APTO PJ Production & Hans Thyge & Co 6000-0039 User manual

INSTRUCTION MANUAL
TABLE SHELF - BAMBOO
DESIGNED BY PJ PRODUCTION & HANS THYGE & CO
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©

INSTRUCTION MANUAL
PARTS
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
TABLE SHELF - BAMBOO
Bamboo with Scandinavian Matte Black tube: 6000-0039
1 x tube
1 x bamboo table tray
1 x mount
5 x self-tapping screws
1 x socket screw

INSTRUCTION MANUAL
WHAT YOU WILL NEED
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
1 x MULTI CLAMP
Nordic Dark Blue: 6000-0000-5008
Danish Dusty Green: 6000-0000-7033
Scandinavian Matte Black: 6000-0000-9000
1 x ALLEN WRENCH
The Allen wrench is included in the multi
clamp box
1 x SCREWDRIVER
One screwdriver. Please note that this is not
included!

INSTRUCTION MANUAL
STEP 1
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Start by aligning the mount and the reserved side of the table shelf top before continuing. Now connect the mount and bamboo
table shelf with the five included self-tapping screws. When these are connected, carefully insert the tip of the screwdriver into the
hexogon cross section of the self-tapping screw and turn the screwdriver in a clockwise fashion until the screw has been sufficiently
tightened. Repeat the process with the remaining four self-tapping screws.

INSTRUCTION MANUAL
STEP 2
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Now carefully connect the mount and the tube manually by hands in a clockwise fashion until the tube has been
sufficiently tightened.

INSTRUCTION MANUAL
STEP 3
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Carefully lead the socket screw through the hole in order to fastened and stabilize the bamboo table shelf

INSTRUCTION MANUAL
STEP 4
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Carefully lead the tube through the hole at the top of the multi clamp

INSTRUCTION MANUAL
STEP 5
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
The finger screw must be open entirely before continuing. Now carefully insert the tip of the Allen wrench into the hexagon cross
section of the socket screw and turn the wrench in a clockwise fashion until the socket screw has been sufficiently tightened.

INSTRUCTION MANUAL
STEP 6
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
The table shelf can now be attached to the prefered surface.

INSTRUCTION MANUAL
STEP 7
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
When the placement of the table shelf is correctly, then tighten the finger screw completely.

DANISH DESIGN
Copyright ©
Hårup Skovvej 2, 8600 Silkeborg, Danmark
+ 45 86 81 23 75 // www.aptocollection.dk