Arenti GO1 User manual

Wireless battery Wi-Fi security camera
COMPATIBLE WITH AMAZON ALEXA & GOOGLE ASSISTANT
QUICK GUIDE
GO1

EN
Quick start guide
1. Packing list
2. Product description
3. Installation
4. Product configuration
5. Specification
6. Legal notice
1. Packing list
2. Product description
Power
adaptor X1
(optional)
Screw X3
Power
cable X1
Quick guide X1
Camera X1
Bracket X1
Reset pin X1
Silicone plug X1
Reset
SD card slot
Power button &
Charging indicator
Power port
Microphone
PIR
LED indicator
Lens Speaker
Photoresistor

1m
2m
3m
2m 10m
3. Installation
Find a position where you can get the desired field of view.
Consider the below factors:
1. Avoid direct sunlight.
2. Keep it in range of your router WiFi.
3. Avoid the front of the lens facing the plant or porch light;
Avoid facing a busy road.
4. Place it 2-3 meters (79-118 inch) above the ground - close
enough to see someone's face and talk to them through the
camera. Make sure that the camera can see what you want to
see.
Notice
To reset the device, press and hold the reset button for 5s.
The camera beeps when the operation is completed.
LED indicator of camera:
Flashing red light (slow)
Flashing red light (fast)
Fixed red light
Fixed blue light
Wait for network config
Connecting the network
Camera is malfunctional
Camera is working correctly
EN

· Screw Bracket Installation
1. Fix the screw bracket on the wall with screws.
2. Install the device in the bracket and lock it with the bottom
screw.
0~90°
0~360°
After adjusting the
angle, please lock
the screw
Registration
EN
4. Product configuration
Scan QR code to download and install the Arenti APP. Or you
can search "Arenti" on App Store (iOS) or Google Play (Android).
Open the App. If you are a new user, tap to create a new
account and follow the prompts to complete account setup.
Note: Please read and agree to the Privacy Policy and Terms of Use before
creating your account.

Note: When pairing, please put the camera and mobile phone close to
the router. If camera is not in the red slow blinking after 30 seconds of
powering on, press and hold the reset button for 5 seconds to reset, and
then restart to pair the camera with the APP.
Open APP home page, Click "+" or "Add" and select icon
according to actual camera.
Power on the device. For about 30 seconds, the camera will
emit start-up tone and LED indicator will flash red slowly.
Select the Wi-Fi network and input the password, and then
click "Next". Make sure that your phone has connected to a
fluent and steady Wi-Fi already.
Pairing
EN

Click “Next” and use the camera to scan the QR code in the App
on your mobile phone, when the sound “dong dong dong” is
heard, click “Notification tone heard.”, and then the LED
indicator will become solid blue after few seconds.
If you have multiple cameras, please follow steps again to
add devices one by one.
To change Wi-Fi network, please restore the camera to
factory settings and follow steps to add the camera.
Notice
EN
Scan the
QR code
of APP
If no device is found and the pairing process is not successful,
please refer to the following instructions:
1. Ensure that the Wi-Fi network is set to 2.4GHz.
2. Verify that the entered Wi-Fi password is correct and that
the mobile device is connected to the same Wi-Fi network.
3. Make sure the camera is in pairing mode.
4. Check for network activity on your Wi-Fi.
If none of the solutions work or if you have any other issues,
please contact [email protected] for assistance.

5. Specification
Support
6. Legal notice
www.arenti.com
Symbols Direct current (DC)
Don't throw batteries or out of order products with the
household waste (garbage). The dangerous substances
that they are likely to include may harm health or the
environment. Make your retailer take back the products
or use selective collect of garbage proposed by your city.
Hereby, we declares that the radio equipment type
'GO1' is in compliance with the Directive 2014/53/EU
The full test of the EU declaration of conformity is
available at the following Internet address:
www.arenti.com
EN
Product name
Resolution
Angle of view
IR Distance
Working temp
Local storage
Input power
Consumption
Supported phone OS
2.4G Wi-Fi
GO1 GO1Q
2304 x 1296 2560 x 1440
135°
Up to 10m
-20°C to 50°C
Micro SD card (Max. 128GB) Micro SD card (Max. 256GB)
DC 5V / 1A
Up to 3W
iOS 9 / Android 5.0 and above version
2412-2472 MHz (Max. power<20dBm )

ﺞــﺘﻨﳌا تﺎــﻳﻮﺘﺤﻣ .1
ﺞﺘﻨﳌا ﻒــﺻو .2
1X (يرﺎﻴﺘﺧا) ﺔﻗﺎﻄﻟا لﻮﺤﻣ
1X ءﺎﺑﺮﻬﻜﻟا ﻞﺑﺎﻛ
1X ﻊﻳﴎ ﻞــﻴﻟد
1X ﺮﻳﻮﺼﺗ ﺔﻟآ
1X سﻮﻗ3X ﻲﻏﺮﺑ
AR
support@arenti.com
ﻊﻳﴪﻟا ءﺪــﺒﻟا ﻞﻴﻟد
ﺞﺘﻨﳌا تﺎــﻳﻮﺘﺤﻣ.1
ﺞﺘﻨﳌا ﻒــﺻو.2
ﺐﻴﻛﱰﻟا ﺔــﻘﻳﺮﻃ.3
ناﱰﻗﻻا ﺔــﻘﻳﺮﻃ.4
ﺞﺘﻨﳌا تﺎــﻔﺻاﻮﻣ.5
ﻮﻧﺎﻗ رﺎﻌــﺷإ.6
1X نﻮﻜﻴﻠﻴﺳ ﺲﺒﻘﻣ1X ﺖﻴﺒﺜﺘﻟا رﺴﻣ
1
2
3
4
5
6
7
8
9
10
11

COMPATIBLE WITH AMAZON ALEXA & GOOGLE ASSISTANT
ﻆﺣﻼﻳ
AR
support@arenti.com
.ِِناﻮﺛ 5 ةﺪﳌ ﻂــﺒﻀﻟا ةدﺎﻋإ رز ﲆــﻋ راﺮﻤﺘــﺳﻻا ﻊﻣ ﻂــﻐﺿا ،زﺎــﻬﺠﻟا ﻂــﺒﺿ ةدﺎــﻋﻹ
.ﺔﻴﻠﻤﻌﻟا لــﺘﻛا ﺪــﻨﻋ ًﺎــﺗﻮﺻ اــﻣﺎﻜﻟا رﺪــﺼﺗ
:اﻣﺎﻜﻠﻟ LED ﴍﺆــﻣ
(ءﻲﻄﺑ) ﺾــﻣاو ﺮﻤﺣأ ءﻮــﺿ
(ﻊﻳﴎ) ﺾﻣاو ﺮــﻤﺣأ ءﻮﺿ
ﺖﺑﺎﺛ ﺮــﻤﺣأ ءﻮﺿ
ﺖﺑﺎﺛ قرزأ ءﻮــﺿ
ﺔﻜﺒــﺸﻟا ﻦﻳﻮﻜﺗ ﺮــﻈﺘﻧا
ﺔﻜﺒــﺸﻟا ﻞﻴﺻﻮﺗ
ﺔﻠﻄﻌﻣ اــﻣﺎﻜﻟا
ﺢﻴﺤﺻ ﻞﻜــﺸﺑ ﻞــﻤﻌﺗ اــﻣﺎﻜﻟا
ﺖــﻴﺒﺜﺘﻟا .3
LED ﴍﺆﻣ .1
نﻮــﻓوﺮﻜﻴﳌا .2
ﺔﺳﺪﻌﻟا .3
ﻮﺿﻼﻟا موﺎــﻘﳌا .4
ﺬﺤــﺸﻟا ﴍﺆﻣ .5
ﺔﻗﺎﻄﻟا حﺎــﺘﻔﻣ ﻊــﻣ
ءاﺮﻤﺤﻟا ﺖــﺤﺗ ﺔﻌــﺷﻵا ﺮﻌــﺸﺘﺴﻣ .6
تﻮﺼﻟا ﱪــﻜﻣ .7
USB ﻦﺤــﺷ ﺬﻔﻨﻣ .8
ﻂﺒﻀﻟا ةدﺎــﻋإ رز .9
رــﺴﳌا ﺐﻘﺛ .10
SD وﺮــﻜﻳﺎﻣ ﺔــﻗﺎﻄﺑ ﺔــﺤﺘﻓ .11
.بﻮﻠﻄﳌا ﺔــﻳؤﺮﻟا لﺎﺠﻣ ﲆــﻋ لﻮﺼﺤﻟا ﻚــﻨﻜ ﺚــﻴﺣ ﻊــﺿﻮﻣ ﻦــﻋ ﺚــﺤﺑا
:ﺔﻴﻟﺎﺘﻟا ﻞــﻣاﻮﻌﻟا رﺎــﺒﺘﻋﻻا ــﻌﺑ ﺬــﺧ
.ةﴍﺎﺒﳌا ﺲﻤــﺸﻟا ﺔﻌــﺷأ ﺐــﻨﺠﺗ .1
.ﻚﺑ صﺎﺨﻟا WiFi ﻪــﻴﺟﻮﺘﻟا زﺎــﻬﺟ قﺎــﻄﻧ ﰲ ﻪــﺑ ﻆــﻔﺘﺣا .2
؛ﺔﻓﴩﻟا ءﻮــﺿ وأ تﺎﺒﻨﻠﻟ ﺔــﺳﺪﻌﻟا ﻦــﻣ ﻲــﻣﺎﻣﻷا ءﺰــﺠﻟا ﺔــﻬﺟاﻮﻣ ﺐــﻨﺠﺗ .3
.ﻢﺣدﺰﻣ ﻖــﻳﺮﻃ ﺔﻬﺟاﻮﻣ ﺐــﻨﺠﺗ ﻊــﻣ
- ضرﻷا قﻮﻓ (ﺔﺻﻮﺑ 118-79) رﺎــﺘﻣأ 2-3 عﺎــﻔﺗرا ﲆــﻋ زﺎــﻬﺠﻟا ﻊــﺿ .4
ﻪﻌﻣ ثﺪــﺤﺘﻟاو ﺎﻣ ﺺﺨــﺷ ﻪﺟو ﺔــﻳؤﺮﻟ ﻲــﻔﻜﻳ ﺎــ ﺎــًﺒﻳﺮﻗ
.ﻪﺘﻳؤر ﺪــﻳﺮﺗ ﺎﻣ ﺔﻳؤر ﺎــﻬﻨﻜ اــﻣﺎﻜﻟا نأ ﻦﻣ ﺪــﻛﺄﺗ .اــﻣﺎﻜﻟا لﻼــﺧ ﻦــﻣ

AR
support@arenti.com
1m
2m
3m
2m 10m
رﺴﳌا سﻮﻗ ﺐﻴﻛﺮﺗ •
.ﻲﻏاﱪﻟا ماﺪﺨﺘﺳﺎﺑ ﻂﺋﺎﺤﻟا ﲆﻋ رﺴﳌا ﺔﻣﺎﻋد ﺖﻴﺒﺜﺘﺑ ﻢﻗ .1
.ﲇﻔﺴﻟا رﺴﳌﺎﺑ ﻪﻠﻔﻗو ﻞﻣﺎﺤﻟا ﰲ زﺎﻬﺠﻟا ﺖﻴﺒﺜﺘﺑ ﻢﻗ .2
0~90°
0~360°
رﺴﳌا ﻞﻔﻗ ﻰﺟﺮﻳ ،ﺔﻳواﺰﻟا ﻂﺒﺿ ﺪﻌﺑ

AR
support@arenti.com
.بﺎــﺴﺤﻟا داﺪﻋإ لﻛﻹ تﺎﺒﻠﻄﺘﳌا ﻊــﺒﺗاو بﺎــﺴﺤﻟاﺪﻳﺪﺟ مﺪﺨﺘــﺴﻣ ﻞﻴﺠــﺴﺗ
.ﺔﻴﺻﻮﺼﺨﻟا ﺔــﻴﻗﺎﻔﺗا ﲆﻋ ﻖــﻓاﻮﺗ نأ ﺐﺠﻳ :ﺔــﻈﺣﻼﻣ
ماﺪﺨﺘــﺳﻻا طوﴍو ﺔﻴﺻﻮﺼﺨﻟا ﺔــﺳﺎﻴﺳ ةءاﺮﻗ ﺐﺠﻳ ،ﻚﺑﺎــﺴﺣ ءﺎــﺸﻧإ ﻞﺒﻗ :ﺔﻇﻮﺤﻠﻣ
.ﺎﻬﻴﻠﻋ ﺔــﻘﻓاﻮﳌاو
ناﱰﻗﻻا ﺔــﻘﻳﺮﻃ .4
،ًﺎﻀﻳأ Google ﻖﻴﺒﻄﺗ ﺖــﻴﺒﺜﺗو ﻞﻳﺰﻨﺘﻟ ﺎًﻴﺋﻮﺿ ﺔــﻌﻳﴪﻟا ﺔﺑﺎﺠﺘــﺳﻻا ﺰﻣر ﺢــﺴﻣا
(Android) Google Play وأ (IOS)تﺎﻘﻴﺒﻄﺘﻟا ﺮــﺠﺘﻣ ﲆﻋ "Arenti" ﻦﻋ ﺚــﺤﺒﻟا ﻚــﻨﻜ

AR
support@arenti.com
ناﱰﻗﻻا
اﻣﺎﻜﻠﻟ ًﺎــﻘﻓو ﺰﻣﺮﻟا ﻚــﻟﺬﺑ دﺪــﺣو "ﺔــﻓﺎﺿإ" وأ "+" ﲆــﻋ ﺮــﻘﻧاو ،ﻖــﻴﺒﻄﺘﻠﻟ ﺔﻴــﺴﻴﺋﺮﻟا ﺔــﺤﻔﺼﻟا ﺢــﺘﻓا
،ًﺎﺒﻳﺮﻘﺗ ﺮــﻤﺣﻷا نﻮــﻠﻟﺎﺑ LED ﴍﺆــﻣ ﺾﻣﻮﻴــﺳ و ﺔــﻴﻧﺎﺛ 30 ةﺪــﳌ زﺎــﻬﺠﻟا ﻞﻴﻐــﺸﺘﺑ ﻢــﻗ ،ﺔــﻴﻠﻌﻔﻟا
. ءﻂﺒﺑ ءﺪــﺑ ﺔــﻤﻐﻧ اــﻣﺎﻜﻟا ﻦــﻣ ﺚﻌﺒﻨﺘــﺳ
.ﻪﻴﺟﻮﺘﻟا زﺎــﻬﺟ ﻦــﻣ بﺮﻘﻟﺎﺑ لﻮــﻤﺤﳌا ﻒﺗﺎﻬﻟاو اــﻣﺎﻜﻟا ﻊــﺿو ﻰــﺟﺮﻳ ،ناﱰــﻗﻻا ﺪــﻨﻋ :ﺔــﻇﻮﺤﻠﻣ
ﻊﻣ ﻂﻐﺿﺎﻓ ،ﻞﻴﻐــﺸﺘﻟا ﻦــﻣ ﺔــﻴﻧﺎﺛ 30 ﺪــﻌﺑ ﺮــﻤﺣﻷا نﻮــﻠﻟﺎﺑ ءﻂــﺒﺑ ﺾــﻣﻮﺗ اــﻣﺎﻜﻟا ﻦــﻜﺗ اذإ
ناﺮﻗﻹ ﺎﻬﻠﻴﻐــﺸﺗ ﺪــﻋأ ﻢﺛ ،ﻴﻌﺘﻟا ةدﺎــﻋﻹ ٍناﻮــﺛ 5ةﺪﳌ ﻂــﺒﻀﻟا ةدﺎــﻋإ رز ﲆــﻋ راﺮﻤﺘــﺳﻻا
.ﻖــﻴﺒﻄﺘﻟﺎﺑ اــﻣﺎﻜﻟا
."ﱄﺎﺘﻟا" قﻮــﻓ ﺮﻘﻧا ﻢﺛ ،روﺮــﳌا ﺔﻤﻠﻛ ﻞــﺧدأو Wi-Fi ﺔﻜﺒــﺷ دﺪــﺣ
.ﻞﻌﻔﻟﺎﺑ ﺔــﺘﺑﺎﺛو ﺔــﻗﻼﻄﺑ يﺎــﻓ ياﻮﻟا ﺔــﻣﺪﺨﺑ ﻞــﺼﺘﻣ ﻚــﻔﺗﺎﻫ نأ ﻦــﻣ ﺪــﻛﺄﺗ
ناﱰﻗﻻا ﺔــﻘﻳﺮﻃ .4

AR
support@arenti.com
ﻚﻔﺗﺎﻫ ﲆــﻋ ﻖﻴﺒﻄﺘﻟا ﰲ ﺔــﻌﻳﴪﻟا ﺔﺑﺎﺠﺘــﺳﻻا ﺰــﻣر ﺢــﺴﳌ اــﻣﺎﻜﻟا مﺪﺨﺘــﺳاو "ﱄﺎــﺘﻟا" قﻮــﻓ ﺮــﻘﻧا
ﺔﻤﻐﻧ عــﺳ" قﻮﻓ ﺮﻘﻧا ،"dong dong dong" تﻮــﺼﻟا عــﺳ ﻢــﺘﻳ ﺎــﻣﺪﻨﻋو ،لﻮــﻤﺤﳌا
.ناﻮﺛ ﻊﻀﺒﺑ ﻚــﻟذ ﺪﻌﺑ ﺖــﺑﺎﺜﻟا قرزﻷا نﻮــﻠﻟﺎﺑ LED ﴍﺆــﻣ ﺢــﺒﺼﻳ ﻢــﺛ ،"تارﺎﻌــﺷﻹا
،ناﱰﻗﻻا ﺔــﻴﻠﻤﻋ ﺢــﺠﻨﺗ و زﺎــﻬﺟ يأ ﲆــﻋ رﻮــﺜﻌﻟا ﻢــﺘﻳ اذإ
:هﺎﻧدأ تــﻴﻠﻌﺘﻟا ﻦــﻣ ﻖــﻘﺤﺘﻟا ﻰــﺟﺮﻳ
ﺢــــــﺴﻣ
ﺔﺑﺎﺠﺘﺳﻻا ﺰﻣر
ﺔـــﻌﻳﴪﻟا
ﻖــﻴﺒﻄﺘﻟا ﻦﻣ
.ﻚﺑ ﺔﺻﺎﺨﻟا Wi-Fi ﺔﻜﺒــﺷ ﲆــﻋ ﺔﻜﺒــﺸﻟا طﺎــﺸﻧ ﻦــﻣ ﻖــﻘﺤﺗ .2
.ناﱰﻗﻹا ﻊﺿو ﰲ اــﻣﺎﻜﻟا نأ ﻦــﻣ ﺪــﻛﺄﺗ .3
ﻞﺼﺘﻣ لﻮــﻤﺤﳌا زﺎﻬﺠﻟا ﻚــﻟذو ﺎﻬﻟﺎﺧدإ ﻢــﺗ ﻲﺘﻟا Wi-Fi روﺮﻣ ﺔــﻤﻠﻛ ﺔــﺤﺻ ﻦــﻣ ﻖــﻘﺤﺗ .4
.Wi-Fi ﺔﻜﺒــﺷ ﺲﻔﻨﺑ
،ىﺮﺧأ ﻞﻛﺎــﺸﻣ يأ ﻚــﻳﺪﻟ وأ ﻞــﻤﻌﻳ اذإ
.ةﺪﻋﺎــﺴﳌا ﲆﻋ لﻮﺼﺤﻠﻟ support@arenti.com ـــﺑ لﺎــﺼﺗﻻا ﻰــﺟﺮﻳ
:ﻆﺣﻼﻳ
ﺎﻬﺘﻓﺎﺿﻹ ىﺮﺧأ ةﺮﻣ تاﻮﻄﺨﻟا عﺎﺒﺗا ﻰﺟﻓ ،تاﻣﺎﻛ ةﺪﻋ ﻚﻳﺪﻟ نﺎﻛ اذإ
.ﺮﺧﻵا ﻮﻠﺗ اﺪﺣاو ةﺰﻬﺟﻷا
،Wi-Fi ﺔﻜﺒﺷ ﻴﻐﺘﻟ
.اﻣﺎﻜﻟا ﺔﻓﺎﺿﻹ تاﻮﻄﺨﻟا ﻊﺒﺗاو تاداﺪﻋﻹا ﻊﻨﺼﻣ ﱃإ اﻣﺎﻜﻟا ةدﺎﻋإ ﻰﺟﺮﻳ
.ﺰﺗﺮﻫ ﺎــﺠﻴﺟ 2.4 ﲆﻋ Wi-Fi ﺔﻜﺒــﺷ ﻂــﺒﺿ ﻦــﻣ ﺪــﻛﺄﺗ .1

www.arenti.com
Direct current (DC)
AR
support@arenti.com
ﺞﺘﻨﳌا تﺎﻔﺻاﻮﻣ .5
ﺞﺘﻨﳌا ﻢﺳا
ﺔﻗﺪﻟا
ﺔﻳؤﺮﻟا ﺔﻳواز
ءاﺮﻤﺤﻟا ﺖﺤﺗ ﺔﻌﺷﻷا ﺔﻓﺎﺴﻣ
ﺔﻟﺎﻣإ/مﻮﻤﻋ
ﻞﻤﻌﻟا ةراﺮﺣ ﺔﺟرد
ﻦﻳﺰﺨﺘﻟا ﺔﻌﺳ
ﺔﻗﺎﻄﻟا ﻞﺧﺪﻣ
ﺔﻗﺎﻄﻟا كﻼﻬﺘﺳا
مﻮﻋﺪﳌا ﻒﺗﺎﻬﻟا ﻞﻴﻐﺸﺗ مﺎﻈﻧ
يﺎﻓ ياو ﺎﺠﻴﺟ 2.4
ﻮﻧﺎﻗ رﺎﻌــﺷإ .6
ﻢﻋ ﺪﻳ
ﺰﻣر وأ فﺮﺣ
تﺎــﻳﺎﻔﻨﻟا ﻊــﻣ ﺎــﻬﺘﻴﺣﻼﺻ ﺖــﻬﺘﻧا ﻲــﺘﻟا تﺎــﺠﺘﻨﳌا وأ تﺎــﻳرﺎﻄﺒﻟا ﻦــﻣ ﺺــﻠﺨﺘﺗ ﻻ
ﴬﺗ ﺪﻗ ﺎــﻬﻴﻠﻋ يﻮــﺘﺤﺗ نأ ﻞــﻤﺘﺤﳌا ﻦــﻣ ﻲــﺘﻟا ةﺮــﻄﺨﻟا داﻮــﳌاو .(ﺔــﻣﻘﻟا) ﺔــﻴﻟﺰﻨﳌا
وأ تﺎﺠﺘﻨﳌا ةدﺎﻌﺘــﺳا ﻚــﺑ صﺎــﺨﻟا ﺔــﺋﺰﺠﺘﻟا ﻊــﺋﺎﺑ ﻦــﻣ ﺐــﻠﻃا .ﺔــﺌﻴﺒﻟا وأ ﺔــﺤﺼﻟﺎﺑ
.ﻚــﺘﻨﻳﺪﻣ ﺎــﻬﺣﱰﻘﺗ ﻲــﺘﻟا ﺔــﻣﻘﻟا ﻦــﻣ ﺔــﻴﺋﺎﻘﺘﻧا ﺔــﻋﻮﻤﺠﻣ ماﺪﺨﺘــﺳا
ﻊﻣ ﻖﻓاﻮﺘﻳ "G01" ﻮــﻳداﺮﻟا زﺎــﻬﺟ عﻮﻧ نأ ﻦــﻠﻌﻧ ،اﺬــﻫ ﺐــﺟﻮ
EU/2014/53 ﻪــﻴﺟﻮﺘﻟا
ناﻮﻨﻋ ﲆﻋ وروﻷا دﺎــﺤﺗﻼﻟ ﺔــﻘﺑﺎﻄﳌا نﻼــﻋﻹ ﻞــﻣﺎﻜﻟا رﺎــﺒﺘﺧﻻا ﺮــﻓﻮﺘﻳ
:ﱄﺎﺘﻟا ﺖــﻧﱰﻧﻹا
www.arenti.com
G01
1080 × 1920
135°
م 10 ﱃإ ﻞﺼﻳ
(ﺔﻟﺎﻣإ) 78°~-15° ؛(ةﻼﻘﻣ) 355°~0°
ﺔﻳﻮﺌﻣ ﺔﺟرد 50 ﱃإ ﺔﻳﻮﺌﻣ ﺔﺟرد -20
(ﺖﻳﺎﺑﺎﺠﻴﺟ 128 ﱃإ ﻞﺼﺗ) يد سا وﺮﻜﻳﺎﻣ ﺔﻗﺎﻄﺑ
ﺒﻣأ 1 ،ﺖﻟﻮﻓ 5 ﺮﻤﺘﺴﻣ رﺎﻴﺗ
طاو 3 ﱃإ ﻞﺼﻳ ﺎﻣ
ثﺪﺣﻷا تاراﺪﺻﻹاو 5.0 ﺪﻳورﺪﻧأ / iOS 9
ﺰــﺗﻫﺎﻐﻴﻣ 2412-2472
(طاو ﲇﻴﻣ ﻞﺒﻴــﺴﻳد 20 ﻦــﻣ ﻞــﻗأ ىﻮــﺼﻘﻟا ﺔــﻗﺎﻄﻟا)

FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.

Safety Information
Power Adapter Safety:
1.The power plug is intended to serve as a disconnect device.Do not drop or
cause an impact to the power adapter.
2.If the power cable is damaged (for example, the cord is exposed or broken),
or the plug loosens,stop using it at once. Continued use may lead to electric
shocks, short circuits, or fire.
3.Do not touch the device or the power adapter with wet hands. Doing so may
lead to short circuits, malfunctions, or electric shocks.
Child's safety
1. Comply with all precautions with regard to child's safety. Letting children
play with the device or itsaccessories may be dangerous.
2. The device and its accessories are not intended for use by children. Children
should only use the device with adult supervision.
Operation safety
1. Use the device under allowed humidity and temperature conditions.
2. Do not aim the device at strong light sources (such as lamplight, and
sunlight) when focusing it,to avoid reducing the lifespan of the CMOS sensor,
and causing overbrightness and flickering.
3. Observe local laws and regulations, and respect the privacy and legal rights
of others.
V1.0 202309
© 2023. All rights reserved. All trade names are registered trademarks of
respective companies Apple, the Apple logo, iPhone are trademarks of Apple
Inc. registered in the U.S. and other countries. Google, the Google logo,
Android are trademarks of Google Inc. App Store is a service mark of Apple
Inc. Google Play is a service mark of Google Inc.
Other manuals for GO1
1
This manual suits for next models
1
Table of contents
Other Arenti Security Camera manuals