Argos Home 634/4557 D User manual

TC Facet Towel Rail
Assembly Instructions
– Please keep for future reference 634 / 4557 D
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Warning: To prevent breakage - Do Not press on to the glass back plate too hard when
assembling.
Issue 1–06/10/16

1
Safety and Care Advice
Important –Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Dispose of all packaging carefully
and responsibly.
Warning: To prevent breakage -
Do Not press on to the glass back
plate too hard when assembling.
• • •
•
•
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Glass safety– Take care when handling glass, please follow the advice below
• If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
• Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
• Do not strike the glass with
hard or pointed items.
• When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
• Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.
• D
•

2
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Tools required
Allen Key
(Provided)
Components - Parts
Please check you have all the parts listed below
Components- FittingsIf you have damaged or missing components,
call the Customer Helpline: 08456 400800
Please check you have all the fittings listed below
Wall Plug
x
4
Screw
x
4
A
B
1Towel rail
Washer
x
2
C

3
WALL
Assembly Instructions
Step
1
Decide upon position of
items.
Vertically position the flat
side of the metal wall
plate on the wall. Mark
screw fixing hole
positions as required.
Step
2
Before drilling check for any
hidden pipes and cables.
Drill holes (6mm diameter
x 40mm deep) at the
positions marked and
push in the wall plugs
provided. Secure the
back plate to the wall
using the 2 screws .
Ensure it is level before
fully tightening.
Ensure screw heads are
flush with wall plate.
Step
3
Peel off the pad cover
and stick the Glass back
plate over the back plate
ensuring it is straight and
central.
WALL
WALL
A
A
Ensure gap in pin is on underside.
B
B
Note: Ensure
gap in pin is
on underside.

4
Assembly Instructions
Step
4
Loosen the grub screw
as shown.
Place the washer &
metal part over the back
plate. Secure by
tightening the grub screw
as shown.
Note: To
prevent
breakage - Do
Not press on to the glass
back plate too hard when
assembling.
Note: The
wall fixing
step is for
securing the product to a
wall and should only be
attempted by
experienced persons.
Note: The
fixings
described are
for use with solid
masonry walls only.
Alternative fixings should
be purchased if you have
a different wall
construction.
Assembly is complete.
WALL
C
A
C
If you need help or have damaged or missing parts, call the Customer Help Line: 08456 400800
Home Retail Group plc. Avebury, 489-499 Avebury Boulevard. Milton Keynes. MK9 2NW