Arestech BPC-3030 User manual

BPC-3030 User Manual V1.0
User Manual
BPC-3030
Compact Size fanless Box PC solution
withIntel® Bay Trail-D J1900 CPU

BPC-3030 User Manual V1.0
Copyright
The documentation and the software included with this product are copyrighted 2014
by Arestech Co., Ltd. All rights are reserved. Arestech Co., Ltd. reserves the rightto
make improvements in the products described in this manual at any time
withoutnotice. No part of this manual may be reproduced, copied, translated or
transmittedin any form or by any means without the prior written permission of
Arestech Co.,Ltd. Information provided in this manual is intended to be accurate and
reliable. However,Arestech Co., Ltd. assumes no responsibility for its use, nor for any
infringementsof the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty
Arestech warrants to you, the original purchaser, that each of its products will befree
from defects in materials and workmanship for two years from the date of
purchase.This warranty does not apply to any products which have been repaired or
altered bypersons other than repair personnel authorized by Arestech, or which have
beensubject to misuse, abuse, accident or improper installation. Arestech assumes
noliability under the terms of this warranty as a consequence of such events.Because
of Arestech’s high quality-control standards and rigorous testing, most ofour
customers never need to use our repair service. If an Arestech product is defective,it
will be repaired or replaced at no charge during the warranty period. For
outof-warranty repairs, you will be billed according to the cost of replacement
materials,service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example,
CPUspeed, Arestech products used, other hardware and software used, etc.)
Noteanything abnormal and list any onscreen messages you get when the
problemoccurs.
2. Call your dealer and describe the problem. Please have your manual,
product,and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandizeauthorization) number from your dealer. This allows us to process

BPC-3030 User Manual V1.0
your returnmore quickly.
4. Carefully pack the defective product, a fully-completed Repair and
ReplacementOrder Card and a photocopy proof of purchase date (such as your
sales receipt)in a shippable container. A product returned without proof of the
purchase dateis not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaidto
your dealer.

BPC-3030 User Manual V1.0
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a dampcloth.
Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the
equipmentand must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or lettingit
fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipmentfrom
overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting
theequipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place
anythingover the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power
sourceto avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should beopened
only by qualified service personnel.
If one of the following situations arises, get the equipment checked by service
personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to
the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE
THESTORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE
60° C(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE
EQUIPMENTSHOULD BE IN A CONTROLLED ENVIRONMENT.
15. CAUTION: DANGER OF EXPLOSION IF BATTERY IS

BPC-3030 User Manual V1.0
INCORRECTLYREPLACED. REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPERECOMMENDED BY THE MANUFACTURER, DISCARD
USED BATTERIESACCORDING TO THE MANUFACTURER'S
INSTRUCTIONS.
Safty Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from your PC chassis
before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.
Disconnect power before making any configuration changes. The sudden rush
of power as you connect a jumper or install a card may damage sensitive
electroniccomponents.

BPC-3030 User Manual V1.0
Contents
Chapter 1: General Introduction
Overview..................................................................................................................1
Key Features............................................................................................................2
Hardware Specification.............................................................................................2
Front & Rear Panel Arrangement.............................................................................3
Mechanical Dimensions.............................................................................................4
Power Requirement...................................................................................................5
Environment Specification.........................................................................................5
Chapter 2: Connector(PIN-Definition).........................................................................6
Part1. External Interface(Front)................................................................................6
Power Input(9~36V DC).........................................................................................6
COM Ports...........................................................................................................6
-COM1Port(RS-232).......................................................................................7
-COM1Port(RS-422)............................................................................7
-COM1 Port(RS-485)............................................................................7
-COM2 to COM4 Ports(RS232)........................................................................7
-COM5 to COM8 Ports(RS-232).....................................................................8
-COM5 to COM8 Ports(RS422/485 FULL DUPLEX)............................................8
-COM5 to COM8 Ports (RS485 HALF DUPLEX)...............................................8
Part2.External Interface(Rear)..................................................................................9
Audio Ports............................................................................................................9
USB Ports(USB2.0)................................................................................................9
USB Ports(USB3.0).............................................................................................10
HDMI Ports .......................................................................................................10
VGA Port..............................................................................................................11
LAN Ports............................................................................................................11
-Pin Definition.......................................................................................11
-LAN Port LED Indications...............................................................................12
Part3. Internal Interface..........................................................................................13
SATA Connector....................................................................................................13
SATA Power Connector.........................................................................................13
Chapter 3: System Installation...................................................................................14
Installation Procedures............................................................................................14

BPC-3030 User Manual V1.0
Installing HDD/SSD..........................................................................................15
Installing USB dongle inside the Box-PC.................................................................17
Set up com5~8(RS-232/422/485)......................................................................19
Chapter 4 : BIOS Setting..............................................................................................21
Part1.Main..............................................................................................................22
Part2.Advanced......................................................................................................23
Part3.H/W Monitor.................................................................................................32
Part4.Security.......................................................................................................33
Part5.Boot...............................................................................................................34
Part6.Exit..............................................................................................................36

BPC-3030 User Manual V1.0
Page 1
Chapter1.General Introduction
Overview:
The BPC-3030 fanless Box PC is ideal for embedded and automation applications.
This embedded hardware platform is designed with the Intel®Celeron® J1900
processor. This processor runs at 2GHz and supports DDR3L-1333SDRAM
while maintaining low power consumption and attractive price point. The most
feature of BPC-3030 is that it supports up to 8 COM ports while maintaining
compact mechanical size. BPC-3030 also has a rugged case designed to protect
against electromagnetic interference, extremes of cold and heat, and highlights
a passive cooling design for quiet, fanless operation ideal for the Digital Signage,
Medical and automation industries.

BPC-3030 User Manual V1.0
Page 2
Key Features:
(1) Intel® Celeron® J1900 (2M Cache, 2.0 GHz)
(2) DDR3L 1333 MHz SODIMM up to 8 GB
(3) 2 x GigaLAN
(4) 8 x COM Ports
(Standard: 1x RS-232/422/485 ,7xRS-232
Maxima:5x RS-232/422/485,3x RS-232)
(5) 2 x USB3.0, 2 x USB2.0 , 1xInternal USB for Keypro
(6) HDMI& VGA (Dual Display)
(7) Line out
(8) 1 x Mini PCIe (Half size)
(9) Support 1 x 2.5” SATA HDD/SSD
(10) 9~36V DC Input (Phoenix connector), Lockable
(11) -20~60° COperation Temperature
Hardware Specification:
Model BPC-3030
Processor
System
CPU Intel® Celeron® Processor J1900
Frequency Quad-Core 2.0 GHz
L2 Cache 2 MB
System Chipset N/A
BIOS UEFI
Memory Technology DDR3L 1333 MHz SDRAM
Max. Capacity 8 GB
Socket 1 x 204-pin SODIMM
Display Graphics Engine Intel® Gen7 Intel Graphics DX 11*, OGL3.2
VGA Up to 1920 x 1200
HDMI Supports HDMI 1.4a, max resolution 1920 x 1200
Dual Display VGA + HDMI
I/O Interface USB 2 x USB 3.0 , 2 x USB 2.0 , 1 x internal USB (keypro)
Serial Port 8 x COM (7 x RS-232, 1 x RS-232/422/485)
Antenna Hole 2 x Antenna Holes (for SMA connector)
Expansion Mini PCIe 1 x Half-size Mini PCIe
Ethernet Controller Dual GbE, 10/100/1000MbpsRealtek RTL8111G-CG
Audio Chipset Realtek ALC662 High Definition Audio (HD)

BPC-3030 User Manual V1.0
Page 3
Connectors Line out
Storage SATA 1 x SATA II (Max. Data Transfer Rate 300 MB/s)
Power Power Input 9~36 V DC-input
Power Consumption 0.783A@12V(9.4W)
Power Adaptor AC-to-DC, 12 V @ 5 A, 60 W
Environment Operational -20~ 60° C (-4~ 139° F) w/ 2.5" HDD
(Operational humidity: 50° C @ 95% RH Non-Condensing)
Certificate EMC CE, FCC Class A
Physical
Characteristics
Dimensions 238(W) x 55(H) x 165(D) mm (9.37” x 2.16” x 6.5”)
Weight 1.8 Kg
Front & Rear Panel Arrangement:
COM Ports
Power Button
Power Input
LAN Ports VGA Port USB Ports (2.0)
USB Ports (3.0)
HDMI PortLine Out Antenna HoleAntenna Hole

BPC-3030 User Manual V1.0
Page 4
Mechanical Dimensions:

BPC-3030 User Manual V1.0
Page 5
Power Requirement:
Power Input: support 9~36V DC Input
Power adaptor:12V@5A,60W
Environment Specification:
(1) Operating Temperature: 0~50° C (32~140° F)w/ 2.5” HDD
(2) Operational humidity: 50° C @ 95% RH Non-condensing

BPC-3030 User Manual V1.0
Page 6
Chapter2.Connector(Pin-Definition)
Part1.ExternalInterface(Front):
Power Input(9~36V DC):
Pin Definition
1 GND
2 Vin+ (9~36V DC)
COM Ports:
Default: RS232 for COM1 to COM8
Option:RS232/422/485 for COM1
(NOTE: The parameter for COM1 can be set by BIOS setup utility)
RS232 for COM2 to COM4
RS232/RS422/RS485 for COM5 to COM 8
(NOTE: RS232/RS422/RS485 for COM5 to COM8are optional kits for sales)
1
2

BPC-3030 User Manual V1.0
Page 7
- COM1 Port(RS-232):
Pin Definition Pin Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 N/A
5 GND
- COM1 Port(RS-422):
Pin Definition Pin Definition
1 TX- 6 N/A
2 RX+ 7 N/A
3 TX+ 8 N/A
4 RX- 9 N/A
5 GND
-COM1 Port(RS-485):
Pin Definition Pin Definition
1 RTX- 6 N/A
2 N/A 7 N/A
3 RTX+ 8 N/A
4 N/A 9 N/A
5 GND
NOTE: Please refer to Chapter4 BIOS Setting - 2.5.1 COM1 Configuration (page)
Pin
to
set parameters of COM1
-COM2 to COM 4Ports(RS-232):
Definition Pin Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
5
9
1
6

BPC-3030 User Manual V1.0
Page 8
4 DTR 9 N/A
5 GND
- COM 5 to COM 8 Ports(RS-232):
Pin Definition Pin Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 GND
- COM 5 to COM 8 Ports (RS-422/485 FULL DUPLEX):
Pin Definition Pin Definition
1 TX- 6 N/A
2 TX+ 7 N/A
3 RX+ 8 N/A
4 RX- 9 N/A
5 GND
- COM5 to COM 8 Ports (RS485 HALF DUPLEX):
Pin Definition Pin Definition
1 DATA- 6 N/A
2 DATA+ 7 N/A
3 N/A 8 N/A
4 N/A 9 N/A
5 GND

BPC-3030 User Manual V1.0
Page 9
Part2.External Interface(Rear):
Audio Ports:
Pin Definition
Green Line_Out
USB Ports(USB2.0):
Pin Definition
1 +5
2 USB-
3 USB+
4 GND
41

BPC-3030 User Manual V1.0
Page 10
USB Ports(USB3.0):
Pin Definition
1 +5
2 USB-
3 USB+
4 GND
5 StdA_SSRX-
6 StdA_SSRX+
7 GND_DRAIN
8 StdA_SSTX-
9 StdA_SSTX+
HDMI Ports:
Pin Definition Pin Definition
1 TMDS Data2+ 2 TMDS Data2 Shield
3 TMDS Data2 - 4 TMDS Data1+
5 TMDS Data1 Shield 6 TMDS Data1-
7 TMDS Data0+ 8 TMDS Data0 Shield
9 TMDS Data0- 10 TMDS Clock+
4 1
5 9

BPC-3030 User Manual V1.0
Page 11
11 TMDS Clock Shield 12 TMDS Clock-
13 Reserved 14 Reserved
15 SCL 16 SDA
17 DDCGround 18 +5 V Power
19 Hot Plug Detect
VGA Ports:
Pin Definition Pin Definition
1 RED 9 VCC
2 GREEN 10 GND
3 BLUE 11 NC
4 NC 12 DAT
5 GND 13 HSYNC
6 GND 14 VSYNC
7 GND 15 CLK
8 GND
LAN Ports:
- Pin Definition:
10/100BASE-T:
Pin Definition Pin Definition
1 TX_D0+ 5 NC
2 TX_D0- 6 RX_D1-
5
15
1
11
18

BPC-3030 User Manual V1.0
Page 12
3 RX_D1+ 7 NC
4 NC 8 NC
1000BASE-T:
Pin Definition Pin Definition
1 TX_D0+ 5 BI_D2-
2 TX_D0- 6 RX_D1-
3 RX_D1+ 7 BI_D3+
4 BI_D2+ 8 BI_D3-
- LAN Port LED Indications:
Activity/Link LED
Status Description
Off No Link
Blinking Data Activity
On Link
SPEED LED
Status Description
Off 10Mbps connection
Off 100Mbps connection
Green 1Gbps connection

BPC-3030 User Manual V1.0
Page 13
Part3.Internal Interface:
SATA Connector:
Pin Definition
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
SATA Power Connector:
Pin Definition
1 +5V
2 GND
3 GND
4 +12V