Artforma LED Illuminated Bathroom Cabinet Lily User manual

1
User manual and sssembly Instruction
of LED Illuminated Bathroom Cabinet Lily

2
Thank you that you decided to buy our product. We made all our
products taking care of each detail and we subject them to multiple
tests. We are convinced that you made a purchase that will serve
you for a long time.
Read the instructions carefully before proceeding with the installation. Failure to
follow the instructions may result in the refusal to accept the complaint.
NECESSARY TOOLS
A pencil.
A measuring tape or a ruler.
A level.
A wall plug (Included).
1 mounting plate.
You may also need a person to help you
A drill bit 6mm
A drill and a screwdriver.

SAFETY
3
Warning glass!
Put the cabinet only on a soft surface. Its corners are particularly
prone to mechanical damage.
Do not hang the cabinet on movable elements of the interior
equipment.
Do not glue the cabinet to the wall using an adhesive tape.
Make sure that the surface on which you want to hang the product
on can support the weight of the cabinet and its contents. Total
weight of the cabinet is 30 kg, while the weight of items placed
inside the cabinet should not exceed 10 kg. The wall on which you
hang the cabinets should be at least 10 cm thick and made of
durable material (e.g. concrete, brick, reinforced concrete, etc.).
If you would like to hang the cabinet on a plasterboard wall, use
wall plugs intended for this type of walls (molly plugs, screw
studs). They are not included in the assembly kit.
Good Wrong

4
Content:
1.
2.
3.
4.
First, open the package. Remember not to place the mirror on a hard surface as this
may damage the product.
Check if the package contains all the elements (product received according to the
order, assembly elements).
Then take the mirror out of the packaging and place it on a soft surface (you can use
a folded towel for this).
Make sure the product does not have any scratches or damage. Pay particular atten-
tion to the corners, check them first by removing the protections. If necessary, contact
us, do not install the item with possible damage.
1. 1 mounting plate + 4 x screws with dowels
2. 4 glass shelves
3. 16 holders for shelves
PREPARATION FOR INSTALLATION

INSTRUCTION FOR MOUNTING ON THE WALL
1.
2.
In order to establish the mounting place on the wall, measure the
distance between two holders fixed to the cabinet.
Using the measurements, mark two points on the wall with the centers of the hangers.
Then put the mounting plates in the designated places and mark four points that will
serve you to drill the holes.
5
21
2 1

6
INSTRUCTION FOR MOUNTING ON THE WALL
3. Make sure that the distances between the holders on the cabinet and between the
points marked on the wall are the same.
8. Then put the mounting plates in the designated places and screw them to the wall
with screws.
4.
5.
6.
7.
Check whether there is no installation
in places that were determined
to make holes there.
If there is any installation in the wall,
choose another place for the mount.
Once you determine mounting places
on the wall, drill holes there.
Put 4 wall plugs in the drilled holes.

7
INSTRUCTION FOR MOUNTING ON THE WALL
9. Hang the cabinet on mounting plates.
10. Connect the cabinet to electricity.

8
GUIDELINES RELATING TO
CLEANING AND MAINTENANCE
If blurs remain on the glass after removing the protective film, use the included glue
remover. You can eliminate any streaks with a glass cleaner.
Use only agents intended for cleaning of glass surfaces and a dry microfibre cloth for
everyday maintenance of the mirror.
Avoid cleaning glass with silicone ore acidic agents. Cleaning agents of such kind
may damage surface of the glass and induce its corrosion in the future.

FORAM Sp. z o.o. sp. k.
Karpicko ul. Jeziorna 3, 64-200 Wolsztyn
Mail EU: [e-mail]; Mail PL: [e-mail]
[phone]
We are at your disposal from Monday to Friday from 9am to 3pm.