Yamaha PCY130 User manual

PCY130/130S/150S
OWNER’S MANUAL
INTRODUCTION
Thank you for purchasing the Yamaha PCY130/130S/150S Cymbal Pad.
The PCY130/130S/150S are designed as cymbal type trigger pads for use in an electric
drum system. The pads are designed using a round, cymbal like shape and carefully
selected pad material to deliver realistic feel and performance.
To get the most out of your PCY130/130S/150S, please read this Owner's Manual thor-
oughly. Also, after reading this manual, keep it in a safe place for future reference.
■Handling Precautions
•Do not disassemble or alter the product. Doing so may result in damage or deterioration to the product.
• Do not step on or place heavy objects on the product. It may result in damage.
•Do not use or keep the product in places with extremely high temperature (places in direct sunlight,
close to a heater, in a closed car, etc.) or damp (bathroom, outside on a rainy day, etc.). It may result in
deformation, discoloration, damage or deterioration.
•To clean the product, please wipe with a soft cloth or a damp cloth that been wrung out thoroughly, If
the product is soiled, use a neutral detergent on a cloth then wipe with a damp cloth that has been
wrung out thoroughly to remove any remaining detergent. Do not use benzine, thinner or alcohol as it
may result in discoloration or deformation. Also pay close attention so as not to let the water and
detergent come into contact with the cushions used in the product, it may result in deterioration.
•Make sure you hold onto the plug, not the cable, when connecting or disconnecting the cable. Also,
never place any heavy or sharp objects on the cable. Applying excessive force to the cable may result
in damage to the cable such as cutting the wires, etc.
保証書
この度はヤマハ・シンバルパッドPCY130/130S/150Sをお買上げ戴きましてありが
とうございます。本書は、本書記載内容で修理を行なう事をお約束するものです。お
買上げの日から下記期間中に故障が発生した場合は、本書をご提示の上お買上げの
販売店または最寄りのヤマハ電気音響製品サービス拠点に修理をご依頼ください。
1. 正常な使用状態（取扱説明書、本体貼り付けラベルなどの注意書に従った使用状態）で故障した場合には、お買上げの販売店
が無料修理を致します。
2. 保証期間内（6ヶ月間）に故障して無料修理をお受けになる場合は、お買上げの販売店に商品と本書をご持参のうえご依頼くだ
さい。
3. ご贈答品、ご転居後の修理についてお買上げ販売店にご依頼できない場合には、最寄りのヤマハ電気音響製品アフターサー
ビス拠点にお問い合わせください。
4. 保証期間内（6ヶ月間）でも次の場合は有料となります。
(1) 本書のご提示がない場合。
(2) 本書にお買上げの年月日、お客様、お買上げの販売店の記入がない場合、及び本書の字句を書き替えられた場合。
(3) 使用上の誤り、他の機器から受けた障害または不当な修理や改造による故障及び損傷。
(4) お買上げ後の移動、輸送、落下などによる故障及び損傷。
(5) 火災、地震、風水害、落雷、その他の天災地変、公害、塩害、異常電圧などによる故障及び損傷。
(6) 消耗部品の交換。
(7) お客様のご要望により出張修理を行なう場合の出張料金。
5. この保証書は日本国内においてのみ有効です。
ThiswarrantyisvalidonlyinJapan.
6. この保証書は再発行致しませんので大切に保管してください。
※この保証書は本書に示した期間、条件のもとにおいて無料修理をお約束するものです。したがってこの保証書によってお客
様の法律上の 権利を制限するものではありませんので、保証期間経過後の修理などについてご不明の場合は、お買上げの
販売店、ヤマハ電気音響製品アフターサービス拠点にお問い合わせください。
無償修理規定
ご販売店様へ※印欄は必ずご記入の上お渡しください。
持込修理
品名／品番
保証期間
※お買上げ日
お客様
※
販
売
店
シンバルパッドPCY130/130S/150S 製番
本 体：お買い上げの日から6ヶ月
年 月 日
住 所 〒
お名前 様
電 話 （ ）
印
（ ）
店 名
住 所
電 話
■Output Level Adjustment
Controls the level of the trigger output from the PCY130/130S/150S. Use a small screw-
driver, etc. to rotate the level adjustment knob.
Rotate the knob to the right (+) to increase the output level, or to the left (–) to decrease
output level. The pad's output level should be adjusted in regards to how hard you hit the
pad, to adjust the pad's dynamic range, or to better match the pad to the type of DTX
Series Drum Trigger Module (DTXPRESS/DTX/DTXTREME) you are using.
■Replacing Worn Pads
•After extended use, some of the parts used on the PCY130/130S/150S will wear out
or their quality will deteriorate (pad rubber, connecting jacks, etc.). The life of these
parts will vary depending upon the circumstances under which the PCY130/130S/
150S is used.
•Please ask the dealer from whom you purchased the device about replacing worm
parts.
Level
Adjustment Screw
Adjusting the Voice Volume
To change the volume of the voice assigned to the PCY130/130S/150S pad, use
the [VOICE] edit mode in the DTX Series Drum Trigger Module. Please refer to the
Owner's Manual that came with your module for more information.
NOTE: When the PCY130/130S/150S is used with a DTX Series Drum Trigger Module (DTXTREME/
DTX/DTXPRESS), enter the module's Trigger Edit Mode and set the [PAD Gain] (pad input
level) parameter so that the display reads 90-95% when the pad is struck ff. Refer to the
Owner's Manual that came with your module for more information.
If the output level is too high, the pad's dynamic range (the difference between loud and soft
tone) will be reduced and trouble such as double triggers (multiple triggers being produced by
a single stroke) may occur.
Do not put excessive pressure on the level adjustment knob, it may result in damage.
■Inside This Package
Before setup, please make sure that all of the items listed below are present and ac-
counted for. If anything is missing, please contact the dealer from whom you purchased
the unit.
* To customers who purchased a pads set (DTPK95MSP etc.), please refer to the
attached “Accessories List”sheet included with each pads set when confirming
package contents.
•Stopper X1
◆PCY130
• PCY130 Main Unit X1
• Stereo Phone Cable X1
◆PCY130S
• PCY130S Main Unit X1
◆PCY150S
• PCY150S Main Unit X1
•Owner’s Manual
(this sheet) X1
The connector has two black
rings. (The monaural type con-
nector has one black ring.)
•Felt (Thin Type) X1

■Part Names
■Setting Up
First setup the rack system (Yamaha RS150, etc.) or a commercially available cymbal stand
(Yamaha CS series, etc.) and then attach the PCY130/130S/150S as shown in the illustration.
1.First, insert the stopper underneath the
cymbal support, and then use a drum key
(optional) to secure.
2.Set the PCY130/130S/150S so that the
rotation stopper plate fits between the ro-
tation stopper ribs located on the under-
side of the PCY130/130S/150S.
Make sure that the pad is securely attached to the rack or stand. If the bolt is not tightened
securely, the pad can slip or fall down causing injury. Also, if the rack or stand is placed on an
unstable surface, etc., the rack or stand can fall over resulting in injury.
◆ PCY130S◆ PCY130 ◆ PCY150S
(Switches are embedded in the edge section on the PCY130S and edge and cup sections on the PCY150S)
Pad
Level Adjustment Knob
Pad Pad Output Jack
Cup
Edge Edge
Level Adjustment Knob
Rotation Stopper Ribs Rotation Stopper Ribs
Output Jack
■Connections
Using the supplied stereo phone cable, connect the output jack on the PCY130/130S/
150S to the input jack on the DTX Series drum Trigger Module (DTXTREME/DTX/
DTXPRESS). Insert the L-shaped connector into the output jack on the PCY130/130S/
150S.
Function of the PCY130/130S/150S varies according to which INPUT number on the
DTX Series Drum Trigger Module the pad is connected. The chart below describes its
function in relation to input numbers.
*Make sure you set the module's pad type setting to cymbal. (Refer to the Owner's Manual that came
with your module.)
●：A single voice can be assigned to, and produced
by the pad.
○：Independent voices can be assigned to and pro-
duced by the pad and edge section (Dual Zone;
The cup and pad sections share the same voice).
A choke function (grabbing the edge section stops
the voice being produced by the pad) is also avail-
able.
□：Independent voices can be assigned to and pro-
duced by the pad section, and the edge/cup sec-
tions (Dual Zone; The edge and cup sections
share the same voice).
A choke function (grabbing the edge section stops
the voice being produced by the pad) is also avail-
able.
◎：Independent voices can be assigned to and pro-
duced by the pad section, edge switch, and cup
section (3 Zone).
A choke function (grabbing the edge stops the
voice being produced by the pad) is also avail-
able.
△：Independent voices can be assigned to and pro-
duced by the pad and cup section (Dual Zone;
the edge switch is inactive).
*： A mute function (holding the edge section pro-
duces an alternate sound when the pad is hit) is
also available.
*Make sure a stereo phone cable is used when connecting the PCY130S/150S to the module. The
switch functions described above will not function with a monaural phone cable. (Only the voice
assigned to the pad can be produced.)
Since the PCY130 does not incorporate a edge switch, use of a monaural phone cable is allowed.
Module Input Number PCY130 PCY130S PCY150S
DTXTREME s1〜8 ●○*◎*
9/10〜15/16 ●●●
DTXPRESS 1 ●○△
DTXPRESS 2,6,7 ●○◎
3〜5,8 ●○□
9/10 ●●●
DTXTREME 1〜5 ●○*△*
6〜8 ●○*□*
9/10〜15/16 ●●●
DTXPRESS 1 ●○△
2〜8 ●○□
9/10 ●●●
DTX 1〜8 ●○*□*
9/10,11/12 ●●●
■Troubleshooting
If the following trouble occurs when the PCY130/130S/150S is used, please check the
following points before asking your dealer for assistance.
●No Sound, Volume is Low
What to check
Problem
Is the PCY130/130S/150S properly
connected to the DTX Series Drum
Trigger Module with the supplied ste-
reo phone cable? (A monaural phone
cable can be used with the PCY130.)
Refer to the previous [Connections] section and make sure
that all connections are proper.
Is the Level Adjustment Screw on
the PCY130/130S/150S set too
low?
If the Level Adjustment Screw is set too low, the single pro-
duced by the pad will be too low to produce sufficient volume
from the drum trigger module’s tone generator even though
the pad is struck.
Is the module properly con-
nected to a pair of headphones
or an external audio device such
as an amplifier, speaker, etc.?
Check the connections between the external device and the
position of the power switch and volume level.
Are module settings correct?
Check the volume setting of the voice assigned to the INPUT
number to which the PCY130/130S/150S is connected (refer
to the previous "Adjusting the Voice Volume" section), or make
sure the headphones volume level is not set too low, etc.
Also, please refer to the Owner's Manual that came with your DTX Series Drum Trigger Module
(DTXTREME/DTX/DTXPRESS) for more information regarding the problems described above and any
other problems that you may be experiencing.
If a solution can not be found to the problem after consulting the manuals, please contact the dealer from
whom you purchased the product.
■Specifications
●Hitting the pad once produces multiple sounds (Double trigger)
What to checkProblem
Is the level adjustment on the
PCY130/130S/150S set too high?
Too high of a the level adjustment setting causes the drum
module to produce multiple sounds because the large signal
produced by the high settings sustains for too long of a time.
Refer to the "Output Level Adjustment" section described
above to properly set the pad's output level.
●The edge or cup sections do not produce sound when struck. The Mute or
Choke functions do not work.
What to check
Problem
Is the PCY130S/150S connected
to the correct INPUT number on
the DTX Series Drum Trigger
Module using the supplied ste-
reo phone cable?
Refer to the "Connections" section described above and
make sure the PCY130S/150S is connected to the correct
INPUT number.
When a monaural phone cable is used, the voices assigned
to the edge and cup sections are not produced.
Since the PCY130 is not equipped with a edge switch, switch
functions cannot be used (refer to the "Connections" sec-
tion).
Are module settings correct? Refer to the section on trigger settings in the Owner's Manual
that came with your module and make sure settings are cor-
rect.
●PCY130 Cymbal Pad (13”) ●PCY130S Cymbal Pad (13”)
Size ø329 X 68(H) mm
Weight 1.4kg
Sensor System Tr igger Sensor (Piezo) x 1 Trigger Sensor (Piezo) x 1 / Edge Switch x 1
Output Jack Standard Monaural Phone Jack Standard Stereo Phone Jack
Printed in Indonesia
WF75960
Output Jack
Insert
Stopper
Cymbal Support
Felt *
Wing Nut
Rotation Stopper Ribs
*The PCY130/130S/150s is supplied with thin
felts. Pad vibration can be adjusted by using these
felts in place of those that came with the rack
system or cymbal stand.
NOTE:The PCY130/130S/150S is supplied with
a stopper that allows positioning of the
pad at any angle when used. When using
the stopper, please attach as shown in the
illustration.
SPECIAL MESSAGE SECTION
NOTICE: Service charges incurred due to a lack of knowledge relathing to how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual
carefuly and consult your dealer before requesting service.
ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely
believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the
spirit of the law, we want you to be aware of the following:
Warning: Do not attempt to disassemble.
Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end,
please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, plastics, etc. If your
dealer is unable to assist you, please contact Yamaha directly.
NAME PLATE LOCATIOIN: The name plate is located on the bottom of the product. The model number, serial number are located on
this plate.
You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as
a permanent record of your purchase.
Model : PCY130 Serial No. Model : PCY130S Serial No.
Model : PCY150S Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
* Improvements may result in a change in the specifications and/or design of the product without notice.
Size ø386 X 70(H) mm
Weight 1.8kg
Sensor System Tr igger Sensor (Piezo) x 1 / Switch x 2 (Edge, Cup)
Output Jack Standard Stereo Phone Jack
●PCY150S Cymbal Pad (15”)