APURO GF256-A User manual

Waffle Maker
Instruction manual
Model:
GF256-A

Safety Tips
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• DO NOT immerse the appliance in water.
• Always use the black handles to lift the plates.
• Some surfaces become hot during operation - take care when using the appliance.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
• If the power cord is damaged, it must be replaced by a Apuro agent or a recommended qualified
technician in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
Product Description
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your Apuro product.
Pack Contents
The following is included:
Apuro prides itself on quality and service, ensuring that at the time of packaging the contents are supplied
fully functional and free of damage.
Should you find any damage as a result of transit, please contact your Apuro dealer immediately.
•GF256-A - Waffle Maker
• Apuro Waffle Makerl
•WasteTray
• Instruction Manual

Telephone Helpline:130 0225960
Operation
Seasoning the Cooking Surfaces
The cooking plate surfaces need to be 'seasoned' before using for the first time.
1. Ensure the cooking surfaces are clean.
2. Brush the surfaces with cooking oil.
3. Set the thermostat(s) to 110°C and turn the appliance On. The power indicator light turns on.
4. Once the appliance reaches temperature the power indicator light turns off.
5. Turn the appliance Off and allow the to cool before wiping away any excess oil.
6. The appliance is now ready to use.
Cooking
1. Close the plates.
2. Set the thermostat(s) to the desired temperature (60°C-300°C) and turn the appliance On. The power
indicator light(s) turn on.
3. The power indicator light(s) turn Off when the appliance has reached the set temperature.
4. Lift the top plate and place the waffle mix on the bottom plate.
5. Lower the top plate.
Note: It may be necessary to slightly grease the plates with cooking oil before cooking
depending on the foodstuff.
Note:185°C is suitable for general waffle cooking.

Using the Timer
The digital timer with audible alarm can be set from 1 second to 15 minutes
START/STOP: Press START/STOP to start timer, press again to stop. The timer will provide an audible
alarm after the set time. The alarm will beep 10 times and the display will continue to flash until timer is
reset (press the START/STOP button)
UP: Press UP to add extra time
DOWN: Press DOWN to reduce time
PROGRAM:There are a total of 6 programmable timer settings. The default factory program settings are
given below
To change the length of a program select the program you want to change by scrolling using the
PROGRAM button. Adjust the program time by using the UP and DOWN buttons. Press START/STOP
to commence the count down. The new program time will be automatically stored
The timer provides an audible alarm after the set time expires. It provides no electrical
control over the unit
If the unit is left without power for more than 24hrs the timer settings will revert to the
factory defaults

Telephone Helpline:130 0225960
Cleaning, Care & Maintenance
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely
difficult to remove. To prevent this follow the cleaning steps below:
• Always turn Off the appliance and disconnect from the power supply before cleaning.
• Allow the appliance to cool before cleaning but for best results clean the plates when they are still
slightly warm.
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
• Take care when using scrapers to remove cooking residues as they can damage the cooking surface.
•Drythoroughlyafter cleaning.
• A Apuro dealer or qualified technician should carry out repairs if required.
.
Waste Tray
These appliances feature a waste tray to collect any liquid or fats that run off during cooking.
At least once a day, remove and empty the waste tray before washing with warm soapy water. Do not allow
the tray to overfill or excess grease will run out of the overflow hole at the front of the tray.
NOTE: IT IS VITAL THAT THE COOKING SURFACE IS RE-SEASONED AFTER SCOURING.
WARNING: DO NOT USE STEEL WOOL AS IT MAY LEAVE SHARDS THAT COULD
CONTAMINATE FOOD.
WARNING: DO NOT remove the tray during or immeadiately after use as the contents
will be hot.

Telephone Helpline:130 0225960
Troubleshooting
If your Apuro appliance develops a fault, please check the following table before making a call to the
Helpline.
Technical Specifications
Electrical Wiring
This appliance is supplied with , moulded plug and lead, as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
Fault Probable Cause Action
The unit is not working The unit is not switched
on
Check the unit is plugged in correctly and
switched on
Plug and lead are
damaged
Call Apuro agent or qualified technician
Fuse in the plug has
blown
Replace the plug fuse
Power supply Check power supply
Internal wiring fault Call Apuro agent or qualified technician
Appliance does not reach set
temperature
Faulty thermostat Call Apuro agent or qualified technician
Faulty element Call Apuro agent or qualified technician
Appliance heats up but
indicator light does not come on
Bulb has expired Call Apuro agent or qualified technician
Power indicator light comes on
but appliance does not heat up
Faulty element Call Apuro agent or qualified technician
Faulty thermostat Call Apuro agent or qualified technician
Thermostat set
incorrectly
Check thermostat
Appliance slow to heat up Cooking surface not
clean
Clean cooking surface
Faulty element Call Apuro agent or qualified technician
Model Voltage Power Current Dimensions
h x w x d (mm)
Weight
(kg)
GF256 230V 50Hz 2000W 8.7A 305 x 410 x 230 19.3

Telephone Helpline:130 0225960
Compliance
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.
Apuro parts have undergone strict product testing in order to comply with regulatory
standards and specifications set by international, independent, and federal
authorities.
Apuro products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of Apuro.
Every effort is made to ensure all details are correct at the time of going to press, however, Apuro reserve the right to change
specifications without notice.

DECLARATION OF CONFORMITY
I, the undersigned, hereby declare that the equipment specified above conforms to the
above Legislation and Standard(s).
Equipment Type Waffle Maker
Model GF256-A
Legislation C-Tick
AS/NZ 3820 Essential Safety Requirements
for Low Voltage Electrical Equipment
Standards EN 55014-1:2006+A1: 2009+A2: 2001
EN 61000-3-2: 2006+A1:2009+A2:2009
EN 61000-3-3:2008
EN 55014-2: 1997+A1: 2001+A2: 2008
IEC 60335-2-38:2002+A1:2008
IEC 60335-1:2001+A1:2004+A2:2006
Producer Name Apuro
Producer
Address
15 Badgally Road,
Campbelltown,
NSW 2560
Date 03/09/14
Signature
Full Name Richard Cromwell
Position Commercial Director

NOTES

NOTES