ARTIST PSW100 User manual
Thank you for purchasing Flanger FX-02 Professional Musician’s tool.
Please read this manual carefully before using the product.
Do not Exercise! Do more Practice!
TM
Of the Musician, By the Musician, For the Musician
TM
User Manual
FX-02
Artist PSW100 3 in 1 Power Winder Tool.
Warning
Do not disassemble or modify the product.
Do not use for other applications except for changing strings (never use as a motorized screw driver).
While charging, use a stable
USB port.
If you use an incompatible charging device, there is a risk of re,
and it could have an impact on the longevity of the battery as well as device functions.
Do not let liquids such as water get inside the device.
In the case that the battery becomes damaged, it is possible that liquids may leak. If this occurs, be
careful not to come into physical contact with them; if this should happen, rinse thoroughly with
running water. If they should come into contact with your eyes, rinse with running water and consult a
doctor immediately.
During use, if excessive power is applied or if the motor and/or rechargeable battery should overload, a
protection circuit will shut down the device. At this time, if you continuously press the On/O switch, the
device could become damaged.
Please do not store in direct sunlight, extreme heat or in places with excessive moisture.
Please avoid vibration, impact and/or dropping the device, and store it in a secure place.
Please keep away from children.
In the case where the pegs of the musical instrument have worn out or broken, the product may not
function properly.
■
When it is time to charge, connect the device directly to your computer via an available USB port.
Complete charging takes one hour and 20 minutes and when charging is completed, the charging
circuit will automatically shut down the power supply. In the case of a USB hub, it is possible that the
charging process may take longer.
■
When cutting, or storing your Penguin in a guitar case, set the direction selection switch to the
center to prevent unnecessary malfunction.
Precautions and Tips
■
■
■
■
■
■
■
■
■
■
PSW100
■Ergonomic design that comfortably ts in one hand, with an easily-portable compact size
■Multi functional tool with all the functions necessary for restringing work (String winder+ String cutter+
Bridge pin puller)
■ Optimized turning force for winding up the string via custom planetary gears.
■ With the lithium-Ion charging system, there is no need for an extra battery
(One charge has enough charge for 15~20 sets)
■Cutter blade uses intense heat-treated special steel
■Due to the multi-layer socket method employed, it is compatible with most acoustic, electric, and bass
guitars
■Built-in circuit for overload protection and prevention
Features
Name of Each part
1. On/O button
2. Direction selection switch
3. Tuning socket
4. Cutter ejection switch
5. Cutter handle
6. String cutter
7. Bridge pin puller
Specications
Turning speed
Torque
Product length
Weight
Battery
Charging method
220 ~ 180 rpm
1.8 kg-cm
15.8 cm
150 g
3.7v LI-Ion 750mA rechargeable battery
USB DC 5V
Restringing with the Patatuss Penguin
1. Place the instrument in a secure spot and carefully unwind the string with
the Penguin.
☞Caution | Removing the strings one at a time is recommended. Removing
all 6 guitar strings at the same time could cause problems due to rapid tension
change.
2. After inserting the bridge pin rmly into the bridge pin puller of the
Penguin, lift up, and the bridge pin will release smoothly.
☞Caution | In the case where the bridge pin has not been inserted fully into
the bridge pin puller, the leverage eect on the partially hooked pin can
damage the bridge of the guitar as well as the puller itself.
3. Insert a new string into the bridge hole and x it with the bridge pin. At this
point, pull the string in order to make sure that it is correctly xed.
4. After spreading the string across the string peg, cut it while leaving 4~5cm
of the 4th, 5th, and 6th strings and approximately 6~8cm of the 1st, 2nd, and
3rd strings.
☞Caution | When cutting the string, do not place your ngers between the
handle and body. You could injure yourself.
5. Insert guitar strings into the peg holes and wind up the string using the
Penguin. At this point, you should maintain the tension of the string by
pulling the string with your other hand. The number of times this should be
performed is between 2~3 in the case of the 4th, 5th, and 6th strings, and
approximately 4~6 times in the case of the 1st, 2nd, and 3rd strings.
☞Caution | Fine tuning is best done manually. Do not use this product to
wind the string all the way to end, or for tuning, since the strings could
become damaged. When winding up the string, arrange it evenly according
to the picture and wind up the peg at least 2~3 times so that correct, precise
tuning can be achieved.
6. Change the rest of the strings as outlined in steps 1~5.
7. Fine tuning should be directly nished by hand. At this point, even though
tuning has been completed, you should repeat the tuning process while
pulling the strings to ensure that accurate pitch can be maintained.
1
2
3
4
5
6
Artist String Winder
PSW100
PSW100
PSW100
