Arenti AINANNY User manual

AINANNY
with Monitor
USER MANUAL
EN Smart baby monitor
FR Babyphone intelligent
ES Vigilabebés inteligente
DE Intelligentes Babyphone
IT Baby monitor intelligente
Compatible with Amazon Alexa & Google Assistant

EN
Quick start guide
1. Packing list
2. Product description
4. Connection of camera and App
5. Pairing of camera and monitor
3. Installation
1. Packing list
6. Usage
7. FAQ
Camera X1 Power adaptor X2 USB cable X2 Reset pin X1
Monitor X1
Bracket X1
Headgear X1
Quick guide X1
Warning sticker X2 Screws X3
2. Product description
Status light
Speaker
Microphone
SD card slot
Call/Pairing
Type C
Reset
Status light
Call/Pairing
Reset
Blinking red light: wait for network connection (slow)
connecting the network (fast)
Solid blue light on: camera is working correctly Solid
red light on: camera is malfunctional
Press to make a call; long press to pair
Press and hold for 5 seconds to reset the camera (if you
have modified settings, they will return to factory defaults)

EN
Direction Control the rotation directions; select the menu items
Microphone
Status light of charging
Status light of using
Antenna
ON/OFF button
Speaker
Screen holder
Zoom in/out
Menu
Direction
OK
Call
Back
SD card slot
Reset
Micro USB
Orange light: Charging
Green light: Fully charged
Status light
of charging
Status light
of using
Yellow light: The monitor is on
No light: The monitor is off
Adjust the angle to get better signals
Antenna
ON/OFF button Long press 5s to turn on and turn off the monitor
Zoom in/out Zoom the image in 1X, 2X or 4X
Menu
On homepage, press to enter the menu interface;
On homepage, long press to enter the setting interface
OK Confirm
Call Make a call after pressing the button
Back
Press to back up;
On homepage, long press to stop playing music

EN
3. Installation
1 Install the camera on a flat
surface.
2 Use the included mounting bracket
to fix the camera to a clean surface.
4. Connection of camera and App
Connect the camera to the App
The camera can be connected both to the monitor and the App. Generally,
it is connected to the monitor by default.
Follow the steps below to connect the camera to the App:
1. Make sure the Wi-Fi network is a 2.4 GHz network, as the camera doesn't
support 5 GHz Wi-Fi.
2. Download the corresponding App on your phone. Register a new account
to log in or log indirectly.
3. Reset the camera using a pin until the status light is red in fast blinking.
(You have to connect the camera to the App within 2 minutes; otherwise,
you have to reset the camera again.)
(If you are using the monitor, the audio and video will be temporarily
disconnected, and will automatically resume after the camera is successfully
configured with the network. The maximum time is 2 minutes.）
4. Follow the step instructions on your smart phone to add the monitor, and
scan the QR code with your camera.
App Download
The App is available for both iOS and Android OS. Scan the QR code or
search "Arenti" at App Store and Google Play. Download and install the App
at your phone.You can select the App according to needs.
· Support

EN
Set up router
The router supports the 2.4GHz WiFi (doesn't support the 5GHz), and is
connected to the WiFi network.Please set the parameters of the router
before connecting the WiFi network, and record the SSID and password of
your WiFi.
Please keep network available
2.4GHz 5GHz
5. Pairing of camera and monitor
Power on the camera and the monitor, and they will automatically connect.
If the connection fails, please follow the steps below to pair. The pairing is
distance limited, so make the distance between the camera and the
monitor is no more than 200m.
Unbind the monitor and camera:
1. Press Menu button on the monitor screen, and select > Camera.
2. Select Camera 1 or Camera 2 which you need to unbind.
3. Long press OK button to release the binding.
Pair the monitor and camera:
1. Press Menu button on the monitor screen, and select > Camera.
2. Select Camera 1 or Camera 2 which you need to pair.
3. Long press the camera pairing button until you hear the prompt tone.
4. Press OK button on the monitor screen to start pairing.
5. For 2 cameras, repeat step 2 ~ step 4.

EN
6. Usage
Note：
If you have addded 2 cameras, the monitor screen will display 2 live views
at the same time. If you want to set parameters or enable functions of
one of the cameras, you need to select the camera first.
The method of camera selection is as follows:
Press the back key on the home page to enter the switch camera mode
and the camera icon will flash. Press the left and right buttons to switch
the camera to be controlled.
Rotate the camera
You can adjust the monitoring angle for a better vision.
The direction buttons on the monitor screen are available when the
camera is powered on. Press direction buttons to rotate the camera
horizontally and vertically, for a better vision.

EN
Photo & video
Take a photo:
You can take a photo when you want to capture an interesting scene of baby.
Press Menu button on the monitor screen, select and press OK to
take a photo.
Record a video:
You can record a video when you want to capture a meaningful time of baby.
Press Menu button on the monitor screen, select and press OK to
record a video.
View the taken photos and recorded videos:
1. Press Menu button on the monitor screen, select and press OK to
enter the interface.
2. Select the camera and date, select the photo or video you want to view,
and press OK to enter preview mode.
* For a video, press OK to play or pause in the preview mode.
* Press backup button to quit preview or return to main menu.
Play music
You can play music to sooth your baby when baby is crying or sleeping.
There are various soft music to select.
Press Menu button on the monitor screen, select and press OK to enter
music interface. You can select different music, change the music cycle
mode, or adjust the music volume.

EN
Feeding reminder
Remind you to feed your baby, when you are too busy, or when you want
to give your baby a regular diet.
1. Press Menu button on the monitor screen, and select > Feeding Reminder.
2. Press UP and DOWN direction buttons to select between 4 time options,
and press OK to start time setting.
3. When start to set up one feeding time, press LEFT and RIGHT direction buttons
to change options between hour, minute, second and on/off; and press UP and
DOWN direction buttons to change values and select on or off.
4. Press OK to save settings.
5. Select on or off to open or close feeding reminders. You can set up to 4
feeding times one day. And when the set time is up, a feeding alarm will
appear on the monitor screen.
Smart care
You can turn on functions of motion detection, noise detection and cry detection,
so that you can know the baby status immediately, no matter you are sleeping,
working, cooking and so on.
1. Press Menu button on the monitor screen, and select > SmartCare.
2. Press UP and DOWN direction buttons to select options between motion detection,
noise detection, cry detection and alarm volume, and press OK to save.
3. When start to set up one detection mode, press LEFT and RIGHT direction buttons
to changeoptions, and press UP andDOWN direction buttons to adjustsensitivity.
* You can select different sensitivity according to needs. Low is low
sensitivity, and high is high sensitivity.
4. When set up the alarm volume, press LEFT and RIGHT direction
buttons to adjust.
5. Press OK to save settings.
6. There will be a alarm when the set detection is triggered, press OK to
stop alarm.

EN
Temperature and humidity detection
You can real-time monitor the temperature and humidity of your baby room.
When the temperature and humidity are out of range, you can get the alarms
immediately, and then take measures.
1. Press Menu button on the monitor screen, and select > Temperature
and humidity.
2. Press UP and DOWN direction buttons to select options between temperature
range, humidity range and out of range reminder, and press OK to startsetting.
3. Press LEFT and RIGHT direction buttons to change options, and press UP
and DOWN direction buttons to change values and units.
4. Press OK to save settings.
5. In Out of range reminder option, select to turn on or off the alarm when
the temperature and humidity are out of range.
Safety Protection
You can turn on or turn off the Wi-Fi network channel so that others cannot
live view the videos by App if the function is off. And you can also view the
visited records as all visits through the App will be recorded.
Night light
You can turn on night light if needed, and you you can set lighting mode
and light color.
Press Menu button on the monitor screen, and select > .
Or press Menu button, and select > Light > Night light to enter the
setting interface.
Safety Protection Night light

EN
.
General setting
Set upbrightness:
1. Press Menu button on the monitor screen, select and press OK to
enter the interface.
2. Press UP and DOWN direction buttons to adjustbrightness.
Set up time:
1. Press Menu button on the monitor screen, and select > Time setting.
2. Press direction buttons to change date, time and time displaying mode.
Set up language:
1. Press Menu button on the monitor screen, and select >Language.
2. Select the language you need.
Set up sleep mode:
You can set up sleep mode to increase standby time.
1. Press Menu button on the monitor screen, and select > Sleep mode.
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60
minutes or off.
Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of
the camera. You can also turn off the status indicator, if you think it will
affect your baby’s sleep.
Press Menu button on the monitor screen, and select >
(Or Press Menu button，select > Light > Status light.)
SD card:
1. Press Menu button on the monitor screen, and select > SD card
management. Then you can view the total capacity and remaining
capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that
the important data is backed up.
Upgrade:
Make sure your camera is connected to a the 2.4 GHz Wi-Fi.
You can upgrade your camera when the upgrade alarm appears. Or Press
Menu button on the monitor screen, and select > Device information to
check whether there is a upgrade.
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the
monitor screen. Please charge the monitor as soon as possible.

EN
7. FAQ
Q: The monitor cannot be previewed properly?
A: Check whether the monitor has connected to the camera. If not, pair the
camera and the monitor firstly.
Q: Cannot find the pairing button?
A: The pairing button is the call button of the camera. Long press the button
for 3 seconds, and follow the step instructions of the monitor. (To enter the
pairing interface of the monitor, press Menu button on the monitor screen,
and select > Camera Management.)
Q: What if the monitor screen is stuck and it doesn’t work while pressing any
buttons?
A: Press the reset button of your monitor with the pin, and then long press the
power button of your monitor to restart it.
Q: Why the camera or the monitor cannot identify the SD card?
A: Confirm whether the SD card is normal and the format is FAT32.
Q: Why I can’t get the notifications with my cell phone App when I connect
the camera to the monitor?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened; Message notification and
authority confirmation in the mobile phone system have been opened.
Q: Why the monitor can't view video after the camera is connected to the App?
A: The monitor has a 2 minute interruption time when the camera is reset, and
it will automatically resume after 2 minutes. If it doesn’t recover, try to pair
the monitor and camera again.

7
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users and installers must
be provide with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.