ARTFOX Lighting Magic 2R User manual

(Instruction version: 1.0)
Instruction Manual
Magic 2R
BEAM SCANNER LASER
hybrid effects projector

2
Notes:

3
Table of contents
 Description of Device.............................................................................................. 4
 Safety Instructions .................................................................................................. 5
 Preparation and Connections ................................................................................ 6
• Safety information ............................................................................................. 6
• Connections ...................................................................................................... 7
• Power Supply ........................................................................................ 7
• DMX ...................................................................................................... 7
 The Menu Field ........................................................................................................ 7
 Operation Instruction .............................................................................................. 8
 DMX Channel Selection (DMX Protocol) .............................................................. 10
 Maintaining and Cleaning ................................................................................... 17
• Safety regulations ........................................................................................... 17
• Maintenance and Interval (rule-of-thumb) ..........................................................17
 Technical Specifications ....................................................................................... 18
 Dimensions ............................................................................................................ 19

4
1. Description of Device
1. Arm
2. Body
3. Lens
1. DMX-Output (3 pin)
2. Power Out
3. Power In
4. LCD display
5. DMX-Input (3 pin)
3
4
5
2 D
3
4
5
2
2
3
5
1
1
3
5
4

5
2. Safety Instructions
 Before powering on the fixture, make sure that the fixtures fans and air
inlets are clean and not blocked.
 Ensure that the fixture head can rotate unhindered throughout its complete
range of pan and tilt movement. A safety distance of at least 0.5 m must be
maintained between the fixture and any easily inflammable material (e.g.
decoration material).
 Attention! Don’t touch the fixture during the operation. This can cause
injuries and/or damages.
 The fixture doesn’t contain any user serviceable parts. Opening the
fixture will void all warranties.
 It is necessary to wait at least 15 minutes after disconnecting the mains
power before handling the fixture.. Pay attention to possible hot parts of the
fixture. -- Danger of BURNING --
 Never look directly into the beam of light .
 Never use optical apertures to observe the beam of light.
 You'll risk serious injury of your eyes and in particular of your retina.
 To ensure safe operation, follow also the Installation guide.
 Operating the light without suitable safety aids like Safety cables or
clamps/hooks can increase the risk of an accident and must be avoided.
 Repair, maintenance, and installation work shall be done by qualified or
certified staff only. You need to pay attention to the common rules of
technology that are not explicitly mentioned in this manual.
 Use only original spare parts. Any structural modification of the system
will terminate all warranty claims.
 Please keep this instruction manual for future reference.
Attention: Class 2M can cause injuries of your eyes even
without optical instruments in front of them or within a distance
of less than 0.5m and short exposure time.
Hence: Avoid direct radiation into your eyes!
The l i gh t is a High-Tech Product. To guarantee a smooth
operation, it is necessary to respect the following rules. The
manufacturer of this device will not take responsibility for
damages through any disregard of the information provided in
this manual. Warranty claims also will be voided in the case that
the fixture housing is opened.

6
3. Preparation and Connections
3.1. Safety information
The light fixtures is fitted with a number of plano-convex lenses in a highly
efficient collimator cluster. This type of lens can act as a strong magnifying
glass.
If the rays from a strong light source (such as the sun or another lighting fixture)
are directed towards the front of any of these fixtures, then internal damage
may occur. In a worst case scenario with a high power light source this can
happen very quickly, damaging the fixture internally, potentially melting
components or causing an internal fire within seconds.
In order to avoid these possible problems please adhere to the following
requirements:
1 Do not expose the front of a fixture to direct sunlight or any other strong
light sources.
2 For outdoor applications during daylight make sure that the front face of
any fixture is either shielded or points away from the sun, even when
fixtures are not in use.
3 Do not modify the front glass or lenses of any fixture.
These requirements have to be followed regardless of whether a fixture is
powered on or off as the magnifying effect is an optical effect and therefore
independent from the (electrical) state of the fixture.
Especially when working with high powered b be ea am m- -l li ig gh ht ts s; extreme caution and
observance of these safety instructions is mandatory.
Should you have any questions about the operation of your fixture then please contact
your local supplier, or their authorized distributor.

7
3.2. Connections
• Power Supply
~100-240 Volt AC, 50-60 Hz, earth contact type plug - Powercon
Connected load 350 VA (W) T6.3A (micro-fuse 5x20mm)
Please see printing on the case for the right electronic supply!
Disconnect from the mains supply for changing the fuse and use
only the above described micro-fuse type.
• DMX
USITT DMX-512 Standard input/output in 3 pin / 5 pin
connectors. Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin
4&5 N.C. The DMX- Addressing starts at the DMX-
Address [001].
4. The Menu Field
You’ll find the control board on the side part of the bottom. It allows
you to make all necessary adjustments of the light . . With the Enter-
key you get into the main menu. Afterwards you can navigate
through the menu with the Up/Down-keys. Push the Enter-key to get
in the next menu level or to confirm your settings. Make them and set
functions ON/OFF with the Up/Down-keys. Confirm and save it with
the Enter-key. Push the Function-key to cancel the entry and go
back to the main menu.
To lock or unlock the keys of the menu field press Mode+Enter+Up simultaneously.
DMX512
DMX-controller
120 Ohms
||

8
5. Operation Instruction
A001
DMX Address
A512
17Ch
Channel Mode
21Ch
Sound
Show Mode
Auto
Master
Slave Mode
Slave
No
Black Out
----------
Yes
On
Sound State
Off
Sound Sense 0--100
No
Pan Inverse
Yes
No
Tilt Inverse
Yes
On
Back Light
Off
On

9
Lamp On/Off
Off
Auto Test
---°C
Temp.
-20--200°C
Fixture Time 0--999
----------
Firmware Version V1.01
No
Factory Defaults
Yes
No
System Reset
Yes

10
6. DMX Channel Selection (DMX Protocol)
Standard-Mode 17 DMX channels
Channel
DMX 17CH:
1 0---127
Pan Movement PAN
128---255
Pan Shaking Movement Slow To Fast
2 0---127 Tilt Movement TILT
128---255
Tilt Shaking Movement Slow To Fast
3
0---2 Open
COLOR
3---4 Open + Color1
5---6 Color1
7---9 Color1 + Color2
10---11 Color2
12---13 Color2 + Color3
14---15 Color3
16---18 Color3 + Color4
19---20 Color4
21---22 Color4 + Color5
23---24 Color5
25---27 Color5 + Color6
28---29 Color6
30---31 Color6 + Color7
32---33 Color7
34---36 Color7 + Color8
37---38 Color8
39---40 Color8 + Color9
41---43 Color9
44---45 Color9 + Color10
46---47 Color10
48---49 Color10 + Color11
50---52 Color11
53---54 Color11 + Color12
55---56 Color12
57---58 Color12 + Color13
59---61 Color13
62---63 Color13 + Color14
64---65 Color14
66---67 Color14 + Open
68---128 Color Wheel Index - Color1 To Color15
129---190
Clockwise Color Rotation From Fast To Slow
191---193
Stop
194---255
CounterClockwise Color Rotation From Slow To

11
Fast
4
0---7 Open
GOBO
8---14 Gobo1
15---22 Gobo2
23---29 Gobo3
30---37 Gobo4
38---44 Gobo5
45---52 Gobo6
53---59 Gobo7
60---67 Gobo8
68---74 Gobo9
75---82 Gobo10
83---89 Gobo11
90---97 Gobo12
98---104 Gobo13
105---112
Gobo14
113---119
Gobo15
120---126
Gobo16
127---133
Gobo17
134---194
Clockwise Gobo Rotation From Fast To Slow
195---255
CounterClockwise Gobo Rotation From Slow To
Fast
5
0---8 Off
PATTERN MACROS
9---16 Pattern Macro 1
17---25 Pattern Macro 2
26---33 Pattern Macro 3
34---42 Pattern Macro 4
43---50 Pattern Macro 5
51---59 Pattern Macro 6
60---67 Pattern Macro 7
68---76 Pattern Macro 8
77---84 Pattern Macro 9
85---93 Pattern Macro 10
94---101 Pattern Macro 11
102---110
Pattern Macro 12
111---118
Pattern Macro 13
119---127
Pattern Macro 14
128---135
Pattern Macro 15
136---144
Pattern Macro 16
145---152
Pattern Macro 17
153---161
Pattern Macro 18
162---169
Pattern Macro 19
170---178
Pattern Macro 20

12
179---186
Pattern Macro 21
187---195
Pattern Macro 22
196---203
Pattern Macro 23
204---212
Pattern Macro 24
213---220
Pattern Macro 25
221---229
Pattern Macro 26
230---237
Pattern Macro 27
238---246
Pattern Macro 28
247---255
Pattern Macro 29
6
0---9 Stop
PATTERN
ROTATION[Clockwise/
CounterClockwise]
10---120 Clockwise Pattern Rotation From Fast To Slow
121---134
Stop
135---245
CounterClockwise Pattern Rotation From Slow
To Fast
246---255
Stop
7
0---9 Stop
PATTERN
ROTATION[Horizontal
/Vertical]
10---120 Horizontal Pattern Rotation From Fast To Slow
121---134
Stop
135---245
Vertical Pattern Rotation From Slow To Fast
246---255
Stop
8 0---127 Pattern Zoom Manual PATTERN ZOOM
128---255
Pattern Zoom From Slow To Fast
9
0---9 Stop HORIZONTAL
PATTERN
MOVEMENT
10---120 Horizontal Pattern Movement Left
121---144
Stop
145---255
Horizontal Pattern Movement right
10
0---9 Stop
VERTICAL PATTERN
MOVEMENT
10---120 Vertical Pattern Movement Up
121---144
Stop
145---255
Vertical Pattern Movement Dowm
11
0---127 0---360°
ECCENTRI 128---191
Clockwise Rotation From Fast To Slow
192---255
CounterClockwise Rotation From Slow To Fast
12 0---7 Stop ECCENTRI SHAKING
8---255 Shaking From Slow To Fast
13 0---255 Prism Movement PRISM
14
0---127 RPrism Indexing
RPRISM 128---191
Clockwise Rotation From Fast To Slow
192---255
CounterClockwise Rotation From Slow To Fast
15 0---255 Dimmer Intensity 0 To 100% DIMMER INTENSITY
16 0---7 No Function SHUTTER
8---255 Shutter From Slow To Fast
17 0---39 No Function FUNCTION[Active

13
40---59 Lamp On After 5S]
60---79 Lamp Off
80---89 All Motors Reset
90---99 Pan/Tilt Motors Reset
100---109
Color Motor Reset
110---119
Gobo Motor Reset
120---129
Shutter & Dimmer Motors Reset
130---139
Other Motors Reset
140---149
Enable Blackout While Pan/Tilt Movement
150---159
Disable Blackout While Pan/Tilt Movement
160---169
Enable Blackout While Color Change
170---179
Disable Blackout While Color Change
180---189
Enable Blackout While Gobo Change
190---199
Disable Blackout While Gobo Change
200---219
System Reset
220---255
No Function
Advanced-Mode 21 DMX channels
Channel
DMX 21CH:
1 0---255
Pan Movement PAN
2 0---255
Pan Movement Fine[16 bit] PAN FINE[16 BIT]
3 0---255
Tilt Movement TILT
4 0---255
Tilt Movement Fine[16 bit] TILT FINE[16 BIT]
5 0---7 No Function PAN SHAKING
8---255 Pan Shaking Movement Slow To Fast
6 0---7 No Function TILT SHAKING
8---255 Tilt Shaking Movement Slow To Fast
7
0---2 Open
COLOR
3---4 Open + Color1
5---6 Color1
7---9 Color1 + Color2
10---11 Color2
12---13 Color2 + Color3
14---15 Color3
16---18 Color3 + Color4
19---20 Color4
21---22 Color4 + Color5
23---24 Color5
25---27 Color5 + Color6
28---29 Color6

14
30---31 Color6 + Color7
32---33 Color7
34---36 Color7 + Color8
37---38 Color8
39---40 Color8 + Color9
41---43 Color9
44---45 Color9 + Color10
46---47 Color10
48---49 Color10 + Color11
50---52 Color11
53---54 Color11 + Color12
55---56 Color12
57---58 Color12 + Color13
59---61 Color13
62---63 Color13 + Color14
64---65 Color14
66---67 Color14 + Open
68---128 Color Wheel Index - Color1 To Color15
129---190
Clockwise Color Rotation From Fast To Slow
191---193
Stop
194---255
CounterClockwise Color Rotation From Slow To
Fast
8
0---7 Open
GOBO
8---14 Gobo1
15---22 Gobo2
23---29 Gobo3
30---37 Gobo4
38---44 Gobo5
45---52 Gobo6
53---59 Gobo7
60---67 Gobo8
68---74 Gobo9
75---82 Gobo10
83---89 Gobo11
90---97 Gobo12
98---104 Gobo13
105---112
Gobo14
113---119
Gobo15
120---126
Gobo16
127---133
Gobo17
134---194
Clockwise Gobo Rotation From Fast To Slow
195---255
CounterClockwise Gobo Rotation From Slow To
Fast

15
9
0---8 Off
PATTERN MACROS
9---16 Pattern Macro 1
17---25 Pattern Macro 2
26---33 Pattern Macro 3
34---42 Pattern Macro 4
43---50 Pattern Macro 5
51---59 Pattern Macro 6
60---67 Pattern Macro 7
68---76 Pattern Macro 8
77---84 Pattern Macro 9
85---93 Pattern Macro 10
94---101 Pattern Macro 11
102---110
Pattern Macro 12
111---118
Pattern Macro 13
119---127
Pattern Macro 14
128---135
Pattern Macro 15
136---144
Pattern Macro 16
145---152
Pattern Macro 17
153---161
Pattern Macro 18
162---169
Pattern Macro 19
170---178
Pattern Macro 20
179---186
Pattern Macro 21
187---195
Pattern Macro 22
196---203
Pattern Macro 23
204---212
Pattern Macro 24
213---220
Pattern Macro 25
221---229
Pattern Macro 26
230---237
Pattern Macro 27
238---246
Pattern Macro 28
247---255
Pattern Macro 29
10
0---9 Stop
PATTERN
ROTATION[Clockwise/
CounterClockwise]
10---120 Clockwise Pattern Rotation From Fast To Slow
121---134
Stop
135---245
CounterClockwise Pattern Rotation From Slow
To Fast
246---255
Stop
11
0---9 Stop
PATTERN
ROTATION[Horizontal
/Vertical]
10---120 Horizontal Pattern Rotation From Fast To Slow
121---134
Stop
135---245
Vertical Pattern Rotation From Slow To Fast
246---255
Stop
12 0---127 Pattern Zoom Manual PATTERN ZOOM
128---255
Pattern Zoom From Slow To Fast

16
13
0---9 Stop HORIZONTAL
PATTERN
MOVEMENT
10---120 Horizontal Pattern Movement Left
121---144
Stop
145---255
Horizontal Pattern Movement right
14
0---9 Stop
VERTICAL PATTERN
MOVEMENT
10---120 Vertical Pattern Movement Up
121---144
Stop
145---255
Vertical Pattern Movement Dowm
15
0---127 0---360°
ECCENTRI 128---191
Clockwise Rotation From Fast To Slow
192---255
CounterClockwise Rotation From Slow To Fast
16 0---7 Stop ECCENTRI SHAKING
8---255 Shaking From Slow To Fast
17 0---255 Prism Movement PRISM
18
0---127 RPrism Indexing
RPRISM 128---191
Clockwise Rotation From Fast To Slow
192---255
CounterClockwise Rotation From Slow To Fast
19 0---255 Dimmer Intensity 0 To 100% DIMMER INTENSITY
20 0---7 No Function SHUTTER
8---255 Shutter From Slow To Fast
21
0---39 No Function
FUNCTION[Active
After 5S]
40---59 Lamp On
60---79 Lamp Off
80---89 All Motors Reset
90---99 Pan/Tilt Motors Reset
100---109
Color Motor Reset
110---119
Gobo Motor Reset
120---129
Shutter & Dimmer Motors Reset
130---139
Other Motors Reset
140---149
Enable Blackout While Pan/Tilt Movement
150---159
Disable Blackout While Pan/Tilt Movement
160---169
Enable Blackout While Color Change
170---179
Disable Blackout While Color Change
180---189
Enable Blackout While Gobo Change
190---199
Disable Blackout While Gobo Change
200---219
System Reset
220---255
No Function

17
7. Maintaining and Cleaning the Light
The light is a fixture of very low maintenance. It is only necessary to clean the air
inlets and outlets as well as the optical lenses from time to time. For safe operation it
is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not build up on, or within the fixture. Otherwise the fixture's light-output
will be significantly reduced or damages can occur. Regular cleaning will not only
ensure the maximum light-output, but will also allow the fixture to operate reliably
throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!
7.1. Safety regulations
1. Pull out the mains power plug!
2. Wait min. 15 minutes after disconnecting power to allow the fixture to cool
down.
7.2. Maintenance and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment details. Hence no
general guidelines can be given. The intervals given below are only suggestions
from our experience.
Position Interval In this way
Optical system
weekly
soft
brush /lint-free cloth
Fan and air channel
monthly
vacuum
cleaner, airbrush, etc.
Attention:
1 Never let optical parts come into contact with oil or fat.
2 Before running the fixture wait until all parts are dry.
3 Never tough lenses with bare fingers.

18
8. Technical Specifications
FEATURES
Multi Effect Luminaire, Beam, Scanner, Laser Simulator
3° Precision Beam
3 Facet Rotating Prism
X / Y and Z High-Speed Mirror System
SOURCE
YODN 132W 2R Lamp
6,000 Hour Average Life
PHOTOMETRIC DATA
Measured with 3° Beam Full On
45,010 LUX 4,181 FC @16.4’ (5m)
12,050 LUX 1,119 FC @32.8’ (10m)
5,633 LUX 523 FC @49.2’ (15m)
3,178 LUX 295 FC @65.6’ (20m)
2,276 LUX 212 FC @82.0’ (25m)
EFFECTS
Strobe
Electronic Dimmer
3 Facet Rotating Prism
Multiple Pattern Macros
Manual Focus
COLORS＆GOBOS
(14) Dichroic Colors + White
(17) Gobos + Open
CONTROL / CONNECTIONS
(2) DMX Channel Modes (17 / 21)
4 Button Control Panel
3pin DMX In/Out
powerCON In/Out
SIZE / WEIGHT
Size: 38.5X30.5X26
Weight: 7.5KG
ELECTRICAL / THERMAL
AC 100-240V - 50/60Hz
220W Max Power Consumption
Multiple Unit Power Linking (max 7 @120V / 14 @230V)
104°F (40°C) Max Ambient Temperature

19
APPROVALS / RATINGS
CE
RoHs
IP20
INSTALLATION
Rigging: Clamps (Not Included)
Working Position: Any (360°)
INCLUDED ITEMS
(1) Adjustable Mounting Yoke
(1) PowerCON Cable
(1) DMX 3pin signal cable
9. Dimensions
Length: 14.2 (361mm)
Width: 12.0 (305mm)
Vertical Height: 11.6 (295mm)
Weight: 21.0 lbs. (9.5 kg)