How to connect two PRISM II. (Optional)
How to install the Hanging Kits. (Optional)
How to install the Bracket. (Standard)
How to install the Pro Stand. (Optional)
21
21
0
20
40
60
80
100
00am 06am 12pm 03pm 07pm
SunriseDawn Midday Sunset Dusk Night
0%
@ 6:00AM
Channel A
1%
@ 8:00 AM
75%
@ 12:00 PM
75%
@ 5:00 PM
1%
@ 8:00 PM
0%
@ 10:00 PM
Channel B
0%
@ 6:00AM
1%
@ 7:00 AM
75%
@ 12:00 PM
75%
@ 5:00 PM
1%
@ 8:00 PM
0%
@ 10:00 PM
0%
@ 6:00AM
1%
@ 8:00 AM
75%
@ 12:00 PM
75%
@ 5:00 PM
1%
@ 8:00 PM
0%
@ 10:00 PM
Channel D
0%
@ 6:00AM
1%
@ 8:00 AM
75%
@ 12:00 PM
75%
@ 5:00 PM
1%
@ 8:00 PM
0%
@ 10:00 PM
Channel C
Default Settings
There are 7 presents available to quickly setup your light. You may customize up to 3 presets with
your own custom settings.
Channels A, B, CandD have 6 time points and the intensity can be adjusted for each channel.
Note: If you select “ALL”, then all the channels will be overwritten with the new settings.
DEMO: The DEMO mode will run the current light settings in a 1 minute demonstration.
Save Settings: You can save your current settings to any of the 3 customized presets.
The Manual Mode will allow you to set the intensity from 1 to 100% for all or each individual channels.
Smart Controller Menu Overview
Quick Set
Auto Mode
Manual Mode
Clock
System Lock
Signal Channel
INPUT
DC12~36V
Antenna
2.4G
Output
LED
Output
Expand
ExpandMode
IMOS 4.0 Smart Controller
Special Function 1: Press and hold “OK” for 3 seconds, while the unit is locked,
to toggle between Auto & Manual Mode.
Special Function 2: Press and hold “BACK” for 3 seconds to unlock or lock the controller.
Special Function 3: Press and hold “OK” + “BACK” together to change the Receiver Mode.
Note: “A” = Auto Mode, “M” = Manual Mode, “A:100%” = Intensity for each Channels
“ ” = Locked, “ ” = Unlocked, “ ” = Expand ON, “ ” = Channel Signal.
Intensity
AM 11：22 A
A:100% B:100%
BACKOK
1
1
Quick Set
Auto Mode
Manual Mode
Broadcaster
Settings
Receiver
Expand
SPS - 20K
LPS - 15K
Mixed Reef
Green Planted
Red Planted
Mixed Planted
Refugium
DIY 1
CH-A CH-B
CH-C ALL
A:100% B:100%
C:100%
ALL
Demo
Save Settings
Dawn 08:00 AM
Intensity 000%
Sunrise 10:00 AM
Intensity 080%
Midday 12:00 PM
Intensity 100%
Sunset 03:00 PM
Intensity 100%
Dark 06:00 PM
Intensity 080%
Night 08:00 PM
Intensity 000%
The smart controller gradually ramps the light intensity between the set points
The graph below outlines how the LEDs will ramp up and down between the settings.
24 Hours Lighting Cycle Overview
The Expand option (Plug icon) adds more flexibility to adapt with additional devices such as pumps,
fans, valves etc..
The timers in the expand mode can turn ON/OFF, adjust the power to the speed of the fan, the
intensity for the lights or power for the valve.
Broadcaster (Parent): When linking multiple units, assign one controller as the Broadcaster which
will become the primary unit.
Signal: Select a channel. Up to 9 channels can be selected and paired with multiple units to the
same channel number
Note: Enabling the Broadcaster will display the channel signal number on the home screen.
Receiver (Child): Switch controller to receiver mode to set additional units that will connect to the
primary Broadcaster unit.
Signal: The controller’s home screen will only show the “Receiver” and the paired channel number.
Set Clock: Set the controller to your local time
Languages: Two languages are available in “English” or “Chinese”
24 HOUR: You can toggle between 24 HOUR or AM/PM mode
Factory Reset: Reset all settings to factory default settings.
Linkage Mode (Broadcaster - Receiver)
Expand
Settings
00am 05am 09am 12pm 03pm 08pm
12am
Sunrise
Dawn
Midday
Sunset
Dusk
Night Night
Pairing Mode
Pairing...
Receiver
Pairied CH 1
YES
Pairing
Signal
Receiver Pairing...
CH 1
Broadcaster
Receiver
Broadcaster
AM 11：22 A
A:100% B:100%
1
Enable YES Start Time 08:00 AM
End Time 08:00 PM
Power 100%
Set Clock
Languages
24 HOUR
Factory Reset
Note: The 2.4G antenna signal covers up to 16 square feet (5 square meters) and may not be able to penetrate walls.
