading, wheelbase and hy-
draulic compression and rebound damping.
Wheel travel 155 mm (6.1 in)
SIZES A AND B
Specification Desc./Quantity
Size A 693.1 mm (27.29 in)
Size B 369.8 mm (14.56 in)
Brakes
BRAKES
Specification Desc./Quantity
Front Double floating disc, Ø 320 mm (12.60 in), radially-mounted
calliper with four Ø 32 mm (1.26 in) pistons and two calliper
pads
Rear 240 mm (9.45 in) diam. disc brake with 34 mm (1.34 in) diam.
single piston calliper
Wheels and tyres
WHEEL RIMS
Specification Desc./Quantity
Type Light alloy rims with extractable bolt
Front 3.50 x 17"
Rear 6.00 x 17"
TYRES
Specification Desc./Quantity
Tyre type (standard) PIRELLI CORSA III
DUNLOP SPORTMAX QUALIFIER
Front tyre 120/70 ZR17" (58W)
Front tyre pressure rider only: 2.3 bar (230 kPa) (33.36 PSI)
rider + passenger: 2.4 bar (240 kPa) (34.81 PSI)
Rear tyre 180/55 ZR17" (73W)
Rear tyre pressure rider only: 2.5 bar (250 kPa) (36.26 PSI)
rider + passenger: 2.7 bar (270 kPa) (39.16 PSI)
DORSODURO 1200 ABS - ATC Characteristics
CHAR - 15
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

Supply
FUEL SYSTEM
Specification Desc./Quantity
Type Electronic injection (Multipoint)
Throttle valve diameter Ø 57 mm (2.44 in)
Fuel Premium unleaded petrol, minimum octane rating of 95
(NORM) and 85 (NOMM)
Tightening Torques
Chassis
Front side
COOLING SYSTEM
pos. Description Type Quantity Torque Notes
1 Electric fan fastener screw M4x45 6 3 Nm (2.21 lbf ft) -
2 Flanged TE screw fastening left Ra-
diator to trellis M6x25 1 10 Nm (7.37 lbf ft) -
3 Flanged TE screw fastening expan-
sion tank M6x20 1 10 Nm (7.37 lbf ft) -
Characteristics DORSODURO 1200 ABS - ATC
CHAR - 16
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

OIL COOLING RADIATOR
pos. Description Type Quantity Torque Notes
1 TEFL screw fastening oil radiator M6x25 1 10 Nm (7.37 lbf ft) -
2 TEFL screw fastening oil radiator
mounting M6x12 1 10 Nm (7.37 lbf ft) -
DORSODURO 1200 ABS - ATC Characteristics
CHAR - 17
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

FRONT FORK
pos. Description Type Quantity Torque Notes
1TEFL screw (fasten onto Fork Hubs) M6x40 4 10 Nm (7.37 lbf ft) -
2 Screw (Pumping member pin fixing
to the stem base) - 2 30 Nm (22.13 lbf ft) -
3 Upper cover - 2 20 Nm (14.75 lbf ft) -
4 Upper cover locking nut - 2 20 Nm (14.75 lbf ft) -
STEERING
pos. Description Type Quantity Torque Notes
1 Headstock ring nut - pre-tightening M25x1 1 60 Nm (44.25 lbf ft) Unscrew after pre-
tightening
1 Headstock ring nut - tightening M25x1 1 50 Nm (36.88 lbf ft) -
2 Headstock cap M22x1 1 100 Nm (73.75 lbf ft) -
3 TCEI screw fastening fork legs to
bottom yoke M8x35 4 25 Nm (18.44 lbf ft) -
4 TCEI screw fastening U-bolt onto
fork yoke M10x60 2 50 Nm (36.88 lbf ft) -
5TCEI screw fastening fork legs to top
yoke M8x30 2 25 Nm (18.44 lbf ft) -
6 Headstock counter-lock ring M25x1 1 - Tighten by hand
Characteristics DORSODURO 1200 ABS - ATC
CHAR - 18
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]

INSTRUMENT PANEL
pos. Description Type Quantity Torque Notes
1 TCEI screw fastening instrument
panel mounting to fork yoke M6x20 2 10 Nm (7.37 lbf ft) -
2 Screw fixing instrument panel to
plate 5x14 3 2.6 Nm (1.92 lbf ft) -
DORSODURO 1200 ABS - ATC Characteristics
CHAR - 19
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]