Arkon SM212 User manual

Package Contents:
(1) CM012 - Weighted “friction style” dash mount
(1) CM014-2 - Travelmount® mini windshield mount
(1) SM020-2 - Universal mobile phone cradle / holder
(1) Optional adhesive safety hook (recommended but not required)
(1) Alcohol cleaning pad
Compatible with:
• Most mobile phones
!Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
Do not place mount in or near an air bag deployment zone or
where it will obstruct view of the road.
!
Dash Mount Installation
Find a safe location on the vehicle dash that is not in an air
bag deployment zone.
Optional Safety hook installation will add extra stability.
Clean the area with the included alcohol pad and let dry.
Remove the adhesive backing on the safety hook base. The
hook curve must point towards the windshield. Press and
hold the hook down on the dash surface for about a minute.
Allow 24 hrs. to cure to the dash at room temperature (72° F).
Place the loop on the back of the dash mount around the
safety hook and place on the dash in front of the hook.
Lower the pedestal onto the disc and press down rmly. Flip the
locking lever down to secure the pedestal to the dash mount.
Adjust the angle of the arm by tightening the rotation knob.
Adjust the lateral angle of the pedestal head by tightening the
head adjustment knob. Attach a dual T cradle or device to the
dual T-tabs. (Device not included, sold separately.)
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
AIRBAG
W
I
N
D
S
H
I
E
L
D
Hook towards windshield
SM212
|Deluxe Weighted “Friction Style” Mobile Phone Dash Mount
Patent Pending
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2008 Arkon Resources, Inc.
Weighted “Friction Style”
Dash Mount with Pedestal
SM020-2
Universal
Cradle
Adhesive
Safety Hook

!Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9 am - 5 pm, PST
Universal Cradle Attachment
Device Attachment and Universal Cradle Adjustment
Attach the cradle to the dual T-tab head by inserting the T-tabs
into the T-slots.
If necessary, adjust the support legs (A) by sliding them
laterally. These provide support for your device.
Place device on the support legs (A) and squeeze the side grip
arms (B) until they t securely to the device.
Push the release button (C) in order to release the device from
the cradle.
Step 1.
Step 1.
Step 2.
Step 3.
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2008 Arkon Resources, Inc.
(A) Support
legs
(C) Release
Button
(B) Side-Grip
Arms
SM212
|Deluxe Weighted “Friction Style” Mobile Phone Dash Mount