Arista U-Shape Safety Assist Bar User manual

(Faucet not included)
Bathroom Hardware
U-Shape Safety Assist Bar Installation Guide
Place U-Shape Bar at
desired location on wall.
Step 1
(Faucet not included)
Use pen to mark the
positions of the four
mounting brackets on wall.
1
2
3
4
1
2
3
4
(Faucet not included)
Use pen to mark the
positions of the four
mounting brackets on wall.

Unscrew the Set Screw to
detach the mounting plate
from each Bracket.
Set Screw
Mounting
plate
Place the Mounting Plate
on each marked position to
mark the screw hole
locations on wall
(Faucet not included) (Faucet not included)
Place the Mounting Plate
on each marked position to
mark the screw hole
locations on wall
1
3
1
3
2
4
2
4
Step 2

Drill holes at the
marked screw locations.
Step 3
(Faucet not included)
Drill holes at the
marked screw locations.
(Faucet not included)
1
3
2
4
1
3
2
4
On ceramic tiles, try to locate
screw holes on grout line.

(Faucet not included)
1
3
2
4
Push anchors into
screw holes until
flush with wall.
Anchor
Step 4
(Faucet not included)
1
3
2
4
Screw mounting
plate on wall with
screws provided. Screw mounting plate on
wall with screws provided.
1
3
2
4
(Faucet not included)

At last, mount &
lock the U-Shape
Bar to the
mounting plates
on wall.
(Faucet not included)
Step 5
Mount & lock with
Set Screws.
(Faucet not included) (Faucet not included)
Finish !
To check secure mounting, pull the
U-Shape Bar slightly.
If not mounted properly, unscrew Set
Screws and then, repeat step #5.