WOOSIM PORTI-S30 User manual

http://www.woosim.com
MODEL PORTI-S30/40
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
(2inch Mobile Printer)
Rev. 3.0
All specifications are subjected to change without notice

Porti-S Rev. 3.0
http://www.woosim.com 2


 Copyright
PORTI-S30/40 2inch mobile printer operator’s manual.
Copyright ⓒ2010 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim
Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.


 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.


 Caution
Some semiconductor devices are easily damaged by static electricity. You
should turn the printer “OFF”, before you connect or removed the cable on
the rear side, in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the
printer “OFF”.


 Notice
The contents of this manual are subject to change without notice .

Porti-S Rev. 3.0
http://www.woosim.com 3


 Introduction
The PORTI-S30/40 is suitable designed for use with a growing variety of mobile
devices. IrDA/Serial or Bluetooth/Serial interfaces make the PORTI-S30/40 the
perfect comrade for applications such as point of transaction warehousing,
distribution, point of sales, hospitality, gaming and healthcare.
The general features of PORTI-S30/40 printer are as follows:
 Pocket size (S30 : 75.95 x 103 x 36.15mm)
 Light weight (S30:226g, S40:264g) for true mobility.
 Very silent printing thru direct thermal printing method.
 High speed(80mm/sec, MAX)
 High resolution(203dpi : 8dots/mm).
 UART(RS-232C or TTL), Bluetooth Ver 2.1 + EDR
IrDA Ver 1.0(SIR)[option], USB [option] Interface
 Intuitive LED’s indicate Power(on/off),Error and Battery status
 Support text and graphic printing.
 Easier paper loading by CLAMSHELL design.
 Easier maintenance with self-diagnostics.
 In field programming – Update Firmware, Download Fonts and Logos
 Microsoft Windows XP / VISTA / 7 / CE / Linux / Android compatible.
 Free fall: 1.5 meter onto concrete
 Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
 Agency Approvals

Porti-S Rev. 3.0
http://www.woosim.com 4


 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance
of the printer.


 Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
● The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
 Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
●
Always use the clean thermal paper.

Porti-S Rev. 3.0
http://www.woosim.com 5


 Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
These equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception , which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

Porti-S Rev. 3.0
http://www.woosim.com 6
CONTENTS
1. Outline...........................................................................................................................................7
1.1. Model classifications ..........................................................................................................7
1.2. Product Part Number System...........................................................................................7
1.3. Specifications.......................................................................................................................8
2. Setting up the printer.............................................................................................................10
2.1. Printer & Accessories.......................................................................................................10
2.2. Printer Features .................................................................................................................11
2.3. Replacing the paper roll..................................................................................................12
2.4. Power supply .....................................................................................................................13
2.4.1. Internal power supply.............................................................................................13
2.4.2. Installing the Battery ..............................................................................................13
2.4.3. Recharging the battery ..........................................................................................14
2.5. Set operation mode.........................................................................................................15
3. Interface......................................................................................................................................22
3.1. UART(RS-232C or TTL) or USB .......................................................................................22
3.2. Infrared data communication.........................................................................................23
3.3. Bluetooth............................................................................................................................24
4. Using the printer......................................................................................................................25
4.1. Control panel.....................................................................................................................25
4.2. The self test .......................................................................................................................26
5. Consumable Parts ....................................................................................................................27
5.1. Recommended paper.......................................................................................................27
5.2. Printing position ...............................................................................................................27

Porti-S Rev. 3.0
http://www.woosim.com 7
1
1. . O Ou ut tl li in ne e
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s
1
1. .2 2. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m
PORTI–S ( ) ( ) ( )
Model
Size of roll paper
30: 57mm wide, 30Ø
40: 57mm wide, 40Ø
Interface
A1:UART/Bluetooth
Power
None : DC 8.4V
Model name / Interface Spec.
Example) 1. Porti-S40 UART/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C
1 Bluetooth
B TTL 2 IrDA
C USB 0 None
D RS-485
E Parallel
Z None

Porti-S Rev. 3.0
http://www.woosim.com 8
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item Specification
Printing method Direct thermal line printing
Characters per line 42cpl (MAX)
Character size Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]
Optional Characters
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution 203dpi, 8dots/mm
Print width 2-inch (48mm, 384dots)
Printing speed 80mm / sec (MAX)
Dimensions S30 : 75.95 x 103 x 36.15 mm
S40 : 75.95 x 103 x 44.75 mm
Weight S30 : 226g, S40 : 264g (Including battery & roll paper)
Interface UART(RS-232C or TTL) , Bluetooth Ver2.1 + EDR
IrDA Ver1.0(SIR) [option], USB[option]
Paper supplied Thermal roll paper, Label roll (57mm wide, S30:30ø_S40:40ø)
Barcode supplied
1
-
dimension : Code128, Code39, I2/5, Code93 UPC, EAN, KAN,
JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
Driver Microsoft Widows XP / VISTA / 7
Windows CE, Linux, Android OS driver compatible
Black mark Support black mark detection
H/W spec. MCU : 32bits RISC, FLASH : 4Mbytes, RAM : 8Mbytes
Receive buffer size 1M bytes
Battery Rechargeable 7.4V DC , 1200mAh (Li-ion)
Battery duration 1 hour continuous printing
Battery Charger Input (100~250V AC 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
(Continue…)

Porti-S Rev. 3.0
http://www.woosim.com 9
Item Specification
Environment
Conditions
Temperature -10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity 30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical 37,000,000 lines
Head Approximately 50 Km
< Table 1 >

Porti-S Rev. 3.0
http://www.woosim.com 10
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
Battery charger adaptor
Leatherette case
▼ OPTIONAL
Car charger
Battery pack
Thermal roll paper
PORTI-S
External Battery Cradle
Communication cable