
Safety and environment instructions
5/36EN
Refrigerator / User Guide
• The product shall be nstalled n a
dry and ventlated envronment.
Do not keep carpets, rugs or smlar
floor covers under the product.
Ths may cause rsk of fre as a
result of nadequate ventlaton!
• Do not block or cover ventlaton
holes. Otherwse, power
consumpton may be ncreased
and damage to your product may
occur.
• Do not connect the product to
supply systems such as solar
power supples. Otherwse,
damage to your product may occur
as a result of the abrupt voltage
fluctuatons!
• The more refrgerant a
refrgerator contans, the bgger
ts nstallaton room shall be. In
very small rooms, a flammable
gas-ar mxture may occur n case
of a gas leak n the coolng system.
At least 1 m of volume s requred
for each 8 grams of refrgerant.
The amount of the refrgerant
avalable n your product s
specfed n the Type Label.
• The nstallaton place of the
product shall not be exposed to
drect sunlght and t shall not be n
the vcnty of a heat source such
as stoves, radators, etc.
If you cannot prevent installation of the
product in the vicinity of a heat source,
you shall use a suitable insulation plate
and the minimum distance to the heat
source shall be as specified below.
- At least 30 cm away from heat
sources such as stoves, heating units and
heaters, etc.,
- And at least 5 cm away from electric
ovens.
• Your product has the protecton
class of I. Plug the product n a
grounded socket that conforms
wth the Voltage, Current and
Frequency values specfed n the
type label. The socket outlet shall
be equpped wth a fuse wth a
ratng of 10 A – 16 A. Our company
shall not be responsble for the
damages that shall be ncurred as
a result of operatng the product
wthout ensurng ground and
electrcal connectons made as per
local or natonal regulatons.
• The product’s power cable must
be unplugged durng nstallaton.
Otherwse, rsk of electrc shock and
njury may occur!
• Do not plug the product to loose, broken,
dirty, greasy sockets or sockets that has
come out their seats or sockets with a
risk of water contact.
• Place the power cord and hoses (if ava-
ilable) of the product so that they shall
not cause a risk of tripping over.
• Penetration of humidity to live parts
or to the power cord may cause short
circuit. Thus, do not use the product in
humid environments or in areas where
water may splash (e.g. garage, laundry
room, etc.) If the refrigerator is wet by
water, unplug it and contact an authori-
zed service.
• Do not connect your refrigerator to po-
wer saving devices. These systems are
harmful for the product.
1.6
Operational safety
• Do not use chemical solvents on the
product. These materials contain an
explosion risk.
• In case of a failure of the product, unp-
lug it and do not operate until it is repa-
ired by the authorized service. There is a
risk of electric shock!