Armasight APOLLO User manual

Each button is responsible for some functions selected by briey pushing
or holding down the button, or using the button in combination with a
second one.
Pushing a button for 1.5+ second is considered“holding down.”
APOLLO
THERMAL IMAGING CLIP-ON SYSTEM
QUICK REFERENCE GUIDE
5 - SELECTION
SELECTION
MAIN MENU
3 - DOWN
BRIGHTNESS DOWN
PALETTE (BWD)
4 - LEFT
RETICLE COLOR
RETICLE PATTERN
0.1 sec click
1.5 sec hold
SYMBOL ACTION
1 - UP
BRIGHTNESS UP
PALETTE (FWD)
2 - RIGHT
DIGITAL ZOOM
RETICLE ON/ OFF
TRIGGERS UCMNUC/
FFC*MANUALLY
1 + 3 (hold simultaneously)
RESETS THE RETICLE
POSITION TO DEFAULT
2 + 4 hold simultaneously
Armasight Inc.
815 Dubuque Avenue
S. San Francisco, CA 94080, USA
Phone: [phone]
Fax: [phone]
Intl Phone/Fax: [phone]
[email protected]
www.armasight.com
THE USED SYMBOLS
AND CONVENTIONS
* UCMNUC/FFC - User Controlled
Manual Non Uniformity
Correction/ Flat-Field Correction

#CONTROL FUNCTION
BATTERY CASSETTE
OBJECTIVE FOCUS RING
CONTROL PANEL BUTTONS
TURN-PULL SWITCH
CONNECTOR
BATTERY CAP Protects the battery compartment.
Intended for the installation of two CR123 batteries in the battery compartment.
QUICK-RELEASE MOUNT
REMOTE CONTROL
2
3
4
5
6
7
1
8
Focuses the objective lens. Adjusts for sharpest view of the scene.
The color ll (green/ yellow/ red) bar in the battery icon
indicates the current power level of the internal battery, or
remaining battery life.
The totally shaded battery icon indicates the fully charged
battery.
The ashing transparent battery icon indicates a low battery.
An external video display (monitor, TV) or video recorder, a digital video recorder,
an external battery pack or power source can be connected to the Apollo.
Activates/deactivates the Apollo in standby mode. To turn the unit on, press the
button once. To turn it o, press the button again.
Fits any Picatinny, MIL-STD-1913, or Weaver weapon rail. The mount’s lever-cam
clamping device ensures easy, quick and reliable mounting and removal.
∙Activates the Apollo when turned to ON.
∙Activates standby mode when turned to STB.
∙Deactivates the Apollo when turned to OFF.
NOTE: You must pull the knob before turning in order to use either the ON or STB.
Congures operational settings.
BATTERY STATUS INDICATION
(a battery icon in the top right hand corner of the display)
CONTROLS AND INDICATION
1 2
34
5
6
7
8