Argox PA-20 User manual

Depending on the configuration ordered, the PA-20 shipping container
may include:
To attach the hand strap
1. Fix the small cord of the strap around the pillar of the terminal.
(Figure 1)
Insert the handle of the strap in the thin loop. (Figure 2)
2. The strap is fixed to the terminal. Hold the hand strap around the
wrist when carrying the terminal
http;//www.argox.com
See User Manual for more information
Battery pack
Hand strap
strap
Power plug
PA-20
Power supply
Quick Reference
Guide
CD ROM
PA-20 Mobile Computer
Quick Start Guide
Feature
Screen
Scan Button
Reset Button
Battery Cover Latch
Scan Window
Buzzer
Battery Cover
Connector
Power Button
Figure1
Figure2
First time initiation of this product; please make
sure to charge the main battery for at least 16 hours
to ensure a proper charge.
！

1. Turn the screw
2. Open the cover
Be sure to turn the terminal off before you do this
Install or replace the main battery in the terminal
Install or replace the main battery in the gun grip
1. Slide the main battery compartment cover lock to the
FREE position and remove the cover
2. Load a Li-Polymer battery pack into the main battery
compartment in the direction shown in the figure
3. Attach the battery compartment cover to the
terminal and slide the main battery compartment
cover lock to the LOCK position.
Charging the Battery
Spare Battery
Charge LED
49-PA201-001 Rev. A –Apr,2013
Red = Normal charge / Green = Full Charge
Keypad and function button
1
2
3
5
6
4
7
1. Scan key
2. Cursor key
3. 10-key pad
4. Enter key
5. Power key
6. ESC key
7. Reset
SFT key
Switches between the character input mode and the number
input mode [abc][ABC] lit on the LCD screen indicates the
character input mode.When [123] is lit, the terminal is in the
number input mode.
Function key
F1 (-): Inputs the minus (-) sign
F2 (SP): Inputs a space
F3 (DEL): Deletes a character
F4 (BL): Turns the key lights ON and OFF
F5 ( ): Press Power Key first and press F5 next to
increases buzzer volume
F6 ( ): Press Power Key first and press F6 next to
increases LCD backlight
P1: press Power Key first and press P1 next to decrease
Buzzer volume and program 1 (for user SDK define)
P2: press Power Key first and press P2 next to decrease
LCD backlight and program 2 (for user SDK define)
Single slot Serial / USB Cradle
Charge LED
Press mobile computer
firmly into cradle