Art T8 User manual

Applied Research & Technology • 215 Tremont St., Rochester, NY 14608 • USA • 585.436.2720 tel • 585.436.3942 fax • www.artproaudio.com
Features and specifications subject to change without notice. ©2005 Applied Research and Technology ART-T8-Specs-1204
Celebrating Twenty Years of Audio.
T8 Features:
✔High-quality, passive audio
interface
✔8 high performance transformers
✔XLR,1/4” phone, and RCA type
phono connections on all inputs
and outputs.
✔Reversible rack mount ears
✔Separate input and output signal
grounds reduce hum
✔Audio transformers have an
extremely flat and wide
frequency response
✔Very clean and neutral sound with
a wide variety of signal sources
✔Can be used for signal taps or as
a signal splitter
✔Use as a safer connection between
two audio systems (ie: Computer
workstation or monitor system)
✔19” 1U black all steel case
T8
8 Channel Transformer/Isolator
Specifications
Frequency Response: 10Hz –50kHz, +/-.5dB
@ +4dBu
THD: .01% Typical @ 1kHz,+18dBu,
<.1% @ 100Hz, +24dBu
Channel Separation 90dB typical
CMRR:60dB typical
Phase Error: less than 5°, 20Hz – 20kHz
Insertion Loss: .4dB @ 100k Ohm Load,
5.5dB @ 600 Ohm Load
Input Connections: XLR female balanced, 1/4”
TRS balanced, and RCA type
phono jacks
Output Connection: XLR male balanced, 1/4” TRS
balanced, and RCA type
phono jacks
Dimensions: 1.75”H x 19”W x 3.75”D
(44.5mm x 482.6mm x 95mm)
Weight: 3.75 lbs. (1.7kg)
Power Requirements: Totally Passive
T8 Applications:
Live Sound, Permanent/Fixed Install, D.J., and virtually any PA or AV application
Reversable
Mounting
Ears!