SPORTSFIELD SPECIALTIES SG824RINT Quick start guide

1 of 9 08/13/2020
International Soccer Goal with
Front Post Ground Sleeves Installation Notes
SG824RINT (SG4950INT)

2 of 9 08/13/2020
Hardware Parts List:
Part Number
Description
QTY.
Per
Bag
111-FLW1/2-GALV
1/2" Galv. Flat Washer
12
110-FLW1/4-SS
1/4'' S.S. Flat Washer
6
110-SLW1/4-SS
1/4" S.S. Lock Washer
6
101-HHC1/2-13X1.25-SS
1/2-13 X 1.250" Long S.S. Hex Bolt
8
101-HHC1/2-13X4-SS
1/2-13 X 4" Long S.S. Hex Bolt
2
114-NYL1/2X1.5X.125FLW
1/2'' ID x 1-1/2'' OD x 1/8'' thick, nylon flat
washer
4
107-HXN1/2-13NYLOCK-SS
1/2-13 nylock nut, SS
2
100-EYE5/16-18X3-STL-CE
Eye Bolt 5/16-18x3'' partially threaded zinc
3
107-HXN5/16-18-SS
5/16-18 hex nuts, SS
3
107-HXN5/16-18ACORN-SS
5/16-18 acorn nut
3
ROPE CLEAT
Rope Cleat for pole
3
101-HHC1/4-20X3-SS
1/4-20 x 3'' Hex Head Bolt, SS
6
107-HXN1/4-20ACORN-HC-SS
1/4-20 acorn nut, SS
6
107-HXN1/4-18-SS
1/4-20 hex nuts, SS
6
SG-GN-WCBOX
White Soccer 'Box' Net, 8'H x 24'W x 6'B x 6'D
1
114-9489T18
1/4-20 Open Eye Bolt with 1 1/2" Shank
2
CUSTOM TETHER
Custom Tether 35-1/2' long (looped both ends)
1
CUSTOM TETHER
Custom Tether 15' long (looped one end)
3
114-GS-02-CAP
2" Ground Sleeve Cap
3
113-209860
516'' Spring hook for nets
5
100-HWH3/8-16X1-SER-CS/BP
3/8-16 X1" SER SS HH Bolt
8
114-VVRT19-1P018
Round Tubing Plugs, Fits 2-3/8''OD tube.
3
1. Start by laying out the ground sleeves according to the layout, orientate parallel to
the field end line (Fig. 1). Each rear ground sleeve comes with 3/8” x 3-1/2” long
hex bolt and 3/8” nyloc nut as shown (Fig. 2 & 3). Each of the front ground
sleeves comes as shown (Fig. 4), the flat edge is to face the field. Excavate holes
for the footings and set the concrete forms. Exact footing requirements will vary
based on local building codes and site specific soils reports.
Figure 1

3 of 9 08/13/2020
Figure 2 Figure 3 Figure 4
2. Center the ground sleeve in the form and secure it in a plumb and level position. The
top of the ground sleeve should be flush with the finish grade.
Figure 5A Figure 5B
3. After unwrapping and laying out all parts. Begin by assembling the front top bar to the
end upright frames. Lay out the front top bar along with the right and left end frames,
making sure that the clips are facing out (Fig. 5).

4 of 9 08/13/2020
4.Using (2) 3/8” – 16 x 1” serrated flange Hex Bolt, attach the Top Bar Channel to the
inside of both ends of the Right and Left End Frames (Fig. 5). Note: Do not tighten
hardware until all bolts are in place.
Figure 6A Figure 6B
5. Connect the end frames to the crossbar by sliding the crossbar over the channel (Fig.
6A). Make sure all net clips are facing toward the outside of the goal. Using (2) 3/8” –
16 x 1” serrated flange Hex Bolt, secure the Crossbar to each end frame (Fig. 6). All
Bolts can now be tightened.
Figure 8A Figure 8B
6. Lower the soccer frame into the ground sleeves as shown (Fig 8).

5 of 9 08/13/2020
Figure 9A Figure 9B
7.Attach the ground bar to the uprights using (1) ½”-13 x 4” bolts, (2) ½” flat washers,
(2) ½” flat nylon washers, and (2) ½” Hex Nuts, for each upright as shown (Fig 9).
Figure 10
8. With the goal frame now fully assembled, attach the net to the goal. The top corner of
the soccer goal is where the Crossbar meets the Upright. On either side, begin by
attaching the net to the clips along the goal. The net is attached by first pushing the outer
binding through the clip, then securing in the groove (Fig. 10). Move along the Crossbar
attaching the net to every clip. Next, work down both uprights and the back around the
Ground Bar.

6 of 9 08/13/2020
Figure 11A Figure 11B
9. Included in the hardware kit is a 34’ tether that hooks to the upright and runs around
the top of the net. The tether is to be woven through the binding of the net as shown (Fig.
11).

7 of 9 08/13/2020


































































































































































Standard Installation Complete
SEE NEXT PAGE FOR VALUABLE SAFETY TIPS RELATED TO
SOCCER GOALS
Outside of Goal
Figure 6

8 of 9 08/13/2020
Soccer Goal Safety Tips
* Remove nets when goals are not in use.
* Verify structural integrity and check for secure connecting hardware before every use.
Replace damaged or missing parts and/or fasteners immediately.
* NEVER allow anyone to climb on the net or goal framework.
* Ensure safety/warning labels are clearly visible (placed under the crossbar and on the
sides of the front-posts at eye level).
* Fully disassemble goals for seasonal storage.
* Exercise extreme caution and provide adequate manpower when moving goals. Only
authorized and properly trained personnel should move soccer goals.

9 of 9 08/13/2020
REPLACEMENT PARTS
Contact Sportsfield Specialties Customer Service at 1-888-975-3343 for replacement
hardware.
Sportsfield Specialties, Inc.
P.O. Box 231
41155 State Highway 10
Delhi, N.Y. 13753
Phone: [phone]
Fax: [phone]
www.sportsfieldspecialties.com