
User’s manual –AREBOS Industry Vacuum Cleaner with socket outlet 2300W
10
•Plug the appliance and switch on.
•Turn the vacuum cleaner on.
•After filling the collecting container, the suction power is considerably reduced.
•Turn the vacuum cleaner off.
•Unplug the appliance after use.
•Empty and clean the collection container.
4.4 Wet vacuuming
•Caution: The paper filter bag and the HEPA filter are not suitable for wet vacuuming.
•Remove the HEPA filter from the filter basket and install the foam filter.
•Unwind the power cord.
•Attach the top of the vacuum cleaner to the collection container and secure it with the hook.
•To use the flexible hose, insert the end of the hose into the suction hole. Make sure, that it is
snapped in the position.
Caution: Before you start the appliance, make sure that the hose assembly is in the position
or else the appliance had mangled.
•Choose your desired accessory (brush or nozzle) and attach it to the suction hole.
•Adjust the airflow by pushing the sliding block up and down.
•Plug the appliance and switch on.
•Turn the vacuum cleaner on.
•After filling the collecting container, the suction power is considerably reduced.
•Turn the vacuum cleaner off.
•Unplug the appliance after use.
•Empty and clean the collection container.
5.Maintenance and cleaning
•Before carrying out any maintenance work, switch off the appliance and unplug the power
cord from the wall socket.
•Clean the surface with a soft, dry cloth.
•Never use water or detergents such as garbage, gasoline or thinner to clean the unit.
•Press the switch, release the handle. The filter is cleaned by moving the handle up and down.