aquabrass Tubo 12014 User manual

Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
aquabrass.com
last revision: 06/11/2020
1
Installation Guide
Guide d’installation

aquabrass.com
last revision: 06/11/2020
Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
2
Service parts / Schéma des pièces
Item Code English Français
1ABAE51998 Aerator Aérateur
2ABCA66099 Cartridge Cartouche
3ABFC20173 Handle Poignée
4ABFC41120 Handle base Base pour poignée
5ABFP12067 Large nut Ecrou large
Item Code English Français
6ABFC14674 Dome cap Capuchon en dôme
7ABFP41021 Tie down kit Ensemble d’attache
8ABFH12023 Hot water flexible hose Flexible d’eau chaude
9ABFH12024 Cold water flexible hose Flexible d’eau froide
1
2
3
5
6
7
89
4

Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
aquabrass.com
last revision: 06/11/2020
3
General dimensions / Dimensions générales
CAUTION: FOR BEST RESULTS, WE STRONGLY RECOMMEND THE INSTALLATION OFTHIS FAUCET BE DONE
BY A LICENSED PLUMBER.
MISE EN GARDE: POUR OBTENIR UN RÉSULTAT OPTIMAL, NOUS RECOMMANDONS FORTEMENT QUE
L’INSTALLATION DE CE ROBINET SOIT FAITE PAR UN PLOMBIER ACCRÉDITÉ.
CAUTION: MAKE SURE TO PROPERLY FLUSH THE HOT AND COLD WATER SUPPLY. FAILURE TO CARRY
OUT THIS SIMPLE PROCEDURE COULD CAUSE PROBLEMS OR DAMAGE TO THE WORKING OF THE FAU-
CET.
MISE EN GARDE: ASSUREZ-VOUS DE BIEN PURGER L’ALIMENTATION D’EAU CHAUDE & FROIDE. NE PAS
FAIRE CETTE ÉTAPE POURRAIT CRÉER DES PROBLÈMES OU DOMMAGES POUR LE FONCTIONNEMENT
DU ROBINET.
[205.00] 8 1/16”
[165.00] 6 1/2”
[135.00]
5 5/16”
[50.00]
2”
[195.00]
7 11/16”

aquabrass.com
last revision: 06/11/2020
Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
4
1
34
2
1Prepare the faucet
Préparation du robinet 2Install the faucet
Installation du robinet
Fig.1 Fig.2
2
1
Drain installation
Installation du drain
Fig.3
WE RECOMMEND DRILLING A
1-3/8” DIAMETER HOLE.
NOUS RECOMMANDONS DE
PERÇER UN TROU DE 1 3/8” DE
DIAMÈTRE.
Place the rubber ring (1) against the fau-
cet body and insert the faucet (2) into
the hole of the basin or countertop as
shown (Fig. 1).
Places la bague en caoutchouc (1)
contre le bec. Insérer le robinet (2) dans
le trou du lavabo ou du comptoir tel
qu’illustré (Fig. 1).
Insert the tie down kit (1) to the rod.
Secure the faucet with the metal nut (2).
Connect the hot and cold hoses (3&4) to
the water supply.
Insérer l’ensemble de montage (1) sur
le manchon fileté. Fixer le robinet avec
l’écrou métallique (2). Connecter les
tuyaux d’eau chaude et froide (3&4) à
l’alimentation d’eau.
1
2
5
4
3
Unscrew the tube (2) and remove the
hexagonal nut (3), the white nylon washer
(4) and the black rubber washer (5).
Insert the body of the drain (1) into the
hole of the basin.Reinsert the washers
and the hexagonal nut in the same order;
(5), (4), (3).Tighten firmly without putting
pressure on the basin.Screw back the
tube (2). It is recommended to apply
teflon tape around the tube’s thread to
prevent water leaks.
Dévisser le tube (2) et enlever l’écrou
hexagonal (3), la rondelle de nylon
blanche (4) et la rondelle de caoutchouc
noire (5).Insérer le corps du drain (1) dans
le trou du lavabo.Remettre les rondelles
et l’écrou dans le même ordre; (5), (4), (3).
Resserrer fermement sans exercer de
pression surle lavabo.Revisser le tube (2).
Il est recommandé d’appliquer du ruban
de teflon autour des fillets afin de
prévenir les fuites.

Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
aquabrass.com
last revision: 06/11/2020
5
Fig.4
Cartridge replacement
Remplacement de la cartouche
5
4
1
3
2
Fig.5
Start by shutting off water supply lines
and then turn on the faucet to drain.
To replace the cartridge (5), remove the
set screw (1), take out the handle (2) and
dome cap (3). Unscrew large nut (4). Re-
place the cartridge (5) with the new one
and reassemble by reversing steps.
Couper l’alimentation d’eau et ouvrir le
robinet pour vider l’eau résiduelle.
Pour remplacer la cartouche (5),
Enlever la vis de réglage (1), et retirer la
poignée (2) et le dôme décoratif (3). Dé-
visser l’ecrou (4). Remplacer la
cartouche (5) et remonter en inversant
les étapes.
Cleaning the aerator
Nettoyage de l’aérateur
To clean the aerator, remove it (1) from
the spout with the key supplied (2).
Then soak it in a vinegar and water
solution to remove lime build-up. Once
parts have been cleaned, reinsert the
aerator.
Pour nettoyer l’aérateur (1), dévisser le
avec la clé fournie (2). Ensuite, tremper
l’aérateur dans un mélange de
vinaigre et d’eau, pour retirer le
calcaire qui pourrait s’y être accumulé.
Une fois les pièces nettoyées, replacer
l’aérateur.
1
2

aquabrass.com
last revision: 06/11/2020
Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
6
Aquabrass offers a lifetime warranty against defects in materials and workmanship under normal conditions of use, care and maintenance of the
product(s), for as long as the original purchaser owns their home. The warranty applies only when the product is purchased from an authorized
Aquabrass dealer. It is not transferable and is limited to products sold and installed in Canada and the United States.
OUR WARRANTIES FOR RESIDENTIAL APPLICATIONS
• Limited lifetime warranty for ceramic disc cartridges.
• Five (5) year warranty for all other cartridges (thermostatic cartridges, diverters, check stop mechanisms etc.).
• Limited lifetime warranty for the polished chrome, electro black, stainless steel and PVD finishes.
• Three (3) year warranty for all other finishes.
• Two (2) year warranty for electronic faucets and components (batteries are not covered by our warranty).
• Five (5) year warranty for all other Aquabrass product(s) and parts.
OUR WARRANTY FOR COMMERCIAL / INDUSTRIAL APPLICATIONS
• All Aquabrass products and parts will be warranted for two (2) years.
OUR WARRANTY ON FINISHES
Polished chrome, electro black, stainless steel and PVD finishes carry a limited lifetime warranty against defects. All other Aquabrass finishes are
warranted for three (3) years. Finishes on drains are not covered by the warranty, nor the normal wear of any finish. Normal wear and tear is the
expected decline in the condition of a product/finish due to normal everyday use. We highly recommend you carefully read the care and mainte-
nance detailed instructions or visit our website aquabrass.com/aquabrass finishes.
OUR COMMITMENT
We will repair or replace, free of charge, during the applicable warranty periods listed above, any product, part or finish that is proven
defective in material and/or workmanship under normal installation, condition of use, care and maintenance of the product(s). Replacement parts
for discontinued products will be made available, under warranty or not, until stock lasts. Under the period(s) of the warranty listed above, if the
required replacement product, part or finish is no longer available, an equivalence will be recommended and provided, free of charge.
OUR WARRANTY EXCLUSIONS
• Damage caused by inadequate installation, misuse, lack of care and maintenance of the product(s).
• Surface damage caused from using abrasive products, such as detergents.
• Corrosion resulting from exposition to chemically reactive products, such as Chlorine.
• Damage caused by hard water, calcareous deposits or sediments.
• Damage or loss occurred by a natural calamity such as fire, earthquake, flood, thunder, electrical storm.
• The installation of any Aquabrass products by a non-accredited professional.
•
Any labor or shipping charges, or damages whatsoever incurred in whole or in part from installation, removal, re-installation, repair or
replacement of any Aquabrass product or part, as well as any incidental or consequential damages, expenses, losses, direct or indirect, arising
from any cause whatsoever.
OUR WARRANTY CLAIM PROCESS
To exercise our warranty, a proof of purchase – such as a copy of invoice - must be made available to our distribution center. Depending on the
complexity of the defective product, an inspection can be required prior to approving the warranty claim.
North American Distribution Center (Canada & USA):
AD-WATERS
Technical Service Center
9805 Clark street
Montréal, Québec H3L 2R5
1 888 239-9336
[e-mail]
For international requests: [e-mail]
Aquabrass reserves the right to make product specification changes without notice or obligation and to change or discontinue certains models
WARRANTY

Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
aquabrass.com
last revision: 06/11/2020
7
CARE & MAINTENANCE
Do not allow water residues to come into prolonged contact with the surface finish. After each use, gently dry the product surface with
a clean soft cloth to prevent water-spotting and mineral build-up. Water stains and accumulation of minerals weaken the protective
coating, eventually leading to peel off.
Clean the surface regularly using a pH neutral clear liquid soap, water and a soft cloth. Rinse away any traces of soap and gently
dry with a soft clean cloth. Occasional application of Flitz Faucet Wax Plus is also recommended. The application of this wax based
product leaves a protective layer that repels water, thereby providing extra protection against tarnishing.
Avoid abrasive and harsh cleaning products (detergents, caustic, acidic, antibacterial, ammonia- or bleach-containing products, or-
ganic solvents, lime scale and clog removers, brass and silver cleaners, etc.). The use of these products can damage the finish and will
void the warranty. We recommend covering the fixture with a towel when using any of the listed products in order to prevent damage
by splashing.
Residues left by personal products such as soap, toothpaste and shampoo can damage the finish. Always rinse these residues away
with clean water and wipe dry.
Due to the characteristics of the Aquabrass custom finishes and their appropriate maintenance durability dependency, the
warranty for custom finish products is three (3) years. There are no returns on custom finish products.
OPTIONAL LOW FLOW AERATORS
Adjustments for specific restrictions can be made on most of our lavatory bathroom faucets in order to coordinate with
regional flow rate allowances. A low flow restrictor is sold at $10 per unit. Please contact your local Aquabrass representative for
additional details.
PRODUCT CERTIFICATION
Complying with North American plumbing standards and guaranteeing environmental products of the highest quality is our top priority.
ABOUT

aquabrass.com
last revision: 06/11/2020
Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
8

Tubo 12014
single-hole lavatory faucet
robinet de lavabo monotrou
aquabrass.com
last revision: 06/11/2020
9