argon audio BT2 MK2 User manual

www.argonaudio.com
BT2 MK2Quick start
We care about the Environment
By refraining from inserting a full printed manual with our Argon Audio
products we save more than 20 tons of paper each year. You can find
a full User Manual in PDF format for this product on;
www.argonaudio.com
See back side of this insert for Quick start guide
Safety
Safety Instructions
•Unplug this product from the wall outlet before cleaning. Do
not use this product near water or moisture. Do not spill
liquids on the product. Clean only with a dry cloth.
•Place the unit on a solid surface.
•Do not put it in a closed bookcase or a cabinet that may keep
air from flowing through its ventilation openings.
•Do not install near any heat sources, such as radiators, heat
registers, stoves or other appliances that produce heat.
•Protect the power cord from being walked on or pinched,
particularly at plugs and the point where they exit from the
product.
•During Lightning storms, unplug the product from the power
source or if unused for long periods of time. This will prevent
lightning and power-line surge damage to the product.
•Do not attempt to service this product yourself. Opening or
removing covers may expose you to dangerous voltages or
other hazards. Please contact the manufacturer to be referred
to an authorized service center near you.
•Do not overload wall outlets, extension cords, or integral
power circuits as this can result in a risk of fire or electric
shock.
•Never push any object through the product openings, as this
can result in fire, electric shock or damage.
•Use proper power sources. Plug the product into a proper
power source, as described in the operating instructions or as
marked on the product.
If there is a Lightning flash with an arrow head
on the product, it’s intended to alert the User
of the presence of un-insulated “dangerous
voltage” within the product, that might be of
sufficient magnitude to constitute a risk of
electric shock to persons.
If there is an Exclamation point on the
product, it’s intended to alert the User that
there is important operating and maintenance
(servicing) information in the User manual.

www.argonaudio.com
BT2 MK2Quick start
Quick start
1. Connect the power supply to the Argon Audio
BT2 and connect the power supply to a power
outlet.
2. Connect the BT2 to an Amplifier, using either the
(included) RCA cable, a mini jack cable or an
optical cable.
3. The small LED light on the front of Argon Audio
BT2 will turn Red, indicating its in Stand-by mode
4. Enable Bluetooth on your playback device
(Mobile Phone, Tablet, Lap Top etc.).
5. Turn ON Argon Audio BT2, by pressing the
Power button on the back.
6. The LED on the front of Argon Audio BT2 will turn
Blue and start blinking fast. Now waiting to
connect to a BT device. (Mobile Phone, Tablet,
Lap Top etc.)
7. Start Bluetooth device search on your playback
device (Mobile Phone, Tablet, Lap Top etc.).
8. Once “Argon Audio BT2” is found and shows in
the display of your device – depending on your
device, it either:
a. Connects automatically indicating
“Connected to Media Audio” or.
b. “Ask” to be Paired
9. If it shows “Connected to Media Audio” you are
ready for playback.
10. If it ask to be Paired press “Argon Audio BT2 on
your device and it will show “Paired”.
11. Then Press “Argon Audio BT2” on your device
again and it will Connect.
12. Notice you can adjust the volume both on your
playback device (Mobile Phone, Tablet, Lap Top
etc.). and on your Amplifier.
LED light indicator
No light = Off
Red = Stand-by
Fast Blinking Blue = Waiting for
Pairing/Connect
Slow Blinking Blue = Time out for
connection.
To activate again, press Power twice until
you either get fast blinking Blue or Constant
Blue LED
Constant Blue = Connected