Armour Home Electronics Dakota 9200 User manual

Q16484-AI_r1
PLACE LABEL
Q14171-SK
HERE
01942 524 100
customer[email protected]o.uk
Armour Home Electronics, Units 7 & 8, Stortford Hall Industrial Park,
Dunmow Road, Bishops Stortford, Hertfordshire, UK, CM23 5GZ
9200

2
9200
Thank you for purchasing this chair. Please inspect all parts prior to assembly and contact us if
there are any damaged or missing components. This must be done before attempting assembly.
Pre-assembly preparation
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this
leaflet. If any components are missing, please contact the retailer from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid
personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 1 PERSON.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly to ensure safe and satisfactory operation of this product.
Safety Instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause
damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by incorrectly
installed or assembled furniture.
It is recommended that before moving heavy objects to a new location they are completely
dis-assembled to avoid personal injury or damage to the furniture. Please be careful to retain
all fittings when doing this.
Never tilt the chair. Ensure the chair is always placed firmly on the ground.
This is a type C oce chair with adjustable seat height only.
The fitted castors are suitable for all floor types.
WARNING :
Sit on the chair to use the weight of the body to tighten the joint on the column and the seat.
Please note this is not a permanent fit due to the rise & fall and 360 degree turning action.
Always take care and keep feet clear of base when moving / lifting this product.
Do not stand on chair as this may cause serious injury.
Do not use the chair if any part appears damaged, broken or missing.
Do not use the chair unless all components are correctly fitted and adjusted.
Only trained personnel may replace or repair seat height adjustment components with energy
accumulators.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
ARMOUR HOME ACCEPTS NO LIABILITY FOR ANY DAMAGE CAUSED THROUGH INCORRECT OR
INAPPROPRIATE USE OF THIS PRODUCT.