Arenti GO1 W1 User manual

1. Camera Introduction ....................................................................................................................... 2
Device Overview.................................................................................................................................... 2
Status Indicator...................................................................................................................................... 3
Charge camera....................................................................................................................................... 3
2. Setup and Installation ..................................................................................................................... 3
Set up the Camera................................................................................................................................ 3
Install the camera.................................................................................................................................. 7
3. View Your camera ............................................................................................................................ 9
Adjust Device list................................................................................................................................... 9
Multiple Views......................................................................................................................................10
Live video...............................................................................................................................................11
Manually Capture................................................................................................................................12
Manually Record .................................................................................................................................13
Full Screen .............................................................................................................................................13
2-Way Audio ........................................................................................................................................14
4. Alarm and Detection .....................................................................................................................14
Set up Motion detection................................................................................................................... 15
Alarm Interval.......................................................................................................................................15
Human shape detection. ..................................................................................................................16
Alert Plan ...............................................................................................................................................16
Set up Detection Area .......................................................................................................................17
Set up Push notifications.................................................................................................................. 18
5. Recording and Playback...............................................................................................................19
Micro SD card Recording .................................................................................................................19
Cloud storage service........................................................................................................................ 21
Playback .................................................................................................................................................23
Album .....................................................................................................................................................25
6. Camera settings ..............................................................................................................................26
Camera Name ......................................................................................................................................26
Share Arenti Devices with others...................................................................................................27
Device information .............................................................................................................................29
Installation Guide ................................................................................................................................30

Basic function .......................................................................................................................................31
Network indicator........................................................................................................................... 31
Speaker volume ..............................................................................................................................32
Time setting......................................................................................................................................32
Screen Flip.........................................................................................................................................33
Night Vision......................................................................................................................................33
Power Management......................................................................................................................34
Amazon Echo Show & Google Home.......................................................................................... 34
Device version......................................................................................................................................35
Delete the Device................................................................................................................................ 36
7. Use Arenti APP ................................................................................................................................37
Messages ...............................................................................................................................................37
Sharing History................................................................................................................................38
Alarm Message................................................................................................................................38
System Messages ...........................................................................................................................38
Scene....................................................................................................................................................... 39
Account ..................................................................................................................................................39
APP Settings..........................................................................................................................................41
8. FAQ and Troubleshooting...........................................................................................................44
FAQS .......................................................................................................................................................44
Troubleshooting..................................................................................................................................45
1. Camera Introduction
Device Overview
GO1 W1 are Outdoor wireless battery cameras that are compact and can be seamlessly
integrated into your home. Loaded with smart features, they can do many things like check
the live video wherever you are. Or send you customized motion alerts. With unbeatable
prices, they make smart and high-quality home protection accessible to everyone.

Status Indicator
Front Status Indicator
Camera status
No light on
Not power /stand by
Constant blue/slow flashing
Working properly/ WiFi Connection succeeded
Blue fast flashing
Upgrading
Red flashing slowly
Waiting to connect/ WiFi is not configured
Red flashing fast
Network abnormal/ WiFi connection failed
Charge camera
Take off the rubber, plug in the Micro-USB charge the camera.
Fully charge it before mounting the doorbell at your front door.
Charge indicator
Constant red: camera in charging
Constant blue: camera fully charged
Charging time(5V/1A)
10 hours from 1%-100%
Notices: The battery life varies depending on usage. In most common cases, a camera
may have up to 10 events per day and each recording lasts 20 seconds on average.
Under this scenario, the camera battery life can last 3 to 6 months.
2. Setup and Installation
Set up the Camera
•What you’ll need.
1. Wi-Fi and a working broadband internet connection with at least 2 Mbps upload

speed.
2. A phone or tablet with iOS 8 or later or Android 4.2 or later
3. A power outlet
•How the system works
After Camera connects with WIFI, allows you to check the view anytime and anywhere via
Arenti APP.
Normally camera will be in sleep mode to reduce the battery consumption, it will wake up
and work when the PIR motion sensor is triggered.
•Power on
Find the power key at the camera body side, press and hold it for 5 seconds to start the Camera,
you will see the front network indicator light will on and flash red slowly means boot up is
finished.
Tip: Do not move the lens of the camera to force it to rotate after turning it on.
Connect Arenti APP
Scan QR code to download and install the Arenti APP. Also, you can search ‘Arenti on App
Store (IOS); Play Store(Android). Download and install Arenti APP. Register and log in.
Open the Arenti APP home page, Click’+’ at the right top page. Follow the guide on the
APP to add the camera.
1. Choose Battery Camera >GO1 camera on APP and power on the GO1 camera

2. Waiting for camera to boot up around 10s. Make sure the network indicator red
flashing slowly and enable it . If not, please reset the camera(move thecamera head
and u top find the reset bottom), then wait the network indicator red flashing slowly.
Then tap ‘Next’.
3. Select the wifi you want camera to connect, and input the correct Password.Tap ‘Next’.

4. APP will generate the QR code for camera to scan. Keep your phone 5-8 inches(15-
25cm) from the lens . Please scan the QR code when indicator in red flashing slowly.
5. A tone will be heard when successfully scanned. Then tap ‘Notification tone heard’
After reading QR code, camera get the WiFi information(name/password) from APP QR
code, and start to connect the WiFi. The network indicator will turn to red fast flashing.
6. Around 30s later, the camera indicator turns to constant blue, means camera

connect the WiFi. And APP will find the device and add it to APP. Tap ‘Done’ to finish
the process.
Note: When adding the camera, ensure the WIFI network is good, the camera is normally
turned on, and the indicator light flashes red slowly. After the connection is successful, the
indicator light is blue.
Install the camera
Find a position where you can get the desired field of view.
Consider the below factors:
1. Avoid direct sunlight;
2. Keep it in range of your router WIFI;
3. Avoid the front of the lens facing the plant or porch light; Avoid facing a busy road,
heat source avoids false triggering of PIR.
4. Place it 2-3 meters /79-118’’above the ground-close enough to see someone’s face
and talk to them through the camera. Make sure that the camera can see what you
want to see.

Mount on the wall:
Installation Precautions:
1. The installation wall needs to be able to bear at least 3 times the total weight of the
camera.
2. To prevent injury, the unit must be securely fastened to the ceiling or wall by the
installation instructions

3.View Your camera
Adjust Device list
You can just the list view (List/Grid) and sequence of your device.
Tap the icon, you will see , tap the List view ,the device will be the simple
camera icon in list. Tap the Sort to adjust the device sequence.
Home page privacy
Multiple views
Play Camera Live video
Play camera history video
Get technical support
Add new device
Video audio ON/OFF
Manually capture, the image will
save to the album
Full screen mode
Manually record, the recording will
save to the album
Device Wi-Fi signal
Sub-stream mode
Press to talk(2-way
audio)
Main-stream mode
Current network bit rate

Press and hold to move the camera to the sequence you need. Then tap Done ,back to the
device list.
Multiple Views
If you have 2 or more cameras added in your Arenti App, you can view multiple
streams at the same time.

Tap icon , the first 4 cameras will show in one screen. You can slide the screen to
check next 4 camera.
You can choose camera to 2-way audio, Manual capture, record.
Live video
Tap Icon to view the camera Live video. Tap the SD to choose SD/HD different
resolution.

Manually Capture
Tap icon to capture the image. Image will save in Album.

Manually Record
Tap icon to start record the video, tap to stop the record, the record will save
in Album.
Full Screen
Tap icon to check the video in full screen.

2-Way Audio
Tap/Press the icon to talk.
4.Alarm and Detection
About Motion Detection

Arenti camera determines whether each macroblock has moved by dividing
the grid. When the number of moved blocks reaches a certain proportion of the
number of armed blocks, the alarm will start. The working principle of motion detection is
that camera will judge it as motion when differences in 2 frames reach 0.5%-10% (customize
by adjusting motion sensitivity) of the image. When the picture changes, the number
calculated and compared will exceed the threshold and instruct the system to automatically
make corresponding process.
Set up Motion detection
Go to camera live video page- Settings-Alert Settings-Motion detection-On
Battery camera equipped PIR sensor , It will detect the body heat from 2~10 meters. And
you can customize the detection range to meet your needs.
Set from Arenti APP-Device (tap device to live video page)-Settings-Alert settings- Motion
Detection-Sensitivity
Sensitivity
Detection range
Level 1-3 (Low)
Up to 2-5 meters
Level 4-7 (Mid)
Up to 5-8 meters
Level 8-10 (High)
Up to 8-10 meters
Note: sun's rays, cars, animal, other heat source will trigger the pir sensor and cause the
false alarms.
Alarm Interval
User can set the interval time between the Alarms, to reduce the useless notifications and
save camera battery consumptions. The longer interval time set, the less alert received and

consume less camera battery.
Support to set off/2/5/10 minutes interval according to the actual usage scenario.
Human shape detection.
To reduce the false alarms.Camera support set the day/night human detection. If enabled, it
will alert only when detected the human shape .
Note: The arithmetic is not 100% accurate; Especial at the night, camera may think that's not
a human shape and not send alert.
Alert Plan
User can set the time period of the alarm, the device only triggers alarm event during the
time period

Set up Detection Area
Go to camera live video page- Settings-Alert Settings-Motion Detection-Alarm Area
Tap the icon to choose the area you want to detect.
Tap the icon to erase to yellow area that you don’t want to detect.
Tap ‘Save’ to save the Detection area settings.
Note: Camera will only detect the motion in yellow area.

Set up Push notifications
1. Go to camera live video page- Settings-Alert Settings-Receive Alert Notifications:
Enable
Your mobile phone will receive the Alarm notification when camera detect the motion.
2. Set your phone to allow Arenti App to send push notifications. Go to your phone
Settings, find Notifications and among the App list find the Arenti App. Make sure
the mobile phone allow the Arenti App send notifications.
Mobile phone-Settings-Notifications-APP notifications-Arenti APP

5.Recording and Playback
Micro SD card Recording
With an Micro SD card inserted the camera can save motion alarm recordings or continuous
recordings to the Micro SD card.
Choose a suitable SD card
1. Recommend SD card spec: Class 10 and above, Format FAT32, 2G-128G, brand Micro
SD Card
2. Choose the SD Card Capacity
Example : 32GB SD card with 1080P camera
Event recording (30s for one event,20events per day):around 8 months
Note: When full, Camera will overwrite the oldest recordings.
Insert the Micro SD card
Take off the rubber, following the pictures to push the Micro SD card until it's locked or you
hear a ‘Click ‘sound.

Set Recording(Micro SD card)
1. Event recording: Arenti APP-Device(tap device to live video page)-Settings-Recording
Management- Event recording-Choose the Recording time-10/20/30 sseconds
Note: It will only record the motion alarm recordings to the SD card. Each event
recordings 10/20/30 seconds
SD Card Capacity
After you insert the properly SD card, You can check the SD card Capacity/Remaining
Capacity information.
Support to Format the SD card by APP. After format the SD card, all data will be clear in SD