APTO ROUND TABLE 280 mm User manual

INSTRUCTION MANUAL
ROUND TABLE - Ø280 MM & 380 MM
DESIGNED BY PJ PRODUCTION & HANS THYGE & CO
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©

INSTRUCTION MANUAL
PARTS
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
This instruction manual is equal for following: round table - Ø280 mm and round table - Ø380 mm. The different parts for the par-
ticular item numbers are illuminated below. Note: the instruction manual is made with the large version measuring Ø380 mm.
ROUND TABLE - Ø280 MM
Nordic Dark Blue: 6000-0014-5008
Danish Dusty Green: 6000-0014-7033
Scandinavian Matte Black: 6000-0014-9000
ROUND TABLE - Ø380 MM
Nordic Dark Blue: 6000-0018-5008
Danish Dusty Green: 6000-0018-7033
Scandinavian Matte Black: 6000-0018-9000
1 x Ø280 mm table top 1 x Ø380 mm table top
1 x tube 1 x tube
1 x socket screw 1 x socket screw

INSTRUCTION MANUAL
WHAT YOU WILL NEED
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
1 x MULTI CLAMP
Nordic Dark Blue: 6000-0000-5008
Danish Dusty Green: 6000-0000-7033
Scandinavian Matte Black: 6000-0000-9000
1 x ALLEN WRENCH
The Allen wrench is included in the multi clamp box

INSTRUCTION MANUAL
STEP 1
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Carefully connect the table top and the tube manually by hands in a clockwise fashion until the tube has been
sufficiently tightened.

INSTRUCTION MANUAL
STEP 2
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Carefully lead the socket screw through the hole in order to fastened and stabilize the round table.

INSTRUCTION MANUAL
STEP 3
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
Carefully lead the tube through the hole at the top of the multi clamp

INSTRUCTION MANUAL
STEP 4
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
The finger screw must be open entirely before continuing. Now carefully insert the tip of the Allen wrench into the hexagon cross
section of the socket screw and turn the wrench in a clockwise fashion until the socket screw has been sufficiently tightened.

INSTRUCTION MANUAL
STEP 5
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
The round table can now be attached to the prefered surface.

INSTRUCTION MANUAL
STEP 6
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
When the placement of the round table is correctly, then tighten the finger screw completely.

DANISH DESIGN
Copyright ©
Hårup Skovvej 2, 8600 Silkeborg, Danmark
+ 45 86 81 23 75 // www.aptocollection.dk