ARCO Extenso II User manual

1
Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Extenso ll
NL: Montagevoorschrift - Voer stap 1 t/m 10 uit.
UK: Mounting instructions - Please follow step 1 -10.
D: Montageanleitung - Bitte folgen Sie den Montageschritten 1- 10.
1/8
#4 #5
14x 1x Always use levers to unlock or lock extension system
step 1
step 2
step 1
All manuals and user guides at all-guides.com
all-guides.com

2
Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Extenso ll
2/8
Always use levers to unlock or lock extension system
6 x (M8x20)
All manuals and user guides at all-guides.com

3
Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Extenso ll
3/8
step 1
step 3
only when
extension = 104 cm
1x (M6x25)
Dont’t lock these screws !!!
They are used to adjust the height
of the extension leafs
step 2
only when extension = 2x 52 cm
when extension = 1x 52 or 1 x 104 cm follow
step 1 & 3
All manuals and user guides at all-guides.com

Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Extenso ll
4/8
8 x (M8x20)
Roller is standard, optional plastic or felt
Click !
Step 2: replace with optional
Step 1: remove current
4
All manuals and user guides at all-guides.com

7
Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Reminder: before extending open both levers
Position tube !
Lock screws !
6
5
Max.
&
Extenso II
5/8
Click !
step 1 step 2
All manuals and user guides at all-guides.com

9
Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
10
8
Extenso ll
6/8
Lock levers
step 1: position leafs
close
step 2
All manuals and user guides at all-guides.com
all-guides.com

Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Extenso ll
7/8
X= max. 0,5 / 1 mm, to adjust follow steps on page 7 & 8
X
X
loosen screws 2x
step 1 step 2 step 3
adjust 1x
tighten screws 2x
use #4
All manuals and user guides at all-guides.com

Arco contemporary furniture / 04 - 2014 / design: Willem van Ast
Extenso ll
8/8
loosen screws 1x
step 4 step 5 step 6
adjust 1x
tighten screws 1x
use #4
X= max. 0,5 / 1 mm, to adjust follow steps on page 7 & 8
X
X
All manuals and user guides at all-guides.com