Arkon BBP133 User manual

CM019-KST-2
CM019-KST-2
PTM133 & BBP133 7" Windshield Suction Mount
Consumer Hotline:
(USA) [phone]
(INT'L) [phone]
Mon-Fri. 9am-5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
© Copyright 2007 Arkon Resources, Inc.
The Mobile Mounting Specialists
TM
CC003-BBP
Compatability:
-Blackberry Pearl 8100
BBP133
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no
responsibility of liability for injury or death as a result of car crashes
and/or air bag deployment.
Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of the
pedestal mount.
Step 1.
Step 2.
Step 3.
Adjust the angle of the arm by loosening the adjustment
knobs (D).
Adjust the angle and rotation of the pedestal head by
loosening the swivel-tightening knob (E).
Attach the device cradle to the dual-T tab head (F) by
inserting the T-tabs into the T-slots (G).
Pedestal and Dual-T Head Instructions
Compatability: (not complete)
-Palm Treo 650
-Palm Treo 680
-Palm Treo 700W
-Palm Treo 700P
-Palm Treo 750
-HP iPAQ 6815
-HP iPAQ 6818
-HP iPAQ 6828
-HTC P3600
-HTC Neo
-XDA Atom Exec
-Dopod 818 Pro
-Dopod 810
-i-Mate JAMin
CC002-Palm
PTM133
Step 1.
Windshield Installation
(A)
Push the pedestal suction cup (A) firmly to the windshield.
Flip the lever (B) down to secure the suction cup.
(B)
(B)
Dash Installation (Optional,
when disc is included)
(C)
(A)
(B)
Step 1.
Step 2.
Locate a safe flat surface on
the dash or console to
mount the pedestal. Clean
the dash with the alcohol
pad provided. Let the dash
surface dry before applying
the adhesive disc (C).
Push the pedestal suction
cup (A) firmly to the disc (C).
Flip the lever (B) down to
secure the suction cup.
(G)
(E)
(D)
(F)