Aqua Training Bag APSENSOR01 User manual

App & Sensor
Instructions

Battery Door
Green O-Ring
Tube
Tube End Fitting
Power & Connection
Indicator Light
Metal Ball
The Aqua Training Bag® Sensor

QUICK START GUIDE STEP 1
Install Sensor in Aqua Training Bag®.
INSTALL VIDEO
*Phillips head screwdriver required.
**Water level must not be above fill port.
***Shrink wrap prevents damage to hardware for initial install.
Check water level**
Place tube into opening***
Remove plug*
Hand tighten sensor

QUICK START GUIDE STEP 2
Install 2 AAA batteries into Sensor.
Insert two AAA batteries
Remove screw*
Press blue button to open
Slide top back into place
and replace screw
*Phillips head screwdriver required.
Remove shrink wrap

QUICK START GUIDE STEP 3
Download Aqua Bag App and register.
Scan QR code
to download
our App
The Apple logo is a trademark
of Apple Inc., registered in
the U.S. and other countries.
The Google Play logo is a
trademark of Google LLC,
registered in the U.S. and
other countries.
Bluetooth is a trademark of Bluetooth SIG, INC.,
registered in the U.S. and other countries.

QUICK START GUIDE STEP 4
Link App to Sensor and workout!
Tap Profile icon on bottom
right, then tap Device Manager
Tap blue Connect button and
choose bag size
A red Disconnect button and steady green light on the Sensor
indicate you are properly connected

TROUBLESHOOTING
1. Allow the App to access your location when
prompted. Not doing so will cause the App to
function incorrectly.
2. If having trouble pairing the Sensor to the App,
verify Bluetooth is enabled on your device. If still
having problems, log out of the App, close it and
retry.
3. Do not overfill the bag with water. Doing so will
cause the punch force to be wrong. When the bag is
hanging, water should be filled to the bottom of the
fill port.
4. The Sensor goes to sleep after about 5 minutes of
inactivity. If you are having trouble connecting, be
sure your Sensor is awake. Do this by hitting the bag
with at least 30 pounds of force. If the green light is
on, the Sensor is awake.
5. If more troubleshooting is necessary, please read the
full instructions on the following pages. You can also
visit Aquatrainingbag.com/sensor-app/FAQ/ or call
our Customer Service Team at 888-858-2782.

FULL INSTRUCTION GUIDE
STEP 1
Remove the standard plug from a properly-hung and
filled Aqua Training Bag®.
STEP 2
Carefully insert the sensor’s tube into the bag, being
cautious not to damage the metal ball on the end, which
is imperative to proper operation of the sensor.
Your new sensor will arrive sealed with shrink wrap.
The recommendation is to leave the shrink wrap on the
sensor to protect it from water intrusion when inserting
the sensor for the first time.

The sensor needs to be tight enough that no air is
leaking around the threads, but caution should be used,
as over-tightening the sensor could damage it.
STEP 3
Make sure the green O-ring is seated against the
threads. Thread the sensor into the bag’s plug opening,
stopping when it’s firmly hand-tightened.

The light on your sensor should now be blinking green,
indicating it has power. Once you successfully pair your
device to the sensor this light will change to a
steady green.
STEP 4
Remove the sensor’s battery door by removing the
screw and depressing the push button. Insert two AAA
batteries. Then replace the battery door and screw.

STEP 5
Download the Aqua Training Bag® App in the App Store
or Google Play by searching for “Aqua Bag” or by using
your device to scan the QR code on the right.

STEP 6
Open the Aqua Training Bag® App and tap “Sign Up”
to start the registration process. Your tablet or phone
will need Wi-Fi or cellular data access to the web for
the registration process. Allow the App to access your
location when prompted. Not doing so will cause the
App to not function.

STEP 7
Complete the sign-up form. Tap “NEXT”. A 6-digit
verification code will be sent via email. Enter this code
and tap verify.

STEP 8
Complete the Profile Questions.
STEP 9
Congratulations! You have completed the registration
process. The App’s main dashboard will now appear.

STEP 10
Tap “Profile” at the bottom right corner of the screen.
STEP 11
Tap “Device Manager”.

STEP 12
Tap the blue “connect” button next to the sensor name.
If multiple sensors are being displayed, make sure you
select the correct serial number. Select the correct size
bag you are using (15", 18", or 21") and tap OK.
If you are unsure of your sensor’s name, it is located on the
underside of your sensor, as well as the bottom of the box it came in.

STEP 13
Once the App is properly connected to the sensor, a red
“disconnect” button will appear. Once this “disconnect”
button appears, you have properly paired the App and
Sensor. Additionally, the indicator light on your sensor
should have changed from blinking to a steady green.
STEP 14
Tap the “back” button at the top left corner of
the screen.

STEP 15
Tap the “Session” button at the bottom left corner of
the screen.
STEP 16
Tap the green “Start” button to start exercising.

STEP 17
Select the length of each round (1, 2, 3, or 5 minutes)
and the number of rounds (1-12) and click save.
STEP 18
A 30-second timer will start, counting down before the
round starts. You can skip the countdown by tapping
“Start” immediately.

STEP 19
During each individual round the App will instantly
refresh showing the power of the last strike, number of
power punches, and frequency of punching across the
three large circles in the center of the screen.