Arlo Technologies, Inc Baby Series User manual
Arlo Baby
Quick Start Guide
3
What’s in the box
Arlo Baby
camera
USB power
cable
Wall-mount
plate
USB power
adapter
(varies by region)
Mounting screws
and anchors
4
Get the Arlo app
Download the free Arlo app to get started.
The app guides you through installation.
5
Use the wall mount
You can place Arlo Baby on a flat surface or mount it on a wall.
1. Place the wall plate.
2. Secure the wall plate with the included screws.
3. Align the holes on the base of your camera with the wall
plate.
4. Rotate the camera until the base snaps into place.
6
Tilt and swivel
Position your camera so that it captures the area that you want
to monitor.
8
Add Arlo Baby to the Apple Home app
1. Locate your HomeKit code.
The code is on the back cover of this guide and on the Arlo
Baby camera label on the bottom of your camera.
2. Launch the Apple Home app.
3. Tap the plus sign at the top of the page on the Home tab
and then tap Add Accessory.
You can type the HomeKit
code that is on the Arlo Baby
camera label
You can scan the HomeKit code
on the back of this guide
xxx-xxx-xxx
9
Your Apple mobile device’s camera launches and you are
prompted to scan or enter the HomeKit code.
4. Scan the HomeKit code using your mobile device’s camera.
If you have trouble scanning the code, tap Don’t Have a
Code or Can’t Scan? and then type the code.
5. After your camera is added, do the following to complete the
setup process:
• Rename your camera.
• Assign your camera to a room within HomeKit, or create
a new room to place it in.
• Add your camera to your Favorites.
6. Tap Done on the top right.
For live video, tap the Arlo Baby screen shot. To start using two-
way audio, tap the microphone icon on the bottom right.
Use of the Works with Apple HomeKit logo means that an electronic accessory was designed
to connect specifically to iPod touch, iPhone, or iPad, respectively, and is certified by the
developer to meet Apple performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards.
10
Arlo Baby features
¾Rechargeable battery
Your Arlo Baby camera includes a built-in rechargeable
battery and can work for several hours at a time without
being plugged in. You can place the camera in locations
where you cannot connect it to a power outlet.
Use the switch on the bottom
of the camera to power the Arlo
Baby camera’s battery o. The
camera’s battery is on when the
green color is visible.
If the camera is unplugged and you don’t want
the battery to lose its charge, set the switch
to o.
O
On
11
¾Night light
Use the app or the top
button on the right side of
the camera to turn the night
light on and o.
¾Music
Use the app or the bottom
button on the right side
of the camera to play and
pause music.
¾Local streaming
Enjoy minimal video lag by connecting your mobile device
to the same WiFi network (SSID) as the one Arlo Baby is
connected to.
Apple HomeKit setup code
©2018 Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are
trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries. Google Play and the Google Play logo
are trademarks of Google Inc. Amazon, Alexa and all related logos are trademarks
of Amazon.com, Inc. or its aliates. Other trademarks are for reference purposes
only.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
For regulatory compliance information including the EU Declaration of
Conformity, visit www.arlo.com/about/regulatory/.
Arlo Technologies, Inc.
2200 Faraday Ave. Suite 150
Carlsbad, CA 92008 USA
Arlo Technologies Intl. Ltd
Ground Floor, Building 3
University Technology Centre
Curraheen Road, Cork T12 EF21 Ireland
May 2019
This manual suits for next models
2
Table of contents
