Argos OPTI 7607035 Owner's manual

Assembly & User Instructions - Please keep for future reference 619/3124
OPTI TWIN FLEXI FOOTBALL GOAL
Important – Please read these instructions fully before assembly or using
These instructions contain important information which will help you get the best from your
equipment and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline:0345 6402020
Issue 1 9/26/16
H - Football x 1
G - Pump x 1
D - Frame Tubes x 12
E - Elbow Connector x 4
F - Ground Peg x 6
C - Straight Connector x 8
A - Net x 2
B - Velcro Strap x 2
C
CD
D
1
Join 3 frame tubes ( D) together using 2
Straight Connectors (C). Do this twice so
you have two long poles as shown.
Note: If the connector joints are tight,
lubricate with washing-up liquid.
DD
C
D
) into each of the fabric edging of the net (A).
D
2Slide a set of frame tubes (D & C
A
To be assembled & dismantled by an adult.
To be used on a at surface.fl
Check all joints are rmly tight and the fi
frame assembly is securely pegged to
ground before use.
Do not leave outdoors in adverse weather
conditions.
Do not climb or hang from cross bar.
Check regularly for wear and tear.
Discontinue use if any breakage is found.
Failure to do this may result in injury.
Keep away from re.fi
Keep away from heat sources.
Assemble Instructions

Assemble Instructions
Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
22
Made in China
B - Velcro Strap x 2
I - Pump x 1
3 4
Insert the elbow connectors (E) into one frame tube,
ensuring the strap holes face the same way and will be
parallel to the oor after construction.fl
Place one end of the goal on a clean rm surface. Holding the fi
top of the frame tubes, push downwards slowly. The frame tubes
will bow, allowing you to push together the elbow connector at
the top of the goals.
Turn the goal over and repeat.
D
D
EE
D
E
5
6
To connect the velcro strap (B), loop through the holes on
the elbow connector and attach to the connecting velcro
section on the strap. Place the connected end on a clean,
firm surface. Carefully bend the goal and repeat on other
end of the goal.
Note: To secure frame rmly to ground always anchor one peg at fi
each anchor point as indicated.
Caution:
Check regularly that pegs are secure.
Loose pegs may cause injury.
Care should be taken when using a mallet as misuse may cause injury.
When assembled the goal is under tension. Extreme care must be
taken when disassembling.
Position the assembled goals in place and x to the ground fi
using the 3 ground pegs (F ) per goal.
B
F