User’s Manual –AREBOS Engine stand
3
Please read and save these instructions. Read through this user’s manual carefully before using
product. Protect yourself and others by observing all safety information, warnings and cautions.
Failure to comply with instructions could result in personal injury and/or damage to product or
property. Please retain instructions for future reference.
1.Safety instructions
Explanation of the symbols
•Warning! Ensure all Health and Safety, local authority, and general workshop practice
regulations are strictly adhered to when using this equipment.
•Before using the stand ensure it is in good working order.
•Replace or repair damaged parts. Use recommended parts only. Unauthorized parts may be
dangerous and will invalidate the warranty.
•Keep the stand clean for best and safest performance.
•Locate the stand in a suitable work area, keep area clean and tidy and free from unrelated
materials. Ensure there is adequate lighting.
•Use on a firm, level surface capable of sustaining the stand and the load.
•Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
•Ensure all non-essential persons keep a safe distance whilst the stand is in use.
•Lock mounting plate in position with locking pin before fixing a load and ensure the load is
centered and securely mounted on the mounting plate.
•When an engine is mounted, take the weight of the engine on the handle before removing
the locking pin.
•Ensure the stand and load is stable.
•To move a loaded stand, steady the load and push from behind the main post of the stand so
that the castor wheels are ahead of the load.
•DO NOT pull the unit backwards, or push from the side, as this may cause the stand to tip.
•Ensure surface over which the stand is to travel is strong enough to take the stand and load
and that it is not cracked, uneven or obstructed.
•DO NOT use unit if damaged.
•DO NOT allow untrained persons to use the stand.
•DO NOT exceed the rated capacity of 550 kg.
•Danger! DO NOT work under an engine mounted on the stand.
•DO NOT use the stand for purposes other than those for which it is designed.
•When not in use, store in a safe, dry, childproof location.
By means of a CE marking, it can be recognized that a product complies with the
legal requirements of European legal standards and therefore may be traded
within the European Community.
