Archos 70b Xenon User manual

Xenon Series
How to reinitialize my ARCHOS 70b Xenon ?
This process is recommended for your device if : it is frozen, it doesn’t
turn on or you are experiencing a software issue. It will allow you to
perform a low level format on your device. Thus all the data will be
deleted, you won't be able to retrieve them. We strongly recommend to
back them up first. Keep in mind that your device’s battery must be
charged enough to perform this operation.
1. If you can have access to the Android™ interface
a. Select the Settings app then select Backup & reset > Factory data
reset
b. Select "Reset tablet" and confirm
2. If you can’t access the Android™ interface
a. The tablet must be off (push the reset button if available or the
power button for 10 secs).
b. Press & hold Volume +
c. Plug the power supply into the tablet
d. On the boot selection menu, scroll down using Volume + and choose
"Recovery mode". Confirm with Volume -
e. The green robot will be displayed a few seconds then the recovery
menu will appear
Use volume buttons to navigate and validate with ON/OFF button
If you failed to access to the recovery
menu, please start again from the
beginning.
Page 1 / 2
(c) 2024 ARCHOS <[email protected]> | 2024-02-21 18:38
URL: http://faq.archos.com//index.php?action=artikel&cat=50&id=349&artlang=en

Xenon Series
a. Select "Wipe data/factory reset" and validate to restore your device
to its default settings
b. Select "Yes -- delete all user data" and validate to remove all the
user data
c. Select "Reboot system now" and validate to reboot the device
Your device has now been reinitialized. To download and install the original content
of your tablet, please see the following FAQ.
Unique solution ID: #1646
Author: Admin FAQ
Last update: 2015-06-24 16:21
PoweredbyTCPDF(www.tcpdf.org)
Page 2 / 2
(c) 2024 ARCHOS <[email protected]> | 2024-02-21 18:38
URL: http://faq.archos.com//index.php?action=artikel&cat=50&id=349&artlang=en