Aquatic Fundamentals Arch Metal Aquarium Stand 10 Product information sheet

Arch Metal Aquarium Stand - 10 / 10-20 / 20-29
EASY ASSEMBLY INSTR CTIONS AND PARTS LIST
THANK YOU FOR PURCHASING THIS
QUALITY PIECE OF FURNITURE.
MARCO GROUP, INC. IS
DEDICATED TO PROVIDING A
QUALITY PRODUCT AND WILL MAKE
EVERY ATTEMPT TO DELIVER
CUSTOMER SATISFACTION.
BEFORE BEGINNING ASSEMBLY:
PLEASE REVIEW THE PARTS LIST TO
ENSURE THAT YOU HAVE ALL THE
PARTS. IF YOU HAVE MISSING OR
DAMAGED PARTS, OR ARE IN NEED OF
ASSEMBLY GUIDANCE, CALL
1-888-6 7- 601
OR VISIT OUR WEBSITE.
PLEASE, DO NOT RETURN THIS
MERCHANDISE TO THE STORE.
IMPORTANT SAFETY INFORMATION
Please read all he following informa ion before assembling and
using your aquarium s and.
THIS PRODUCT IS NOT A TOY. NEVER allow small children to
touch, climb on or play with the aquarium or the aquarium stand.
Serious injury or death could result.
WHERE TO PLACE YOUR AQUARIUM
Use only an aquarium s and designed o suppor he weigh and size of your
aquarium. The filled weigh of an aquarium is approxima ely 10 o 12 pounds
per gallon. This s and is designed only for use on level surfaces. Failure o
place your s and on a level surface could cause he aquarium o leak, crack
or even ip and fall. Never ip he s and from i s uprigh posi ion.
MOVING YOUR AQUARIUM STAND
Always posi ion he s and in he desired loca ion before pu ing he aquarium
ank in place. Never a emp o move he s and wi h he aquarium in place.
Never remove an aquarium ank from he s and unless he aquarium ank is
comple ely emp y. Never carry he s and by i s op.
ASSEMBLY & CARE
Assemble furni ure on he car on or carpe o pro ec he finish.
Clean furni ure wi h a sof clo h mois ened wi h wa er.
DO NOT use abrasive cleaners.
DO NOT leave wa er on any of he s and’s surfaces. Always wipe spilled wa er from he s and.
Wa er, for prolonged periods, could damage he s and’s surface.
Aqua ic Fundamen als
5400 Doniphan Drive
Neosho, MO 64850
E-Mail us a : info@aqua icfundamen als.com
Visi our Websi e:
www.aqua icfundamen als.com
LIMITED WARRANTY
This aquarium s and is under warran y from Marco Group, Inc. agains defec s in ma erial and workmanship for 90 days from he da e of purchase. If any componen of he s and
is found o be defec ive, you may con ac us for replacemen provided he s and has no been modified, damaged or misused. Proof of purchase mus be provided.
THIS WARRANTY IS VOID if he aquarium s and is modified, if i is no placed on a fla , level surface, if i is used wi h a ank o her han i is designed, if i is moved wi h he ank
in place or if i is used for o her han i s in ended purpose.
This warran y is limi ed o replacemen of he s and only. The warran y DOES NOT cover loss of fish, personal injury, proper y loss or damage arising ou of use of he aquarium
s and. Some s a es do no allow he exclusion or limi a ion of inciden al or consequen ial damages, so he above limi a ion or exclusion may no apply o you. This warran y
gives you specific legal righ s and you may have o her righ s ha vary from s a e o s a e.
85210 Rev A 4/07

10 10-20 20-29
Gallon Gallon Gallon
Note Square hole
on this end
Top arch can be easily identified
by the square hole located in one
end. It is also longer than the
bottom arch.
Tools Needed:
1 - 10mm box wrench
PN 85210 PAGE 2
REV: A 4/2007
# of Pieces
Missing a Part? - Visit us online at www.aquaticfundamentals.com

To assist during the assembly process, we have included profiles of the arch assembly for each size of stand.
Use the notes and hints below to aid during assembly.
The top arch supports will be longer than the bottom arch supports.
The top arch will have a square hole where it attaches to the other arch supports.
After the arch is bolted together in the center, you can gently adjust by hand the bend angles on the lower portion
as needed for assembly.
Do not tighten nuts securely until all assembly steps have been completed.
PN 85210 PAGE 3
REV: A 4/2007 Missing a Part? - Visit us online at www.aquaticfundamentals.com
10 Gallon Stand 10-20 Gallon Stand 20-29 Gallon Stand

Hint: Use the longest screw in the hardware bag for this step!
PN 85210 PAGE 4
REV: A 4/2007 Missing a Part? - Visit us online at www.aquaticfundamentals.com
Figure 1
Figure 2

If the holes do not line up, remove the lock washer and nut. Then repeat step '6' using the other end of the
bottom arch support. It may be necessary to slightly adjust the bend angle by hand to complete the assembly.
Figure 3 Figure 4
Hint: Use the shortest screw in the hardware bag for step 6!
PN 85210 PAGE 5
REV: A 4/2007 Missing a Part? - Visit us online at www.aquaticfundamentals.com