ARRI CCM-1 User manual

CCM-1
Camera Control Monitor
OPERATING MANUAL
August 2023 • 1.0 • English

Imprint
CCM-1 Operating Manual 3
Imprint
© 2023 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved.
The device contains proprietary information of Arnold & Richter Cine Technik GmbH & Co. Betriebs
KG; it is provided under a license agreement containing restrictions on use and disclosure and
protected by copyright law. Reverse engineering of the software is prohibited.
No part of this publication may be used for distribution, reproduction, transmission, transcription,
storage in a data retrieval system, or translated into any language in any form by any means without
the prior written permission of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
If you are downloading files from our web pages for your personal use, make sure to check for
updated versions.
ARRI cannot take any liability whatsoever for downloaded files, as technical data are subject to
change without notice.
Due to continued product development the information in this document may change without notice.
The information and intellectual property contained herein is confidential between ARRI and the
client and remains the exclusive property of ARRI. If you find any problems in the documentation,
please report them to us in writing. ARRI does not warrant that this document is flawless.
AMIRA, ALEXA, ALEXA XT, ALEXA SXT, ALEXA LF, ALEXA Mini and ALEXA Mini LF are
trademarks or registered trademarks of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All
other brands or products are trademarks or registered trademarks of their respective holders and
should be treated as such.
Original version.
For Further Assistance
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Herbert-Bayer-Str. 10
D-80807 Munich
Germany
E-mail: [email protected]
Website: www.arri.com/en/technical-service

Content
iv CCM-1 Operating Manual
Content
Imprint .......................................................................................................................................................... 3
1 About this document .................................................................................................................................. 5
2 About this Product ...................................................................................................................................... 6
2.1 Introduction ........................................................................................................................................... 6
2.2 Intended Use......................................................................................................................................... 6
2.3 Identification .......................................................................................................................................... 6
2.4 Environmental Conditions ..................................................................................................................... 6
2.5 Technical Data ...................................................................................................................................... 7
2.6 Dimensional Drawing ............................................................................................................................ 8
2.7 Scope of Delivery and Warranty ........................................................................................................... 8
2.8 Approval Information ............................................................................................................................. 9
3 Safety Instructions ...................................................................................................................................... 11
3.1 General Safety Instructions................................................................................................................... 12
4 Product overview ....................................................................................................................................... 15
Layout ................................................................................................................................................... 15
5 Mounting and Assembly............................................................................................................................. 16
5.1 Power Supply and Connect................................................................................................................... 16
5.2 Attachment of Accessories.................................................................................................................... 16
5.3 Sunhood................................................................................................................................................ 17
6 Basic Operation........................................................................................................................................... 18
6.1 ARRI Camera Controls ......................................................................................................................... 18
6.1.1 Classic Menu ............................................................................................................................. 18
6.1.2 Home Screen ............................................................................................................................. 18
6.1.3 Interactive Overlays ................................................................................................................... 18
6.1.4 Playback Control........................................................................................................................ 19
6.2 PageOS Overview................................................................................................................................. 19
6.2.1 General Layout .......................................................................................................................... 19
6.2.2 Basic Navigation ........................................................................................................................ 20
6.2.3 Pages......................................................................................................................................... 20
6.2.4 Settings ...................................................................................................................................... 21
7 Cleaning, Maintenance and Repair............................................................................................................ 23
8 Transportation, Storage and Disposal ...................................................................................................... 24
9 ARRI Service Contacts ............................................................................................................................... 25

About this document | 1
CCM-1 Operating Manual 5
1 About this document
This operating manual is aimed at everyone involved in using the device. It provides directions on
how to operate it safely and as intended. To ensure safe and correct use, all users must read the
operating manual before using the device for the first time.
This operating manual is an essential part of the device. It must be easily accessible and in close
proximity to the device so that users can use it as a reference anytime.
The separate user manual contains more detailed information about the features and functionalities
of the device. Please visit the website www.arri.com to download the user manual.
Keep the operating manual, the user manual and all other operating and assembly instructions
belonging to the device in a safe place for future reference and possible subsequent owners.
For useful information in addition to these manuals please have a look at the ARRI learn & help
section on the ARRI website.
The ARRI Academy courses provide unrivalled insights into the full possibilities of working with ARRI
camera systems, lenses, lighting systems and accessories.
Our advanced service training courses are designed to transfer detailed knowledge about how to
service and repair all types of ARRI products and give you permanent access to detailed Service
instructions, special tools and spare parts. To learn more, please visit ARRI academy or contact
[email protected].
www.arri.com/ccm-1
Document Revision History
Document ID: D45 1000 7638
Version Release Date Note
1.0 K11303 July 2023 First Release

2 | About this Product
6 CCM-1 Operating Manual
2 About this Product
2.1 Introduction
The CCM-1 is a 7” onboard monitor that provides full camera control and menu access for the
ALEXA 35 and ALEXA Mini LF. The CCM-1 is ideally suited to numerous production types and
applications.
For camera operators who prefer to judge framing and exposure with an onboard monitor rather
than a viewfinder, the CCM-1 is an easy choice.
2.2 Intended Use
The CCM-1 is a camera control monitor for professional use in broadcast and film production
environments.
NOTICE
All versions of the CCM-1 are intended exclusively for professional use. It must be used only by
skilled personnel. Read and understand the operating manual and the user manual before use.
Use the product only for the purpose described in this document. Always follow the safety
instructions and system requirements for all equipment involved. ARRI assumes no liability for
damages or changes that are caused by improper use. You are not allowed to modify the device.
2.3 Identification
The CCM-1 serial number is located on the
product label in the lower center of the CCM-1.
The serial number consists of the last 4 digits of
the product number K2.00YYYYYY-1234 (here:
1234).
2.4 Environmental Conditions
The CCM-1 should only be used and stored under certain environmental conditions.
Check the following conditions before commissioning and operation:
Permissible Operating Temperature 32° F to 113° F (0° C - 45° C)
Permissible Storage Temperature -4° F to 158° F (-20° C - 70° C)
Permissible Humidity 0 - 95% RH
non condensing

About this Product | 2
CCM-1 Operating Manual 7
2.5 Technical Data
Mechanical Specification
Dimensions (H x W x D) 4.72 x 7.36 x 1.15 in (120 x 187 x 29 mm)
Weight 0.65 lbs (0,3 kg)
Material Aluminum alloy
Arm mounting 4x ARRI Pin-Lock1/4" mounting points (Top, Bottom, Rear,
Right Side)
Hood mounting Friction attach
Electrical Specification
Power input PWR + VF connector
Power consumption up to 20 W
Firmware requirement Compatible with TBD firmware or later
Optical Specification
LCD Type Thin Film Transistor Liquid Crystal Display (TFT LCD) with LED
backlight
Resolution 1920 x 1200
Pixel density 322 ppi
Active screen size 3.72 x 5.95 in (95 x 151 mm)
Refresh rate 30Hz - 60Hz (Locked to incoming frame rate between 7.5fps
and 60fps)
Response time 25 ms
Contrast 1.200 : 1
Screen luminance ~1300 cd/m2 (max.) Backlight Dimming 100% to 0%
Color depth 8+2FRC
Luminance uniformity (typical) 89%
Colors (typical) 96% DCI-P3
Viewing angle 160° all axes
Display orientation Landscape, 180° rotation
User Interface
Touch pCap Multi-Touch
Buttons Menu
User Button 1-4
Back
Power
Lock Slider
Joystick

2 | About this Product
8 CCM-1 Operating Manual
2.6 Dimensional Drawing
All Dimensions in mm.
2.7 Scope of Delivery and Warranty
NOTICE
The packaging consists of recyclable materials. For the sake of the environment, dispose of the
packaging material at a suitable disposal site. Always store, ship and dispose according to local
regulations. ARRI is not liable for consequences from inadequate storage, shipment or disposal.
On delivery, please check if package and content are intact. Never accept a damaged or incomplete
delivery.

About this Product | 2
CCM-1 Operating Manual 9
Delivery
A complete Camera Control Monitor CCM-1 Set KK.0048851 includes:
• 1x K2.0048523 CCM-1 with Foldable Sunhood, Screen Protector
• 1x K2.0048394 Monitor Arm for Camera MAC-1
• 1x K2.0023943 Cable VF (0.5 m / 1.5 ft)
• 1x K2.0001637 Cable RS – RS/PWR IN (0.5 m / 1.5 ft)
Warranty
For scope of warranty, please ask your local ARRI Service Partner. ARRI is not liable for
consequences from inadequate shipment, improper use or use of third-party products.
2.8 Approval Information
The CCM-1 is approved for use in many countries, including European Union, USA, UK, Canada,
China, Japan, Australia, New Zealand, and Thailand.
The import and use in other countries may be subject to legal, official or regulatory requirements and
regulations. It is the importer's or the user's responsibility, prior to importation or use, to inform
themselves of the applicable legal, regulatory and administrative requirements and regulations and
to ensure compliance with these requirements and regulations. This includes the applying for and
obtaining of all necessary approvals or registrations.
As far as reasonable and legally possible, ARRI will support requests in relation to such applications
by providing technical documents or declarations. As an importer or user, you confirm that you are
familiar and comply with the legal, regulatory, and administrative requirements and regulations that
apply in the countries to which you ship or use the products. You further confirm that you will
arrange for any necessary registrations, enrollments, or authorizations that are required in such
countries.
You release ARRI from all obligations resulting from any legislative, regulatory, or administrative
requirements regarding import or use of the products, except in countries where ARRI has obtained
a registration or certification. You agree to indemnify, defend, and hold ARRI harmless from any and
all claims, damages, losses, liabilities, costs, and expenses (including reasonable fees of attorneys
and other professionals) that may arise out of a demand on ARRI in connection with your obligations
mentioned above.
EU Declaration of Conformity
Brand Name: ARRI
Product Description: Camera Control Monitor-1
CCM-1
The product conforms to the specifications of the following European directives:
• Directive 2014/30/EU of the European Parliament and the Council of 26 February 2014 on the
harmonization of the laws of the Member States relating to electromagnetic compatibility
• Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment and
the Commission Delegated Directive (EU) 2015/863 of March 31, 2015.
The compliance with the requirements of the European Directives has been verified by applying the
following standards:
• EN 55032:2015 +AC:2016 +A1:2020 +A11:2020 ; EN 55035:2017 +AC:2019 +A11:2020 ;
• EN IEC 63000:2018
The manufacturer bears sole responsibility for issuing this declaration of conformity.

2 | About this Product
10 CCM-1 Operating Manual
UK Declaration of Conformity
Brand Name: ARRI
Product Description: Camera Control Monitor-1
CCM-1
The product conforms to the specifications of the following United Kingdom regulations:
• The Electromagnetic Compatibility Regulations 2016
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
The compliance with the requirements of the United Kingdom regulations was proved by the
application of the following standards:
• EN 55032:2015 + A11:2020; EN 55035:2017 + A11:2020;
• EN IEC 63000:2018
The manufacturer bears sole responsibility for issuing this declaration of conformity.
FCC Class A Statement
FCC Class A Statement
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Caution: changes or modifications to the product not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Industry Canada Compliance Statement
Complies with CAN ICES-003(A)/NMB-003(A).
Australia and New Zealand Compliance
Brand Name: ARRI
Product Description: Camera Control Monitor-1
CCM-1
South Korea Compliance
Pending.
Taiwan Compliance
Pending.

Safety Instructions | 3
CCM-1 Operating Manual 11
3 Safety Instructions
This safety information is in addition to the specific operating instructions in general and must be
strictly observed for safety reasons. Read and understand all safety and operating instructions
before you operate or install the device. Retain all safety and operating instructions for future
reference. Always follow the instructions in this and all documents supplied with the device to avoid
injury to yourself or others and damage to the device or other objects.
Assembly and operation should only be carried out by trained staff familiar with the device. Only use
the tools, materials and procedures recommended in this document. For the correct use of other
equipment, see the manufacturer's instructions.
Structure of Safety and Warning Messages
These instructions use safety instructions, warning symbols and signal words to draw your attention
to different levels of risk:
DANGER
DANGER indicates an imminent danger. If not avoided, death or serious injury will
result.
Always follow the recommended measures to avoid this hazardous situation.
WARNING
WARNING indicates a possibly imminent danger. If not avoided death or serious
injury may result.
Always follow the recommended measures to avoid this potentially hazardous situation.
CAUTION
CAUTION indicates a potentially imminent danger. If not avoided, slight or minor
injuries may result.
Always follow the recommended measures to avoid this potentially hazardous situation.
NOTICE
NOTICE indicates a potentially harmful situation. If not avoided, the equipment or
something in its surrounding may be damaged.
Always follow the recommended measures to avoid this situation.
HINT
Not relevant to safety, HINT provides additional information to clarify or simplify a procedure.

3 | Safety Instructions
12 CCM-1 Operating Manual
Warning Symbols and Product Labels
General warning sign Warning of electrical voltage
Warning of hot surfaces Warning of sharp element
Warning of the risk of crushing Warning of obstacles on the ground
Please read all instructions carefully
before using the product for the first
time.
Direct Current symbol found on
electronics requiring or producing DC
power.
3.1 General Safety Instructions
WARNING
Operation of the CCM-1 in Case of Obvious Damage
Risk of electric shock and fire hazard caused by short circuit.
uNever use the product if electrical lines or housing are visibly damaged.
uOnly use the type of power source indicated in the manual.
uAlways grip the power plug to unplug the power cable.
uNever operate the product in areas with humidity above operating levels.
uNever expose it to water or moisture.
uDo not get the product wet.
uDo not lay cables over sharp edges (e.g. sheet metal, profile or other cut edges). Damaged
cables can cause electric shock, short circuit or fire.
uDo not remove or deactivate any safety measures from the product (incl. warning stickers or
paint marked screws).
uDo not try to repair the product. Repairs may only be carried out by authorized ARRI service
partners.
WARNING
Falling System Parts
Do not built up or assemble the CCM-1 the wrong way. It can fall down and cause serious injuries
and damage to the product or property.
uInstallation and operation must only be carried out by approved persons who know the product.
Obey the accident prevention regulations.
uNever put the product on a not stable trolley or hand truck, stand, tripod, bracket, table or any
other not stable support device.
uAlways place the product on dedicated support devices.
uSecure the product and its accessories against falling and tipping over. Obey the general and
local safety regulations.
uAlways use a suitable safety rope when you use the product above floor level (i.e. on cranes).

Safety Instructions | 3
CCM-1 Operating Manual 13
WARNING
Connected Cable on the Floor
Risk of injury caused by tripping, falling or slipping over connected cables.
uAlways properly secure cables connected to the product and accessories.
uAlways install cables that they cannot be tripped over.
uIf necessary, use a cable duct or secure the cables with adhesive tape.
uAlways disconnect the cables from the product and accessories before moving.
CAUTION
Hot Surfaces
During extended operation and / or operation at high ambient temperatures, the surface of the
CCM-1 can get hot. Direct sunlight can result in housing temperatures above 60° C (140° F).
uAlways use an approved mount to fasten the CCM-1 to the system.
uNever hold the CCM-1 with bare hands for a long time.
uDo not touch the monitor surface with bare hands. It can get hot during operation.
uDo not put covers on the CCM-1 while it is powered. Make sure cooling fins are not obstructed
and airflow around cooling fins is free.
uDo not put the CCM-1 near any heat sources during operation.
uAt ambient temperatures above 25° C (77° F), prevent the CCM-1 from being exposed to direct
sunlight.
CAUTION
Use of the CCM-1 or CCM-1 Accessories in a Humid Environment and with
Condensation
When you move the device and the accessories from a cool to a warm location or when the device
is used in a damp environment, condensation may form inside the device, and on internal or external
electrical connections. Do not operate the device while condensation is present. It bears risk of
electric shock and/or fire caused by a short circuit.
uDo not operate the device and accessories when condensation occurs.
uWhen you move the device and accessories from a cool to a warm environment, wait for some
time for the components to warm up.
uFind a warmer storage location to decrease the risk of condensation.
CAUTION
Tripping due to Inattention
Risk of injury and damage to the CCM-1.
uAlways pay attention to the surroundings while using the product.

3 | Safety Instructions
14 CCM-1 Operating Manual
CAUTION
Broken Cover Glass
Risk of cutting fingers.
uDo not hit the cover glass.
uUse protective gear in case of broken cover glass.
NOTICE
Drop of the product caused by incorrect assembly on recommended third-party
accessories
Risk of damage to the CCM-1
uInstallation and operation must be done by trained personnel.
uAlways read and understand the operating instructions of third-party accessories before you
mount recommended the accessories (such as pan bar arm).
uAlways use the tools specified by the manufacturer.
NOTICE
Parts Loosening Caused by External Vibration
Risk of damage to the CCM-1.
uDo not use in places where the product is subject to vibration.
uDo not store in places where the product is subject to vibration.
NOTICE
Danger from High Frequency Radiation
Risk of damage to the CCM-1
uDo not use in places where the product is exposed to high frequency radiation.
uDo not store in places where the product is exposed to high frequency radiation.
NOTICE
Use of Unauthorized Accessories and Spare Parts
Risk of damage to the CCM-1
uDo not use any accessories and spare parts that are not recommended by ARRI. They may
damage any connected products and invalidate the warranty.

Product overview | 4
CCM-1 Operating Manual 15
4 Product overview
Layout
Back View
1 2 3 4 5
6 7 8 9 10 11 12
1 USB slot
2 ARRI Pin-Lock 1/4"
3 Power button
4 Back button
5 Joystick
6 VF
7 PWR IN
8 SDI IN
9 2x ARRI Pin-Lock 1/4"
10 SDI IN/OUT
11 Headphone
12 USB Locking connector 5-pin
Left View
13
14
13 Menu button
14 User button 1-4
Right View
15
15 ARRI Pin-Lock 1/4"

5 | Mounting and Assembly
16 CCM-1 Operating Manual
5 Mounting and Assembly
5.1 Power Supply and Connect
Power
The CCM-1 can be supplied via a VF cable or a power cable.
When powering the CCM-1 via a VF Cable the maximum brightness of the monitor is limited to 100
nits.
When powering the CCM-1 via a power cable the maximum brightness of the monitor is 1.300 nits.
1. Switch off the power supply.
2. Connect the Coaxpress cable with the SDI input connector (8) or the power cable with the power
input (7).
3. Switch on the power supply and the CCM-1 with the power button (3).
4. Press the power button (3) to switch off the CCM-1.
Signal
The CCM-1 accepts video signals via 3G-SDI up to 1080p60.
5.2 Attachment of Accessories
Mounting Options
There are four ARRI Pin-Lock 1/4” mounting points (1 x top, 1 x bottom, 1 x rear, 1 x right side) to
mount the CCM-1 to a camera or a rig.
ARRI MAC-1
CAUTION!The housing of the product gets warm during operation. Always use an approved
mount like the ARRI MAC-1 to mount the product to the system.
The CCM-1 is shipped with an ARRI MAC-1 monitor arm. The MAC-1 monitor arm connects to the
mounting points (2, 9, 15). Please observe the orientation of the MAC-1 monitor arm: The marking
“Display side” on the front of the monitor arm must face to the display side of the monitor.

Mounting and Assembly | 5
CCM-1 Operating Manual 17
5.3 Sunhood
This foldable sunhood for the Camera Control Monitor CCM-1 can be mounted to the CCM-1 without
any tools, the side flaps and the top flap hold together magnetically. The outside material is strong
and durable, the inside microfiber material protects the display and prevents reflections. The
sunhood protects the display of the CCM-1 even when folded.

6 | Basic Operation
18 CCM-1 Operating Manual
6 Basic Operation
6.1 ARRI Camera Controls
6.1.1 Classic Menu
The CCM-1 offers access to the complete
camera menu for access to all camera settings.
The menu can be controlled with touch or
physical keys (13) and offers the same, intuitive
layout as the MVF-2.
6.1.2 Home Screen
The familiar HOME screen has been updated for
the larger CCM-1 display and shows all relevant
camera information at a glance. Touching one of
the five main exposure parameters will take users
to a live image where they can make adjustments
with a real-time preview. On the left, an overview
of the user button assignments are shown.
6.1.3 Interactive Overlays
Status Components
A live image with interactive status components
allows quick access to the most frequently
adjusted settings. Changes occur in real time and
can be viewed live instead of changing between
a menu and the image.

Basic Operation | 6
CCM-1 Operating Manual 19
6.1.4 Playback Control
Improved playback control is accessed via the
menu or a user button. An extended clip list can
be viewed during playback and includes a handy
metadata display.
6.2 PageOS Overview
The PageOS interface allows users to configure and assign specific image-analyzing tools and / or
features to up to eight customizable pages. Users can access those tools by navigating to the
corresponding page on the monitor, instead of enabling or disabling features individually.
6.2.1 General Layout
Pages View
The ‘Pages View’ offers a zoomed-out
perspective of all configured pages, allowing
organization and naming to ensure the most
efficient overall setup.
Monitor Settings
The settings page will allow you to adjust a wide
range of global monitor settings.

6 | Basic Operation
20 CCM-1 Operating Manual
6.2.2 Basic Navigation
Touchscreen
PageOS has an easy-to-navigate touchscreen
that works just like your smartphone.
• Pinch to zoom
• Swipe left and right between custom pages
• Slide your finger down for a view of all your
preset pages
• Swipe all the way left to access your deep
settings menu (Calibration, Profiles, etc)
Joystick
Use the joystick (5) to navigate the Pages menu:
• LEFT or RIGHT -- to change Pages
• DOWN -- Enter Page View mode
• UP -- Zoom or Exit Page View mode
Button press or depress selects highlighted
items.
Back Button
Click the back button (4) to close or navigate
back / exit.
User Buttons
Press and hold to program these custom user
buttons (14) as shortcuts.
6.2.3 Pages
Add
To create a new page from either a fresh
workspace, a premade template, or a specific
utility, navigate to the right-hand side of the
Pages View. Select the New Blank Page option
and then choose which type of page you would
like to add or create a custom one from scratch.
Delete
Zoom out and navigate to the page you would
like to delete push down with your joystick (5) to
select the delete option, or if using touch just
press the delete button and then confirm.
Add New Tool to a Page
• Tap your screen while on any page to reveal
the toolbar.
• Press the plus sign that appears on the left
side of the page.
• Select the tool you want to add to that page.
You will be presented with an option to add to
that specific page or to add the tool to all pages,
if you choose to add it to all pages that tool will
be present on every single page, whereas if you
just select single page it will be confined to the
page you are currently on.