Aquatic RIVIERA MOTIF AI7242M User manual

Rough-In Plumbing
Measurements
luxury SErIES MODEL # AI7242M / AI28AIR7242TO (Tub Only)
rIvIEra MotIf
42”
3 1/2”
12 1/4”
Deck
Width 3”
Total Width
5 1/2”
SPECIfICatIoNS:
GENERAL SPECIFICATIONS:
Tub Size 72” x 42” x 23 1/2”
183 cm x 107 cm x 60 cm
Bathing Well 42” long
26” wide
21 1/4” interior depth
Maximum Water Depth 17 1/2”
Shipping Weight 249 lbs. / 113 kg
Tub Weight Filled 1060 lbs. / 481 kg
Tub Only Weight 138 lbs. / 63 kg
Weight w/Equipment 180 lbs. / 82 kg
Gallons to Overow 106 gal. / 401 L
Gallons to Operate 1 bather: 87 gal. / 329 L
2 bathers: 68 gal. / 257 L
ELECTRICAL SPECIFICATIONS:
Pump 1.75 HP; 12 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Optional Heater 1.5 kW; 12.5 AMP; 110V
Requirement 15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
OPTIONAL EQUIPMENT:
• Chromatherapy LED Lighting
• Comfort Pillow - Oval or Rectangle
• Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
• Bolt-On Grab Bar
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
• 1.5 kW Inline Maintenance Heater
• Lift & Turn Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
• Cable Drive Waste and Overow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
• Hand Held Jet - Chrome or Polished Brass
• 2 HP, 3-Speed Run-Dry Pump Upgrade
• Optional Pump Location
• Remote Pump Location
• Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading xture manufacturers.
9 Hydrotherapy Jets including:
- 4 Full Size Pressure-Flo Hydrotherapy Jets
- 3 Recessed Rotary Massage Jets
- 2 StressEaz Neck & Shoulder Therapy Jets
Aquatic Quality Features:
- 1.75 HP Run-Dry Pump with 20-Minute Timer
- Bath-Side On/Off Electronic Button
- ”Quiet Pad” Anti-Vibration Pump Mount for Quiet Pump Operation
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
STANDARD EQUIPMENT:
Fax-On-Demand
Document # 1071
The manufacturer accepts a 1/4” variance. There are variations on each tub and specications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub;
Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324
Back Angle
22˚
Back Angle
22˚
20 1/4”
72” 42”
21”
23 1/2”
66”
Two Person Bath
November 2007
68” 39 1/2”
4
3
2
1