Arvig Mesh Device User manual

Components required:
INTERNET
Mesh Device
Installation Guide
Don’t forget to contact us
to complete your upgrade!
©Arvig 2018. This institution is an equal opportunity provider and employer.
877.290.0560
arvig.net/selnstall
Components required:
Mesh
Device power cord

Step 1: Remove the new Mesh Device from the box
and place it on a desk or table. Remove the clear
plastic covers from the device—do not block vents.
Step 2: Place the Mesh Device near the router, and
use the provided power cord to connect the POWER
socket to an appropriate power source.
Step 3: Once the POWER light is solid, press
and hold the WPS button on your router for
about 5 seconds. When you let go, the WPS
light should be ashing orange.
If ashing green, wait about 3 minutes; once it shuts
o, repeat step 3. If it ashes green again, please call 877.290.0560.
Step 4: Once the WPS light on the
router is ashing orange, press and
hold the WPS button on the back of the
Mesh Device for about 5 seconds to
begin the pairing (syncing) process. The
four WiFi Backhaul lights on the top of
the Mesh Device will ash green.
Step 5: Once paired, the four WiFi
Backhaul lights will show one red and
three green. Unplug the Mesh Device
from power and move to the desired
location. Plug the device into an
appropriate power source and note the
four lights on top:
The Mesh Device is too close to the router.
The Mesh Device is a bit close yet, but will work.
The Mesh Device placement is optimal.
The Mesh Device will produce adequate results.
The Mesh Device is too far from the router.
Step 6: Complete our online form at arvig.net/selnstall
to complete the setup process. Or, call Arvig Technical
Support at 877.290.0560 for assistance. We’re also
available via online chat at arvig.net.
Verify your new internet speed by testing it
at speedtest.arvig.com.
----------------------------------------------------------------------------------------------------------------------------- -----------------------------------
----------------------------------------------------------------------------------------------- -----------------------------------------------------------------
Page 2
EASY TO INSTALL, ACTIVATE AND MAINTAIN: With the 804Mesh satellites, Calix has redefined how to install and activate
residential services. When deployed with a wired connection it’s as simple as plugging a Cat 5/6 cable in between the 804Mesh
RJ-45 port and the parent GigaCenter. The 804Mesh leverages its TR-69 interface to communicate its presence to the Calix
Support Cloud/CC+, which adds the 804Mesh to the subscriber account. The system harmonizea the services on the 804Mesh.
This removes all human error prone touch points. When deployed with a wireless connection, there is one additional step
required. The end subscriber pairs the 804Mesh to the GigaCenter by interacting with the Wi-Fi Protected Setup (WPS) button.
Once this step is done, the same discovery, configuration and harmonization steps occur. The 804Mesh has an innovative signal
strength bar indicator, making it simple for subscribers to identify the best placement location. The same Calix Support
Cloud/CC+ extensive troubleshooting capabilities, remote software downloads and easy-to-use service activation features
ensure that services are delivered and maintained without needless truck rolls and hardware upgrades. Employing GigaCenters
and 804Mesh satellites allows CSPs to reduce their operational expenses while effectively delivering an elevated Gigabit
experience to their subscribers.
Front
Back
----------------------------------------------------------------------------------------------------------------------------- -----------------------------------
----------------------------------------------------------------------------------------------- -----------------------------------------------------------------
Page 2
EASY TO INSTALL, ACTIVATE AND MAINTAIN: With the 804Mesh satellites, Calix has redefined how to install and activate
residential services. When deployed with a wired connection it’s as simple as plugging a Cat 5/6 cable in between the 804Mesh
RJ-45 port and the parent GigaCenter. The 804Mesh leverages its TR-69 interface to communicate its presence to the Calix
Support Cloud/CC+, which adds the 804Mesh to the subscriber account. The system harmonizea the services on the 804Mesh.
This removes all human error prone touch points. When deployed with a wireless connection, there is one additional step
required. The end subscriber pairs the 804Mesh to the GigaCenter by interacting with the Wi-Fi Protected Setup (WPS) button.
Once this step is done, the same discovery, configuration and harmonization steps occur. The 804Mesh has an innovative signal
strength bar indicator, making it simple for subscribers to identify the best placement location. The same Calix Support
Cloud/CC+ extensive troubleshooting capabilities, remote software downloads and easy-to-use service activation features
ensure that services are delivered and maintained without needless truck rolls and hardware upgrades. Employing GigaCenters
and 804Mesh satellites allows CSPs to reduce their operational expenses while effectively delivering an elevated Gigabit
experience to their subscribers.
Front
Back
----------------------------------------------------------------------------------------------------------------------------- -----------------------------------
----------------------------------------------------------------------------------------------- -----------------------------------------------------------------
Page 2
EASY TO INSTALL, ACTIVATE AND MAINTAIN: With the 804Mesh satellites, Calix has redefined how to install and activate
residential services. When deployed with a wired connection it’s as simple as plugging a Cat 5/6 cable in between the 804Mesh
RJ-45 port and the parent GigaCenter. The 804Mesh leverages its TR-69 interface to communicate its presence to the Calix
Support Cloud/CC+, which adds the 804Mesh to the subscriber account. The system harmonizea the services on the 804Mesh.
This removes all human error prone touch points. When deployed with a wireless connection, there is one additional step
required. The end subscriber pairs the 804Mesh to the GigaCenter by interacting with the Wi-Fi Protected Setup (WPS) button.
Once this step is done, the same discovery, configuration and harmonization steps occur. The 804Mesh has an innovative signal
strength bar indicator, making it simple for subscribers to identify the best placement location. The same Calix Support
Cloud/CC+ extensive troubleshooting capabilities, remote software downloads and easy-to-use service activation features
ensure that services are delivered and maintained without needless truck rolls and hardware upgrades. Employing GigaCenters
and 804Mesh satellites allows CSPs to reduce their operational expenses while effectively delivering an elevated Gigabit
experience to their subscribers.
Front
Back