ARRI ARRIFLEX D-21 User manual

ARRIFLEX D‑21
INSTRUCTION MANUAL
November 2009
COPYRIGHT © 2009 ARNOLD & RICHTER CINE TECHNIK GMBH & CO BETRIEBS KG. ALL RIGHTS RESERVED.
NO PART OF THIS DOCUMENT MAY BE USED FOR DISTRIBUTION, REPRODUCTION, TRANSMISSION,
TRANSCRIPTION, STORAGE IN A DATA RETRIEVAL SYSTEM, OR TRANSLATED INTO ANY LANGUAGE
IN ANY FORM BY ANY MEANS WITHOUT THE PRIOR WRITTEN CONSENT OF ARRI.
IF YOU ARE DOWNLOADING FILES FROM OUR WEB PAGES FOR YOUR PERSONAL USE, MAKE
SURE TO CHECK FOR UPDATED VERSIONS. ARRI CANNOT TAKE ANY LIABILITY WHATSOEVER FOR
DOWNLOADED FILES, AS TECHNICAL DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Eyepiece lock
LOCK switch
NORM - PS/CCU switch
PROG button
MODE button
Eyepiece focus
adjustment
Accessory mounting
rosette
Eyecup
SEL button
SET button PHASE button
RUN button
Operation control LED

Image rotation release
PL mount
Ground glass
Main camera switch
Image rotation knob
Tape hook
Viewfinder arm
friction adjustment
Viewfinder arm
Viewfinder
extension lock

Grip system
Lens data system
(LDS) status LED
Wireless control system
channel selection and
status LED
RS socket
(remote RUN & 24 V)
24 V accessory
overload LED
Accessory mounting
rosette
CLM-2 lens motor
connectors
Lens control system
(LCS) bus socket
Lens data display
(LDD) socket
Accessory
(ACC) socket
Camera control unit (CCU) socket
Lens motor direction
switches

Video menu button
Imaging status LEDs
Service port
Output board
HD-SDI-2 link A/B
Output board
HD-SDI-1 link A/B
Power supply
(BAT) socket
S-Video, Y/C
(SD output)
Composite video
(SD output)
3/8-16 mounting holes
(camera base)
Camera control
unit (CCU) socket
Accessory
(ACC) socket
11-pin accessory
socket (12 V) and
overload LED
Lens control system
(LCS) bus socket
HD clock pulse
output
Grip systemTape hookSpirit levelViewfinder swivel release

Contents
6
1. Contents .............................................................................................................. 6
2. Safety Instructions ............................................................................................ 12
2.1. General Safety Instructions .................................................................................................12
2.2. Specic Safety Instructions .................................................................................................13
3. General Precautions .......................................................................................... 14
3.1. Storage and Transport .........................................................................................................14
3.2. Electromagnetic Interference ..............................................................................................14
3.3. Condensation .......................................................................................................................15
4. Disclaimer .......................................................................................................... 16
5. General Description ........................................................................................... 18
Product Identication ..................................................................................................................18
Scope ...........................................................................................................................................19
6. Power Supply .................................................................................................... 20
6.1. Mains Unit NG 12/26 R ........................................................................................................20
6.2. CINE VCLX/2 Charger ..........................................................................................................21
6.3. CINE VCLX/2 Charger ..........................................................................................................21
6.4. Main Camera Switch............................................................................................................22
6.5. Accessory Power Supply .....................................................................................................23
12 V Accessories .........................................................................................................................23
24 V Accessories .........................................................................................................................24
Overload Display..........................................................................................................................24
7. Installation of the Camera ................................................................................. 25
7.1. Minimal Equipment Required for Operation ........................................................................25
Contents1.
D‑21 Left/Right/Front/Rear View .................................................................................. 2

Contents
7
7.2. Tripod and Remote Heads ...................................................................................................25
7.3. Bridge Plate Set BP-8, BP-9 .................................................................................................26
Attaching the Bridge Plate to the Camera ...................................................................................27
Putting the Camera on the Tripod ...............................................................................................27
Removing the Camera from the Tripod .......................................................................................27
7.4. Lens Support ........................................................................................................................28
7.5. Grip System .........................................................................................................................29
Additional Hand Grips .................................................................................................................29
Removing the Grip System ..........................................................................................................29
8. Optics ................................................................................................................ 30
8.1. Lenses ..................................................................................................................................30
Lens Mount..................................................................................................................................30
Lens Mount Position ....................................................................................................................30
Changing Lenses .........................................................................................................................30
8.2. Viewnder System ...............................................................................................................31
Viewnder Arm ...........................................................................................................................33
Image Orientation ........................................................................................................................34
Removing the Viewnder System ...............................................................................................35
Universal Finder Arm ...................................................................................................................36
8.3. Ground Glasses ....................................................................................................................37
Exchanging the Ground Glass .....................................................................................................37
8.4. ARRIGLOW ..........................................................................................................................38
Exchanging the ARRIGLOW Mask ..............................................................................................38
9. Camera Output Conguration .......................................................................... 40
9.1. Output Interfaces .................................................................................................................40
9.2. Video Menu ..........................................................................................................................40
Using the Video Menu .................................................................................................................41
Status Indications ........................................................................................................................41

Contents
8
9.3. Setting Operational Parameters ...........................................................................................42
User Mode ...................................................................................................................................42
White Balance .............................................................................................................................44
Standard Frame Rate ...................................................................................................................47
HD-SDI Mode ..............................................................................................................................50
Overview of Available Output Formats .......................................................................................51
Output Range (Advanced Mode) .................................................................................................52
Color Matrix (Advanced Mode) ...................................................................................................53
Recommended Combinations of Contrast Characteristics, White Balance and Color Matrix ....54
Contrast Characteristics ..............................................................................................................54
SD Mode ......................................................................................................................................59
Diagnostics ..................................................................................................................................61
9.4. OSD Tools ............................................................................................................................64
10. Signal Connections ............................................................................................ 65
10.1. Signal Monitoring.................................................................................................................65
10.2. Signal Wiring Instructions ...................................................................................................65
HD422 Setup (Standard Mode) ...................................................................................................66
HD422 High Speed Setup (Standard Mode) ...............................................................................67
HD444 Setup (Standard Mode) ...................................................................................................68
Mscope HD422 Setup (Standard Mode) .....................................................................................69
Data Mode/ARRIRAW Setup (Advanced Mode) .........................................................................70
11. Camera Operation .............................................................................................. 71
11.1. Running and Stopping the Camera ......................................................................................71
11.2. Camera Display Modes ........................................................................................................72
Overview of Display Modes ........................................................................................................73
Overview of Display Symbols ......................................................................................................74
Shutter Angle Display (Mode 1) ..................................................................................................75
Locking Camera Controls ............................................................................................................75

Contents
9
11.3. Standard and Programmed Frame Rates ............................................................................76
General Procedure for Changing Frame Rates ............................................................................76
Setting a Programmed Frame Rate (Mode 2) ..............................................................................77
11.4. Frame Counter and Battery Information ..............................................................................80
Switching between Display of Frame Counter and Mirror Shutter Angle (Mode 1) ...................81
Setting the Frame Counter Conguration (Mode 3) ....................................................................81
Displaying the Power Supply Voltage (Mode 3) ..........................................................................82
11.5. Mirror Shutter Angle and Warning Signal ...........................................................................83
Enabling/Disabling the Asynchronous Running Warning Signal (Mode 4) .................................83
Enabling/Disabling the Mirror Shutter (Mode 4) .........................................................................84
Setting the Mirror Shutter Angle (Mode 5) .................................................................................85
12. Recording .......................................................................................................... 86
12.1. Recording Format Setup ......................................................................................................86
12.2. Starting and Stopping the Recording ..................................................................................86
Recording Devices with Variable Frame Rate (VariFrame) Support: ...........................................87
Recording Devices without Variable Frame Rate (VariFrame) Support: .....................................87
13. Functional Expansion Module FEM‑2 ................................................................ 88
13.1. Lens Data System ................................................................................................................89
13.2. Wireless System ..................................................................................................................90
Installing the URM-3 Radio Receiver ..........................................................................................90
Using the Wireless System .........................................................................................................91
13.3. Remote Lens Control ...........................................................................................................93
CLM-2 Status Indications ............................................................................................................93
13.4. Camera Remote Control ......................................................................................................94
13.5. Compatibility ........................................................................................................................95
ARRIFLEX D-21 FEM-2 Compatibility List ...................................................................................95
Incompatible Accessories ...........................................................................................................96
13.6. Replacing the FEM-2 ............................................................................................................96

Contents
10
Removing the FEM-2 ...................................................................................................................97
Attaching the FEM-2 ...................................................................................................................97
14. Accessories ....................................................................................................... 98
14.1. External Synchronization Unit ESU-1 ..................................................................................98
14.2. Flash Mag Mounting Adapter FMA-1 (discontinued) ..........................................................99
14.3. Heated Eyecup (HE-4/HE-5) ...............................................................................................100
14.4. Isolating Power Adapter IPA-1 ...........................................................................................101
14.5. Low Mode Support ............................................................................................................102
14.6. Remote Run Switch (RS-4) ................................................................................................104
14.7. RS Socket Distributor (24 V Plug-on Module) ...................................................................105
14.8. Shoulder Set S-5 ................................................................................................................106
14.9. Fiber Link Unit FLU-1 .........................................................................................................107
Fiber Link Remote FLR-1 ...........................................................................................................107
14.10. Wireless Remote Control WRC-2 ...................................................................................... 110
14.11. Work Light ......................................................................................................................... 111
14.12. General Note ...................................................................................................................... 111
15. Camera Care .....................................................................................................112
15.1. General Information ........................................................................................................... 112
15.2. Imager Check ..................................................................................................................... 112
Imager Surface .......................................................................................................................... 112
Dust Check ................................................................................................................................ 113
Cleaning the Sensor Cover Glass .............................................................................................. 114
Condensation............................................................................................................................. 116
Pixel Failure................................................................................................................................ 117
Cleaning the Field Lens ............................................................................................................. 119
16. Technical Data ‑ ARRIFLEX D‑21 ..................................................................... 120