Artila Aport-212PG User manual

Aport-212PG
Programmable Device Server
User Guide
Version 1.0
Copyright © Artila Electronics Co., Ltd. All Rights Reserved.

Table of Contents
1. Introduction................................................................................................................ 1
1.1 Specification........................................................................................................................ 1
1.2 Packing List......................................................................................................................... 2
1.3 Optional Accessory............................................................................................................. 2
2. Layout......................................................................................................................... 3
3. Pin Assignment and Definition.................................................................................. 4
3.1 Power Connector ................................................................................................................ 4
3.2 Serial Port Connector.......................................................................................................... 4
3.3 LED Status.......................................................................................................................... 4
3.4 Factory Default Settings...................................................................................................... 4
4. Artila Utility Software................................................................................................. 6
4.1 Install Manager Utility Software .......................................................................................... 6
4.2 Broadcast Search................................................................................................................ 6
4.3 Install Software Toolchain................................................................................................... 7
4.4 Install Eclipse IDE............................................................................................................... 7
4.5 Start Your First Project........................................................................................................ 8

Aport-212PG User Guide
‧1‧
1. Introduction
Aport-212PG is a programmable serial to Ethernet gateway which includes Cortex-M3 CPU, 64KB
SRAM and 512KB flash. Aport-212PG is designed for users who are looking for a tiny but mighty
computing platform which has FreeRTOS and lwIP pre-installed. The tool chain, Sourcery
CodeBench Lite can be downloaded from mentor website or you can also use Keil from ARM. A tiny
web server is also available for web-based application such as ajax. A demo web page source code
is available for user’s reference.
The key features are as follow:
NXP LPC1768 ARM Cortex-M3 100MHz
512KB on-chip flash, 64KB SRAM
Two configurable RS-232/422/485 serial ports
One 10/100Mbps Ethernet ports
One serial console port
Support lwIP and BSD socket library
Support tiny Web server and AJAX application
Windows configuration utility included
Support Telnet and serial console command
Toolchain: Sourcery CodeBench Lite (download from www.mentor.com)
1.1 Specification
System:
CPU: NXP LPC1768 Cortex-M3 100MHz
Serial port:
Port1: RS-232/422/485
Port2: RS-232/485
Baud rate: 1200 to 921600 bps
Flow control: None/Hardware/Xon_Xoff
Data bit: 5 to 8
Stop bit: 1 to 2
Protection: 15KV ESD
Ethernet:
10/100 Mbps, RJ45
Protection: 1500V Magnetic isolation
Serial console port:
RS-232: 115200 baud rate, None flow control, 8 bits data, 1 stop bit
Power: 9~40VDC power jack and terminal block
Dimension: 108 x 78 x 25 mm (H x W x D)
Operating Temperature: 0~70°C
Storage Temperature: -20~85°C

Aport-212PG User Guide
‧2‧
1.2 Packing List
Aport-212PG programmable device server
Software toolchain (download from Artila FTP)
Manager Utility (download from Artila FTP)
1.3 Optional Accessory
CB-RJ2CON-100 (91-RJCON-100): Console Cable (RJ45 to DB9 Female, 100cm)
DK-35A (36-DK35A-000): DIN RAIL Mounting Kit
PWR-12V-1A (31-62100-000): 110~240VAC to 12VDC 1A Power Adaptor

Aport-212PG User Guide
‧3‧
2. Layout
Power Jack
Power TB
Ethernet
Serial Console
Serial Port 1
Serial Port 2

Aport-212PG User Guide
‧4‧
3. Pin Assignment and Definition
3.1 Power Connector
Connecting 9~40VDC power line with the Aport-212PG terminal block or the power jack. If the power
is properly supplied, the Power LED will keep solid yellow color.
3.2 Serial Port Connector
Serial Port uses a Male DB9 connector and it includes RS-232, RS-422 or RS485 signal and pin
assignments are described as follow:
Pin No.
RS-232
RS-422
RS-485
1
DCD*
TXD-
-
2
RXD
TXD+
-
3
TXD
RXD+
DATA+
4
DTR*
RXD-
DATA-
5
GND
GND
GND
6
DSR*
-
-
7
RTS
-
-
8
CTS
-
-
9
-
-
-
3.3 LED Status
The LED provides the Aport-212PG operation information. The LED status is described as follow:
Power LED: Power LED keeps ON if power (+9VDC to +40VDC) is correctly input to Aport-212PG.
Ready LED: Ready LED keeps ON when Aport-212PG firmware is ready for operation.
Link/Act LED: Link and Activity LED will turn ON when the Ethernet cable is connected. When
there is network data traffic, this LED will flash.
RX/TX LED: The RX/TX LED is a dual color LED that indicates the serial data traffic. The Yellow
LED stands for receiving data and Green LED means transmitting data.
3.4 Factory Default Settings
IP Address: 192.168.2.127
Netmask: 255.255.255.0
Serial Port: RS-232
Baud rate: 115200
Data: No parity, 8 bits, 1 stop bit
Flow control: None
Serial Console port: RS-232
Baud rate: 115200
Data: No parity, 8 bits, 1 stop bit
Flow control: None

Aport-212PG User Guide
‧5‧
Web console: http://192.168.2.127:5003
Telnet console: telnet 192.168.2.127 5001

Aport-212PG User Guide
‧6‧
4. Artila Utility Software
4.1 Install Manager Utility Software
You can find many useful software utilities from Artila FTP. You need to install Manager Utility first in
order to configure the Aport-212PG. To install the Manager Utility, please find the
ManagerUtilitysetup.exe as shown following:
4.2 Broadcast Search
Once start Manager utility, you can click telescope icon to search the Aport-212PG in the network.
Click the device to configure its settings.