Arlec LVS100 User manual

RIGHT READ DYELINE
LVS100 – CPCD002975
(50mmW x 65mmD)
BACK FRONT
© This packaging is subject to copyright
and must not be reproduced, copied
or otherwise used in any way or for any
purpose without the consent in writing
of the owner, Arlec Australia Pty Ltd
(ACN 009 322 105).
Visit us at www.arlec.com.au
Made in China CPCD002975
P
O
W
E
R
E
D
B
Y
S
U
N
L
I
G
H
T
C
O
S
T
E
F
F
I
C
I
E
N
T
SOLAR
L
O
N
G
L
I
F
E
T
E
C
H
N
O
L
G
Y
E
N
E
R
G
Y
S
A
V
I
N
G
WHITE
LED
QUALITY
STAINLESS
STEEL
Solanum
LED SoLar
boLLarD Light
With Opalescent Mosaic Lens
LVS100

RIGHT READ DYELINE
LVS100 – CPCD002975
(50mmW x 65mmD)
LEFT INSIDE RIGHT INSIDE
inStaLLation
1.
Remove light head from top of
lens by twisting in an anti-clockwise
direction.
2. Slide switch to the ON position as shown.
3. Remove stake from support tube by
twisting in anti-clockwise direction.
Attach stake to support tube as shown.
4. Insert stake into ground in position
so as to receive the maximum sunlight
on the solar panel, thus assisting in
adequate charging. Ensure that the light
is not positioned close to another night
time light source.
ON/OFF Switch Garden Stake
important information
Battery will require charging before
first use. Once charged, the light
will turn on automatically when the
light level dims.
It may take a
few days of
good sunlight to
achieve optimum
performance. On
cloudy days, the
charge from the
solar panel will
be reduced with
corresponding
reduction in
brightness and
length of operation.
60mm
220mm
117mm
Support Tube