ARMAC MARTIN Flush Pull User manual

0121 359 2111 | armacmartin.co.uk | [email protected]
How to install your Flush Pull
Contents
Flush Pull - x1
Snap off screws - x2
Tools Required
- Appropriate safety equipment i.e. safety glasses
- Spirit level
- Drill
- Screwdriver
- Tape measure
- Pencil
We recommend tting is carried out by a suitably qualied tradesman and ensuring the product is
suitable for your application.

Step One -Dene Shape
Mark out the rear of the pocket, taking care to measure the dimensions of the
ush pull against your cabinetry. Use a spirit level to ensure your cutout shape
is level.
Router the pocket and drill holes with a 4mm drill to the correct depth.
Step Two -Drill Holes
Cut the rear x m4 screws to the appropriate size for the cabinet. Place the
M4 snap off screws into the holes from inside the cabinet.
Step Three -Insert Screws

Offer up the ush pull and position it in the pocket to the M4 snap off screws
and x the ush pull to the cabinet.
Step Four -Fix Flush Pull
Finish Care & Cleaning
Thank you for purchasing your Brass Flush Pull from Armac
Martin. Our products are of the nest quality and hand nished.
Please follow the below care guide to maintain the
condition of the product.
Wipe your product down with a soft dry cloth
Do not use abrasive cleaners, ammoniated products, rubbing
alcohol, detergents, astringents, bleach based cleaners, aggressive
chemicals, abrasive cleaning pads, or harsh polishes on the
product